[Sat Jul 28 00:33:07 2012] Detection parameters:
  Position = (297.0, 341.0) = 0 58 30.92 -36 2 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.8 +/- 16.5
  Background counts = 20.4
  Rate = 0.01 +/- 0.001

[Sat Jul 28 00:33:08 2012] Off-axis axis estimate = 3.09'
[Sat Jul 28 00:34:37 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 00:34:37 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sat Jul 28 00:34:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.735
[Sat Jul 28 00:34:37 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.97"
[Sat Jul 28 02:53:07 2012] fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jul 28 02:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_src27.csv
[Sat Jul 28 02:53:07 2012] fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jul 28 02:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_src27.csv
[Sat Jul 28 02:53:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 02:53:08 2012] fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jul 28 02:53:08 2012] fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jul 28 02:53:08 2012] Fit fullrun_pn_xmm0102040701_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jul 28 03:10:09 2012] Spatial fit model total counts = 406.486000, observed total counts = 410.000000
[Sat Jul 28 03:10:09 2012] Offset between fit and detection position for source 28 = 4.458247 pixels
[Sat Jul 28 03:10:09 2012] 384.716000 total counts/ 141.469000 bgd. counts: snr = 20.451108
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 4.458247 pixels
  Position = (298.5, 345.2) = 0 58 30.37 -36 1 47.4
  Extent = 15.9 (15.9-15.9)", rotation angle = 0
  Source counts = 243.2 +/- 19.6
  Background counts = 141.5
  Rate = 0.02 +/- 0.001
[Sat Jul 28 03:10:09 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:10:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:10:09 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 03:10:09 2012] Source does appear to be extended
[Sat Jul 28 03:10:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:10:09 2012] Source is confused with source 24
[Sat Jul 28 03:10:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 03:10:18 2012] Initial guess for spatial extent in simple fitting = 15.93"
[Sat Jul 28 03:10:18 2012] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.039
[Sat Jul 28 03:10:18 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 15.93"
[Sat Jul 28 04:57:17 2012] fullrun_pn_xmm0102040701_pi300-10000_cl_pass1_src26.ximg exists
[Sat Jul 28 04:57:17 2012] fullrun_pn_xmm0102040701_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Jul 28 04:57:17 2012] Fit fullrun_pn_xmm0102040701_pi300-10000_cl_pass1_src26 appears to have run properly
[Sat Jul 28 04:57:18 2012] fullrun_pn_xmm0102040701_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Jul 28 04:57:18 2012] fullrun_pn_xmm0102040701_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Jul 28 04:57:18 2012] Fit fullrun_pn_xmm0102040701_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Jul 28 05:00:11 2012] Spatial fit model total counts = 634.859000, observed total counts = 636.000000
[Sat Jul 28 05:00:11 2012] Offset between fit and detection position for source 28 = 0.197894 pixels
[Sat Jul 28 05:00:11 2012] 624.696000 total counts/ 306.857000 bgd. counts: snr = 18.144256
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.197894 pixels
  Position = (298.3, 345.1) = 0 58 30.44 -36 1 47.7
  Extent = 31.9 (30.6-63.7)" x 5.1 (4.3-6.0)", rotation angle = 109 (107-111) degrees
  Source counts = 317.8 +/- 25.0
  Background counts = 306.9
  Rate = 0.02 +/- 0.002
[Sat Jul 28 05:00:11 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 05:00:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 05:00:11 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 05:00:11 2012] Source does appear to be extended
[Sat Jul 28 05:00:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.09
[Sat Jul 28 05:00:11 2012] Source is asymmetric
[Sat Jul 28 05:00:20 2012] XMMSAS src. selection expression = ellipse(25903.546400, 29975.313000, 1911.972055, 306.031209, 109.094000, X, Y)
[Sat Jul 28 05:00:20 2012] Writing source region out to fullrun_pn_xmm0102040701_pi300-10000_pass1_cl_src28_src.reg
[Sat Jul 28 05:00:20 2012] Extracting stamp from image fullrun_pn_xmm0102040701_pi300-10000_cl_sm2.00.img.gz, (188, 235) - (408, 455)
[Sat Jul 28 05:00:20 2012] XMMSAS bgd. selection expression = annulus(25903.546400, 29975.313000, 3186.620092, 6373.240183, X, Y) && !ellipse(24236.668140, 24828.759200, 1431.616841, 1431.616841, 0.000000, X, Y) && !ellipse(20449.124008, 24505.773804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28029.318000, 33872.920400, 429.450412, 429.450412, 0.000000, X, Y) && !ellipse(22179.997345, 34397.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28437.919200, 37829.178400, 1844.200053, 443.956813, 289.728000, X, Y) && !ellipse(27977.056000, 36414.114000, 1057.032030, 1057.032030, 0.000000, X, Y) && !ellipse(27786.265400, 35939.062000, 1674.824048, 1674.824048, 0.000000, X, Y) && !ellipse(27538.386283, 35005.186734, 1982.536057, 414.022903, 108.445994, X, Y) && !ellipse(27508.178959, 34907.864540, 1571.584045, 410.948506, 108.603598, X, Y) && !ellipse(27180.166080, 33885.468200, 1571.584045, 443.935213, 108.823100, X, Y) && !ellipse(26950.849600, 33220.730200, 1511.520043, 461.088013, 110.833000, X, Y) && !ellipse(26867.320000, 33069.192000, 403.447212, 403.447212, 0.000000, X, Y) && !ellipse(26692.478000, 32405.406000, 1354.168039, 1354.168039, 0.000000, X, Y) && !ellipse(26491.023460, 31866.073260, 1422.240041, 354.405610, 106.547700, X, Y) && !ellipse(26155.743049, 30726.805838, 1322.104038, 449.314043, 97.134386, X, Y) && !ellipse(25992.208000, 30458.266000, 1341.928039, 1341.928039, 0.000000, X, Y) && !ellipse(31456.868220, 29781.653000, 578.872017, 578.872017, 0.000000, X, Y) && !ellipse(25626.238647, 29191.064178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25350.130700, 28272.799400, 737.613621, 737.613621, 0.000000, X, Y) && !ellipse(23608.442480, 27909.986200, 457.471213, 457.471213, 0.000000, X, Y) && !ellipse(20677.881332, 27840.347229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.930000, 28576.058000, 1019.304029, 1019.304029, 0.000000, X, Y) && !ellipse(24683.761200, 26446.734000, 1121.792032, 1121.792032, 0.000000, X, Y) && !ellipse(30206.998800, 26625.846000, 470.849614, 470.849614, 0.000000, X, Y) && !ellipse(22805.389496, 25615.807037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20732.755478, 25357.039917, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 05:00:20 2012] Writing fullrun_pn_xmm0102040701_pi300-10000_pass1_cl_src28.gif
[Sat Jul 28 05:26:03 2012] Mean detx,y = (239.68, 5353.92) 
[Sat Jul 28 05:26:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 05:27:49 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 05:27:50 2012] Setting source spectrum file to fullrun_pn_xmm0102040701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jul 28 05:27:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0102040701_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jul 28 06:58:02 2012] Updating aperture counts using extracted products
[Sat Jul 28 06:58:02 2012] Error reading totcts from fullrun_pn_xmm0102040701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jul 28 06:58:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 06:58:03 2012] Using photon index=1.80, rate=0.0208, arf fullrun_pn_xmm0102040701_pi300-10000_pass1_cl_src28.arf
[Sat Jul 28 06:58:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 06:58:03 2012] Updating source flux to 6.4e-14
[Sat Jul 28 06:58:23 2012] Flag c found in src. 28 procflags, skipping spectral fitting