[Tue Sep 4 06:34:57 2012] Detection parameters: Position = (317.5, 302.9) = 2 5 38.09 64 49 43.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 14126.2 +/- 142.6 Background counts = 211.5 Rate = 0.7 +/- 0.007 [Tue Sep 4 06:34:58 2012] Off-axis axis estimate = 1.42' [Tue Sep 4 06:37:55 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting [Tue Sep 4 06:37:55 2012] Initial guess for spatial extent in simple fitting = 7.14" [Tue Sep 4 06:37:55 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.091 [Tue Sep 4 06:37:55 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.14" [Tue Sep 4 07:51:49 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src2.ximg exists [Tue Sep 4 07:51:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src2.csv [Tue Sep 4 07:51:49 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src2_1.ximg exists [Tue Sep 4 07:51:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src2.csv [Tue Sep 4 07:51:49 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 07:51:50 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Tue Sep 4 07:51:50 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Tue Sep 4 07:51:50 2012] Fit fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Tue Sep 4 10:13:35 2012] Source 2 is offset by 1.380246 and 7.318234 pixels which is larger than 2 X fitted extent = 4.781333 x 4.781333, not incorporating fit results [Tue Sep 4 10:13:35 2012] Source 2 is offset by 7.074232 and 6.449476 pixels which is larger than 2 X fitted extent = 0.820520 x 0.820520, not incorporating fit results [Tue Sep 4 10:13:35 2012] Source 2 is offset by -1.588734 and 7.518051 pixels which is larger than 2 X fitted extent = 4.856414 x 4.856414, not incorporating fit results [Tue Sep 4 10:13:35 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 10:13:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 10:13:35 2012] Assessing source extent using major [Tue Sep 4 10:13:35 2012] Source does appear to be extended [Tue Sep 4 10:13:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 10:13:54 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting [Tue Sep 4 10:13:54 2012] Initial guess for spatial extent in simple fitting = 7.14" [Tue Sep 4 10:13:54 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.091 [Tue Sep 4 10:13:54 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.14" [Tue Sep 4 11:38:09 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src2.ximg exists [Tue Sep 4 11:38:09 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src2_1.ximg exists [Tue Sep 4 11:38:09 2012] Fit fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src2 appears to have run properly [Tue Sep 4 11:38:10 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Tue Sep 4 11:38:10 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Tue Sep 4 11:38:10 2012] Fit fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Tue Sep 4 14:19:06 2012] Source 2 is offset by 1.602386 and 7.318234 pixels which is larger than 2 X fitted extent = 4.673150 x 4.673150, not incorporating fit results [Tue Sep 4 14:19:06 2012] Source 2 is offset by 7.074232 and 6.449476 pixels which is larger than 2 X fitted extent = 0.820520 x 0.820520, not incorporating fit results [Tue Sep 4 14:19:07 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 14:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 14:19:07 2012] Assessing source extent using major [Tue Sep 4 14:19:07 2012] Source does appear to be extended [Tue Sep 4 14:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 14:19:28 2012] Counts = 14126.192383, rescaling region sizes by 3.000000 [Tue Sep 4 14:19:28 2012] XMMSAS src. selection expression = ellipse(27574.876160, 26302.522400, 1957.500000, 1957.500000, 0.000000, X, Y) [Tue Sep 4 14:19:28 2012] Writing source region out to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src2_src.reg [Tue Sep 4 14:19:28 2012] Extracting stamp from image fullrun_pn_xmm0102580601_pi300-10000_cl_sm2.00.img.gz, (205, 190) - (430, 415) [Tue Sep 4 14:19:28 2012] XMMSAS bgd. selection expression = annulus(27574.876160, 26302.522400, 9787.500000, 19575.000000, X, Y) && !ellipse(27371.243378, 25015.496948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28651.761353, 27301.795776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12563.222366, 34926.405365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28907.622980, 17923.757000, 363.084010, 363.084010, 0.000000, X, Y) && !ellipse(27912.341003, 28883.476379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37890.618134, 28836.623077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29446.573578, 27461.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30312.630859, 27348.938477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25326.416809, 27383.368896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41549.806061, 26822.414307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31233.432000, 26800.581200, 1367.728039, 1367.728039, 0.000000, X, Y) && !ellipse(23406.650085, 26486.457520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.959137, 26704.443390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30226.018494, 26578.788818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25613.141388, 26394.378448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.028000, 26546.365000, 1319.320038, 1319.320038, 0.000000, X, Y) && !ellipse(23908.503723, 26572.469849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30173.780792, 26147.102295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31059.272888, 26310.099854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25657.729950, 25802.476837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29423.907593, 25422.584625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22809.222600, 25970.700200, 875.080025, 875.080025, 0.000000, X, Y) && !ellipse(23999.141113, 25335.329742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30412.130737, 25531.876251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25806.541687, 25274.088837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25144.959000, 25717.265400, 656.112019, 656.112019, 0.000000, X, Y) && !ellipse(28333.858765, 25006.533569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29583.339447, 24594.550018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27342.866425, 23668.117371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27976.664180, 23889.608000, 1288.472037, 700.220020, 70.415000, X, Y) && !ellipse(37513.402191, 17630.698898, 870.000000, 870.000000, 0.000000, X, Y) [Tue Sep 4 14:19:28 2012] Writing fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src2.gif [Tue Sep 4 14:21:51 2012] Mean detx,y = (-174.65, 73.66) [Tue Sep 4 14:21:56 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 14:30:37 2012] grppha failed [Tue Sep 4 14:30:38 2012] Setting source spectrum file to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src2_src.pi.gz [Tue Sep 4 14:30:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src2_bgd.pi.gz [Tue Sep 4 14:44:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Sep 4 14:44:56 2012] rmf not generated due to insufficient counts [Tue Sep 4 15:00:44 2012] Updating aperture counts using extracted products [Tue Sep 4 15:00:44 2012] Error reading totcts from fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src2_src.pi.gz [Tue Sep 4 15:00:44 2012] No arf file for this source, not re-computing flux [Tue Sep 4 15:00:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Sep 4 15:00:49 2012] xmm0102580601/analysis//spectral/fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete