[Tue Sep 4 06:35:23 2012] Detection parameters: Position = (317.6, 302.8) = 2 5 38.03 64 49 42.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 8711.0 +/- 113.1 Background counts = 94.7 Rate = 0.3 +/- 0.004 [Tue Sep 4 06:35:24 2012] Off-axis axis estimate = 1.43' [Tue Sep 4 07:51:51 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting [Tue Sep 4 07:51:51 2012] Initial guess for spatial extent in simple fitting = 7.14" [Tue Sep 4 07:51:51 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.090 [Tue Sep 4 07:51:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.14" [Tue Sep 4 09:02:47 2012] fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_src1.ximg exists [Tue Sep 4 09:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_src1.csv [Tue Sep 4 09:02:47 2012] fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_src1_1.ximg exists [Tue Sep 4 09:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_src1.csv [Tue Sep 4 09:02:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 09:02:47 2012] fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Tue Sep 4 09:02:47 2012] fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Tue Sep 4 09:02:47 2012] Fit fullrun_mos1_xmm0102580601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Tue Sep 4 10:13:42 2012] Source 1 is offset by 6.172426 and -7.742708 pixels which is larger than 2 X fitted extent = 0.820851 x 0.820851, not incorporating fit results [Tue Sep 4 10:13:42 2012] Source 1 is offset by -1.503689 and 6.933407 pixels which is larger than 2 X fitted extent = 6.890713 x 6.890713, not incorporating fit results [Tue Sep 4 10:13:42 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 10:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 10:13:42 2012] Assessing source extent using major [Tue Sep 4 10:13:42 2012] Source does appear to be extended [Tue Sep 4 10:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 11:38:11 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting [Tue Sep 4 11:38:11 2012] Initial guess for spatial extent in simple fitting = 7.14" [Tue Sep 4 11:38:11 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.090 [Tue Sep 4 11:38:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.14" [Tue Sep 4 13:11:31 2012] fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_src1.ximg exists [Tue Sep 4 13:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_src1.csv [Tue Sep 4 13:11:31 2012] fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_src1_1.ximg exists [Tue Sep 4 13:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_src1.csv [Tue Sep 4 13:11:31 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 13:11:31 2012] fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Tue Sep 4 13:11:31 2012] fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Tue Sep 4 13:11:31 2012] Fit fullrun_mos1_xmm0102580601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Tue Sep 4 14:19:13 2012] Source 1 is offset by 6.172426 and -7.742708 pixels which is larger than 2 X fitted extent = 0.820851 x 0.820851, not incorporating fit results [Tue Sep 4 14:19:13 2012] Spatial fit model total counts = 7436.540000, observed total counts = 7401.000000 [Tue Sep 4 14:19:13 2012] Offset between fit and detection position for source 1 = 1.781403 pixels [Tue Sep 4 14:19:13 2012] Warning, changing simple spatial fit ID from 1 to 6 [Tue Sep 4 14:19:13 2012] 6320.024000 total counts/ 5955.550000 bgd. counts: snr = 4.722866 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.781403 pixels Position = (316.8, 304.4) = 2 5 38.55 64 49 49.8 Extent = 6.9 (5.1-9.8)", rotation angle = 0 Source counts = 364.5 +/- 79.5 Background counts = 5955.6 Rate = 0.01 +/- 0.003 [Tue Sep 4 14:19:13 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 14:19:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 14:19:13 2012] Assessing source extent using major axis lower bound [Tue Sep 4 14:19:13 2012] Source does appear to be extended [Tue Sep 4 14:19:13 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 14:45:00 2012] XMMSAS src. selection expression = ellipse(27516.152000, 26436.930000, 411.851412, 411.851412, 0.000000, X, Y) [Tue Sep 4 14:45:00 2012] Writing source region out to fullrun_mos1_xmm0102580601_pi300-10000_pass1_cl_src1_src.reg [Tue Sep 4 14:45:00 2012] Extracting stamp from image fullrun_mos1_xmm0102580601_pi300-10000_cl_sm2.00.img.gz, (293, 281) - (341, 328) [Tue Sep 4 14:45:00 2012] XMMSAS bgd. selection expression = annulus(27516.152000, 26436.930000, 686.419020, 1372.838040, X, Y) && !ellipse(28304.831329, 25007.194672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29391.165771, 26485.891998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28601.482000, 24495.010000, 1198.984035, 1198.984035, 0.000000, X, Y) && !ellipse(26777.730164, 24484.175140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.788000, 27422.964000, 1259.072036, 1259.072036, 0.000000, X, Y) && !ellipse(27921.914200, 23956.528600, 2210.824064, 435.176013, 90.000000, X, Y) && !ellipse(29868.040000, 27685.333200, 1481.584043, 1481.584043, 0.000000, X, Y) && !ellipse(29797.970000, 26444.624000, 1024.752029, 1024.752029, 0.000000, X, Y) && !ellipse(27808.831000, 28643.662000, 1265.672036, 274.643208, 313.571000, X, Y) && !ellipse(25298.946400, 26668.926000, 2243.584065, 2243.584065, 0.000000, X, Y) && !ellipse(29405.232117, 25441.047699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30907.698000, 26289.018600, 2470.800071, 2470.800071, 0.000000, X, Y) && !ellipse(25549.986206, 24585.299896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29242.484000, 24863.576200, 1299.408037, 1299.408037, 0.000000, X, Y) [Tue Sep 4 14:45:00 2012] Writing fullrun_mos1_xmm0102580601_pi300-10000_pass1_cl_src1.gif [Tue Sep 4 14:45:03 2012] Mean detx,y = (82.41, -579.57) [Tue Sep 4 14:45:04 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 14:45:12 2012] grppha failed [Tue Sep 4 14:45:12 2012] Setting source spectrum file to fullrun_mos1_xmm0102580601_pi300-10000_pass1_cl_src1_src.pi.gz [Tue Sep 4 14:45:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102580601_pi300-10000_pass1_cl_src1_bgd.pi.gz [Tue Sep 4 15:00:44 2012] Updating aperture counts using extracted products [Tue Sep 4 15:00:44 2012] Error reading totcts from fullrun_mos1_xmm0102580601_pi300-10000_pass1_cl_src1_src.pi.gz [Tue Sep 4 15:00:44 2012] No arf file for this source, not re-computing flux [Tue Sep 4 15:00:46 2012] Flag b found in src. 1 procflags, skipping spectral fitting [Tue Sep 4 15:00:46 2012] Source 1 has no response, skipping [Tue Sep 4 15:00:47 2012] xmm0102580601/analysis//spectral/fullrun_mos1_xmm0102580601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete