[Tue Sep  4 06:34:57 2012] Detection parameters:
  Position = (290.3, 296.2) = 2 5 56.67 64 49 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 414.1 +/- 33.7
  Background counts = 185.5
  Rate = 0.02 +/- 0.002

[Tue Sep  4 06:34:58 2012] Off-axis axis estimate = 0.61'
[Tue Sep  4 06:37:55 2012] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 06:37:55 2012] Initial guess for spatial extent in simple fitting = 6.74"
[Tue Sep  4 06:37:55 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.953
[Tue Sep  4 06:37:55 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 6.74"
[Tue Sep  4 07:51:50 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src29.ximg exists
[Tue Sep  4 07:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src29.csv
[Tue Sep  4 07:51:50 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Sep  4 07:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src29.csv
[Tue Sep  4 07:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 07:51:50 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Sep  4 07:51:50 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Sep  4 07:51:50 2012] Fit fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Sep  4 10:13:35 2012] Spatial fit model total counts = 1343.350000, observed total counts = 1228.000000
[Tue Sep  4 10:13:35 2012] Offset between fit and detection position for source 30 = 0.681639 pixels
[Tue Sep  4 10:13:35 2012] 1308.972900 total counts/ 1242.270000 bgd. counts: snr = 1.892504
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.681639 pixels
  Position = (289.6, 296.2) = 2 5 57.14 64 49 13.9
  Extent = 8.2 (3.3-13.5)", rotation angle = 0
  Source counts = 66.7 +/- 36.2
  Background counts = 1242.3
  Rate = 0.007 +/- 0.004
[Tue Sep  4 10:13:35 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 10:13:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 10:13:35 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 10:13:35 2012] Source does appear to be extended
[Tue Sep  4 10:13:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 10:13:35 2012] Source is confused with source 24
[Tue Sep  4 10:13:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 10:13:54 2012] Initial guess for spatial extent in simple fitting = 8.20"
[Tue Sep  4 10:13:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.098
[Tue Sep  4 10:13:54 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.20"
[Tue Sep  4 11:38:10 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src26.ximg exists
[Tue Sep  4 11:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src26.csv
[Tue Sep  4 11:38:10 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Sep  4 11:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src26.csv
[Tue Sep  4 11:38:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 11:38:11 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Sep  4 11:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Sep  4 11:38:11 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Sep  4 11:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Sep  4 11:38:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 14:19:07 2012] Spatial fit model total counts = 1294.320000, observed total counts = 1145.000000
[Tue Sep  4 14:19:07 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 14:19:07 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 14:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 14:19:07 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 14:19:07 2012] Source does appear to be extended
[Tue Sep  4 14:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 14:19:28 2012] XMMSAS src. selection expression = ellipse(25144.959000, 25717.265400, 492.084014, 492.084014, 0.000000, X, Y)
[Tue Sep  4 14:19:28 2012] Writing source region out to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src30_src.reg
[Tue Sep  4 14:19:28 2012] Extracting stamp from image fullrun_pn_xmm0102580601_pi300-10000_cl_sm2.00.img.gz, (261, 268) - (318, 324)
[Tue Sep  4 14:19:28 2012] XMMSAS bgd. selection expression = annulus(25144.959000, 25717.265400, 820.140024, 1640.280047, X, Y) && !ellipse(27371.243378, 25015.496948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.876160, 26302.522400, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25326.416809, 27383.368896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23406.650085, 26486.457520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.959137, 26704.443390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25613.141388, 26394.378448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23908.503723, 26572.469849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25657.729950, 25802.476837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22809.222600, 25970.700200, 875.080025, 875.080025, 0.000000, X, Y) && !ellipse(23999.141113, 25335.329742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25806.541687, 25274.088837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27342.866425, 23668.117371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27976.664180, 23889.608000, 1288.472037, 700.220020, 70.415000, X, Y)
[Tue Sep  4 14:19:28 2012] Writing fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src30.gif
[Tue Sep  4 14:42:16 2012] Mean detx,y = (-1450.93, 2133.86) 
[Tue Sep  4 14:42:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 14:42:26 2012] grppha failed
[Tue Sep  4 14:42:27 2012] Setting source spectrum file to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src30_src.pi.gz
[Tue Sep  4 14:42:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Sep  4 14:44:59 2012] Not generating rmf since there are only 66 counts
[Tue Sep  4 14:44:59 2012] rmf not generated due to insufficient counts
[Tue Sep  4 15:00:44 2012] Updating aperture counts using extracted products
[Tue Sep  4 15:00:44 2012] Error reading totcts from fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src30_src.pi.gz
[Tue Sep  4 15:00:44 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 15:00:48 2012] Flag p found in src. 30 procflags, skipping spectral fitting
[Tue Sep  4 15:00:48 2012] Flag c found in src. 30 procflags, skipping spectral fitting
[Tue Sep  4 15:00:48 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep  4 15:00:49 2012] xmm0102580601/analysis//spectral/fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete