[Tue Sep 4 06:34:57 2012] Detection parameters: Position = (356.3, 307.2) = 2 5 11.67 64 49 59.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 242.8 +/- 26.6 Background counts = 176.1 Rate = 0.01 +/- 0.001 [Tue Sep 4 06:34:58 2012] Off-axis axis estimate = 4.24' [Tue Sep 4 06:37:55 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting [Tue Sep 4 06:37:55 2012] Initial guess for spatial extent in simple fitting = 8.55" [Tue Sep 4 06:37:55 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.987 [Tue Sep 4 06:37:55 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.55" [Tue Sep 4 07:51:49 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src15.ximg exists [Tue Sep 4 07:51:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src15.csv [Tue Sep 4 07:51:49 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src15_1.ximg exists [Tue Sep 4 07:51:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src15.csv [Tue Sep 4 07:51:49 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 07:51:50 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Tue Sep 4 07:51:50 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Tue Sep 4 07:51:50 2012] Fit fullrun_pn_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Tue Sep 4 10:13:35 2012] Spatial fit model total counts = 985.741000, observed total counts = 918.000000 [Tue Sep 4 10:13:35 2012] Offset between fit and detection position for source 15 = 3.607680 pixels [Tue Sep 4 10:13:35 2012] 910.156000 total counts/ 755.177000 bgd. counts: snr = 5.639602 Spatial fit parameters: Offset between fit and detection position for source 15 = 3.607680 pixels Position = (359.6, 308.6) = 2 5 9.41 64 50 7.7 Extent = 17.1 (17.1-34.2)", rotation angle = 0 Source counts = 155.0 +/- 30.2 Background counts = 755.2 Rate = 0.02 +/- 0.003 [Tue Sep 4 10:13:35 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 10:13:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 10:13:35 2012] Assessing source extent using major axis lower bound [Tue Sep 4 10:13:35 2012] Source does appear to be extended [Tue Sep 4 10:13:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 10:13:35 2012] Source is confused with source 23 [Tue Sep 4 10:13:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Sep 4 10:13:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Sep 4 10:13:54 2012] Initial guess for spatial extent in simple fitting = 17.10" [Tue Sep 4 10:13:54 2012] source mask rpix=3.9, npix_max = 78, mask sum = 77, frac = 0.981 [Tue Sep 4 10:13:54 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 17.10" [Tue Sep 4 11:38:10 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src12.ximg exists [Tue Sep 4 11:38:10 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src12_1.ximg exists [Tue Sep 4 11:38:10 2012] Fit fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_src12 appears to have run properly [Tue Sep 4 11:38:10 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Tue Sep 4 11:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src12.csv [Tue Sep 4 11:38:10 2012] fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Tue Sep 4 11:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src12.csv [Tue Sep 4 11:38:10 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 14:19:07 2012] Warning, spatial fit 12 centroid is now closest to src. 12 [Tue Sep 4 14:19:07 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 14:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 14:19:07 2012] Assessing source extent using major axis lower bound [Tue Sep 4 14:19:07 2012] Source does appear to be extended [Tue Sep 4 14:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 14:19:28 2012] XMMSAS src. selection expression = ellipse(31233.432000, 26800.581200, 1025.796030, 1025.796030, 0.000000, X, Y) [Tue Sep 4 14:19:28 2012] Writing source region out to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src15_src.reg [Tue Sep 4 14:19:28 2012] Extracting stamp from image fullrun_pn_xmm0102580601_pi300-10000_cl_sm2.00.img.gz, (301, 250) - (419, 368) [Tue Sep 4 14:19:28 2012] XMMSAS bgd. selection expression = annulus(31233.432000, 26800.581200, 1709.660049, 3419.320098, X, Y) && !ellipse(27371.243378, 25015.496948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.876160, 26302.522400, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28651.761353, 27301.795776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27912.341003, 28883.476379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29446.573578, 27461.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30312.630859, 27348.938477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30226.018494, 26578.788818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29722.028000, 26546.365000, 1319.320038, 1319.320038, 0.000000, X, Y) && !ellipse(30173.780792, 26147.102295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31059.272888, 26310.099854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29423.907593, 25422.584625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30412.130737, 25531.876251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28333.858765, 25006.533569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29583.339447, 24594.550018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27342.866425, 23668.117371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27976.664180, 23889.608000, 1288.472037, 700.220020, 70.415000, X, Y) [Tue Sep 4 14:19:28 2012] Writing fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src15.gif [Tue Sep 4 14:35:18 2012] Mean detx,y = (1898.59, -2828.33) [Tue Sep 4 14:35:21 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 14:35:56 2012] grppha failed [Tue Sep 4 14:35:56 2012] Setting source spectrum file to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src15_src.pi.gz [Tue Sep 4 14:35:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src15_bgd.pi.gz [Tue Sep 4 15:00:44 2012] Updating aperture counts using extracted products [Tue Sep 4 15:00:44 2012] Error reading totcts from fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src15_src.pi.gz [Tue Sep 4 15:00:44 2012] No arf file for this source, not re-computing flux [Tue Sep 4 15:00:48 2012] Flag c found in src. 15 procflags, skipping spectral fitting [Tue Sep 4 15:00:48 2012] Source 15 has no response, skipping [Tue Sep 4 15:00:49 2012] xmm0102580601/analysis//spectral/fullrun_pn_xmm0102580601_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete