[Tue Sep  4 06:35:47 2012] Detection parameters:
  Position = (325.3, 282.1) = 2 5 32.79 64 48 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 421.1 +/- 30.7
  Background counts = 84.4
  Rate = 0.01 +/- 0.001

[Tue Sep  4 06:35:48 2012] Off-axis axis estimate = 2.28'
[Tue Sep  4 09:02:49 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 09:02:49 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Tue Sep  4 09:02:49 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.997
[Tue Sep  4 09:02:49 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.57"
[Tue Sep  4 10:13:25 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src4.ximg exists
[Tue Sep  4 10:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src4.csv
[Tue Sep  4 10:13:25 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Sep  4 10:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src4.csv
[Tue Sep  4 10:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 10:13:26 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Sep  4 10:13:26 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Sep  4 10:13:26 2012] Fit fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Sep  4 10:13:46 2012] Spatial fit model total counts = 2262.540000, observed total counts = 2185.000000
[Tue Sep  4 10:13:46 2012] Offset between fit and detection position for source 3 = 0.902537 pixels
[Tue Sep  4 10:13:46 2012] 2226.274000 total counts/ 2057.120000 bgd. counts: snr = 3.729516
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.902537 pixels
  Position = (326.1, 281.7) = 2 5 32.23 64 48 11.0
  Extent = 10.1 (6.2-15.1)", rotation angle = 0
  Source counts = 169.2 +/- 47.2
  Background counts = 2057.1
  Rate = 0.007 +/- 0.002
[Tue Sep  4 10:13:46 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 10:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 10:13:46 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 10:13:46 2012] Source does appear to be extended
[Tue Sep  4 10:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 13:11:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 13:11:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep  4 13:11:32 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Tue Sep  4 13:11:32 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135
[Tue Sep  4 13:11:32 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.08"
[Tue Sep  4 14:18:58 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src4.ximg exists
[Tue Sep  4 14:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src4.csv
[Tue Sep  4 14:18:58 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Sep  4 14:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src4.csv
[Tue Sep  4 14:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 14:18:58 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Sep  4 14:18:58 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Sep  4 14:18:58 2012] Fit fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Sep  4 14:19:18 2012] Warning, spatial fit 4 centroid is now closest to src. 23
[Tue Sep  4 14:19:18 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 14:19:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 14:19:18 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 14:19:18 2012] Source does appear to be extended
[Tue Sep  4 14:19:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 14:53:17 2012] XMMSAS src. selection expression = ellipse(28325.305600, 24461.120800, 604.590017, 604.590017, 0.000000, X, Y)
[Tue Sep  4 14:53:17 2012] Writing source region out to fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src3_src.reg
[Tue Sep  4 14:53:17 2012] Extracting stamp from image fullrun_mos2_xmm0102580601_pi300-10000_cl_sm2.00.img.gz, (291, 247) - (361, 316)
[Tue Sep  4 14:53:17 2012] XMMSAS bgd. selection expression = annulus(28325.305600, 24461.120800, 1007.650029, 2015.300058, X, Y) && !ellipse(27559.599600, 26274.796200, 500.644814, 500.644814, 0.000000, X, Y) && !ellipse(27603.595612, 24630.573456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.049042, 25428.587646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29054.568000, 25970.242000, 1274.288037, 1274.288037, 0.000000, X, Y) && !ellipse(26044.012000, 26692.371800, 1086.232031, 1086.232031, 0.000000, X, Y) && !ellipse(27915.848000, 27426.898000, 1251.208036, 1251.208036, 0.000000, X, Y) && !ellipse(30331.423157, 26406.307495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.338928, 25272.992310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30166.980000, 24865.238000, 1274.288037, 1274.288037, 0.000000, X, Y) && !ellipse(28191.672000, 28779.916000, 2502.416072, 2502.416072, 0.000000, X, Y) && !ellipse(29544.029083, 25268.738953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31184.000000, 26606.564000, 1200.784035, 1200.784035, 0.000000, X, Y) && !ellipse(29156.840851, 24415.202789, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 14:53:17 2012] Writing fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src3.gif
[Tue Sep  4 14:53:58 2012] Mean detx,y = (-1441.05, -834.51) 
[Tue Sep  4 14:53:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 14:54:07 2012] grppha failed
[Tue Sep  4 14:54:07 2012] Setting source spectrum file to fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Sep  4 14:54:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Sep  4 15:00:44 2012] Updating aperture counts using extracted products
[Tue Sep  4 15:00:44 2012] Error reading totcts from fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Sep  4 15:00:45 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 15:00:47 2012] Source 3 has no response, skipping
[Tue Sep  4 15:00:48 2012] xmm0102580601/analysis//spectral/fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete