[Sun Jun  3 01:57:45 2012] Detection parameters:
  Position = (296.4, 274.9) = 11 31 9.55 31 14 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10849.7 +/- 123.2
  Background counts = 9.0
  Rate = 0.5 +/- 0.005

[Sun Jun  3 01:57:45 2012] Off-axis axis estimate = 1.71'
[Sun Jun  3 03:09:09 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 03:09:09 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun  3 03:09:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sun Jun  3 03:09:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Jun  3 03:36:27 2012] fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 03:36:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 03:36:27 2012] fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 03:36:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 03:36:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 03:36:27 2012] fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 03:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  3 03:36:27 2012] fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 03:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  3 03:36:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 03:36:41 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Sun Jun  3 03:36:41 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.377730 pixels away
[Sun Jun  3 03:36:41 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 03:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 03:36:41 2012] Assessing source extent using major
[Sun Jun  3 03:36:41 2012] Source does appear to be extended
[Sun Jun  3 03:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 04:47:21 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 04:47:21 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun  3 04:47:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sun Jun  3 04:47:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sun Jun  3 05:12:08 2012] fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 05:12:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 05:12:08 2012] fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 05:12:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_src1.csv
[Sun Jun  3 05:12:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 05:12:08 2012] fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 05:12:08 2012] fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 05:12:08 2012] Fit fullrun_mos2_xmm0102040201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  3 05:12:18 2012] Spatial fit model total counts = 9791.800000, observed total counts = 9608.000000
[Sun Jun  3 05:12:18 2012] Offset between fit and detection position for source 3 = 0.017918 pixels
[Sun Jun  3 05:12:18 2012] 9795.340000 total counts/ 2177.690000 bgd. counts: snr = 163.238647
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.017918 pixels
  Position = (296.4, 274.9) = 11 31 9.55 31 14 5.7
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 7617.6 +/- 99.0
  Background counts = 2177.7
  Rate = 0.3 +/- 0.004
[Sun Jun  3 05:12:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 05:12:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 05:12:18 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 05:12:18 2012] Source does appear to be extended
[Sun Jun  3 05:12:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 06:32:59 2012] Counts = 7617.650000, rescaling region sizes by 2.000000
[Sun Jun  3 06:32:59 2012] XMMSAS src. selection expression = ellipse(25740.947600, 23870.599800, 647.132419, 647.132419, 0.000000, X, Y)
[Sun Jun  3 06:32:59 2012] Writing source region out to fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  3 06:32:59 2012] Extracting stamp from image fullrun_mos2_xmm0102040201_pi300-10000_cl_sm2.00.img.gz, (259, 238) - (334, 312)
[Sun Jun  3 06:32:59 2012] XMMSAS bgd. selection expression = annulus(25740.947600, 23870.599800, 2157.108062, 4314.216124, X, Y) && !ellipse(24008.773560, 26460.868347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29323.936600, 23106.880320, 870.180225, 870.180225, 0.000000, X, Y) && !ellipse(24905.196411, 23609.897888, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 06:32:59 2012] Writing fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3.gif
[Sun Jun  3 06:33:02 2012] Mean detx,y = (-40.98, 9.77) 
[Sun Jun  3 06:33:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 06:34:02 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 06:34:02 2012] Setting source spectrum file to fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 06:34:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  3 06:45:46 2012] Updating aperture counts using extracted products
[Sun Jun  3 06:45:46 2012] Error reading totcts from fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 06:45:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 06:45:46 2012] Using photon index=1.80, rate=0.324, arf fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 06:45:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 06:45:46 2012] Updating source flux to 4.3e-12
[Sun Jun  3 06:46:18 2012] Reading fit data from xmm0102040201/analysis//spectral/fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jun  3 06:46:18 2012] Spectral fit parameter nH value = 494310000000.0
[Sun Jun  3 06:46:18 2012] Spectral fit parameter PhoIndex value = 1.9426
[Sun Jun  3 06:46:18 2012] Failed to get F(0.3-8.0) from xmm0102040201/analysis//spectral/fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jun  3 06:46:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 06:46:18 2012] Using Nh = 4.9e+11, photon index=1.94, rate=0.324, arf fullrun_mos2_xmm0102040201_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 06:46:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 06:46:18 2012] Updating source flux to 4.1e-12