[Tue Sep  4 06:35:47 2012] Detection parameters:
  Position = (317.4, 302.8) = 2 5 38.15 64 49 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8743.2 +/- 111.9
  Background counts = 98.3
  Rate = 0.3 +/- 0.004

[Tue Sep  4 06:35:48 2012] Off-axis axis estimate = 1.41'
[Tue Sep  4 09:02:49 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 09:02:49 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Tue Sep  4 09:02:49 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.092
[Tue Sep  4 09:02:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.14"
[Tue Sep  4 10:13:25 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src1.ximg exists
[Tue Sep  4 10:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src1.csv
[Tue Sep  4 10:13:25 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Sep  4 10:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src1.csv
[Tue Sep  4 10:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 10:13:26 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep  4 10:13:26 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep  4 10:13:26 2012] Fit fullrun_mos2_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep  4 10:13:46 2012] Spatial fit model total counts = 11861.600000, observed total counts = 11838.000000
[Tue Sep  4 10:13:46 2012] Offset between fit and detection position for source 2 = 0.263158 pixels
[Tue Sep  4 10:13:46 2012] 11881.750000 total counts/ 7640.100000 bgd. counts: snr = 48.527208
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.263158 pixels
  Position = (317.3, 302.6) = 2 5 38.21 64 49 41.8
  Extent = 6.3 (6.1-6.5)", rotation angle = 0
  Source counts = 4241.6 +/- 109.0
  Background counts = 7640.1
  Rate = 0.2 +/- 0.004
[Tue Sep  4 10:13:46 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 10:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 10:13:46 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 10:13:46 2012] Source does appear to be extended
[Tue Sep  4 10:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 13:11:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 13:11:32 2012] Initial guess for spatial extent in simple fitting = 6.29"
[Tue Sep  4 13:11:32 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.056
[Tue Sep  4 13:11:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.29"
[Tue Sep  4 14:18:58 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep  4 14:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src1.csv
[Tue Sep  4 14:18:58 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep  4 14:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src1.csv
[Tue Sep  4 14:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 14:18:58 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep  4 14:18:58 2012] fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep  4 14:18:58 2012] Fit fullrun_mos2_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep  4 14:19:18 2012] Spatial fit model total counts = 11922.000000, observed total counts = 11806.000000
[Tue Sep  4 14:19:18 2012] Offset between fit and detection position for source 2 = 0.016344 pixels
[Tue Sep  4 14:19:18 2012] 11986.740000 total counts/ 7742.720000 bgd. counts: snr = 48.231486
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016344 pixels
  Position = (317.3, 302.6) = 2 5 38.22 64 49 41.7
  Extent = 6.3 (6.1-6.6)", rotation angle = 0
  Source counts = 4244.0 +/- 109.5
  Background counts = 7742.7
  Rate = 0.2 +/- 0.004
[Tue Sep  4 14:19:18 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 14:19:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 14:19:18 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 14:19:18 2012] Source does appear to be extended
[Tue Sep  4 14:19:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 14:53:17 2012] Counts = 4244.020000, rescaling region sizes by 2.000000
[Tue Sep  4 14:53:17 2012] XMMSAS src. selection expression = ellipse(27559.599600, 26274.796200, 750.967222, 750.967222, 0.000000, X, Y)
[Tue Sep  4 14:53:17 2012] Writing source region out to fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src2_src.reg
[Tue Sep  4 14:53:17 2012] Extracting stamp from image fullrun_mos2_xmm0102580601_pi300-10000_cl_sm2.00.img.gz, (274, 259) - (360, 346)
[Tue Sep  4 14:53:17 2012] XMMSAS bgd. selection expression = annulus(27559.599600, 26274.796200, 2503.224072, 5006.448144, X, Y) && !ellipse(27603.595612, 24630.573456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.049042, 25428.587646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28325.305600, 24461.120800, 806.120023, 806.120023, 0.000000, X, Y) && !ellipse(29054.568000, 25970.242000, 1274.288037, 1274.288037, 0.000000, X, Y) && !ellipse(26044.012000, 26692.371800, 1086.232031, 1086.232031, 0.000000, X, Y) && !ellipse(25098.046000, 27040.710000, 1086.232031, 1086.232031, 0.000000, X, Y) && !ellipse(25110.813400, 25727.892000, 751.128822, 751.128822, 0.000000, X, Y) && !ellipse(27915.848000, 27426.898000, 1251.208036, 1251.208036, 0.000000, X, Y) && !ellipse(22893.894000, 25907.245200, 1198.008034, 1198.008034, 0.000000, X, Y) && !ellipse(30331.423157, 26406.307495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.338928, 25272.992310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30166.980000, 24865.238000, 1274.288037, 1274.288037, 0.000000, X, Y) && !ellipse(28191.672000, 28779.916000, 2502.416072, 2502.416072, 0.000000, X, Y) && !ellipse(23374.213593, 25883.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25093.358000, 25642.328000, 622.625618, 622.625618, 0.000000, X, Y) && !ellipse(29544.029083, 25268.738953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31184.000000, 26606.564000, 1200.784035, 1200.784035, 0.000000, X, Y) && !ellipse(23905.469025, 26414.540741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23376.346400, 26974.268000, 1133.160033, 1133.160033, 0.000000, X, Y) && !ellipse(29156.840851, 24415.202789, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 14:53:17 2012] Writing fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src2.gif
[Tue Sep  4 14:53:22 2012] Mean detx,y = (340.11, -172.04) 
[Tue Sep  4 14:53:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 14:53:34 2012] grppha failed
[Tue Sep  4 14:53:34 2012] Setting source spectrum file to fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Sep  4 14:53:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Sep  4 15:00:44 2012] Updating aperture counts using extracted products
[Tue Sep  4 15:00:44 2012] Error reading totcts from fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Sep  4 15:00:45 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 15:00:47 2012] Source 2 has no response, skipping
[Tue Sep  4 15:00:48 2012] xmm0102580601/analysis//spectral/fullrun_mos2_xmm0102580601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete