[Sun Jun  3 01:57:24 2012] Detection parameters:
  Position = (296.4, 274.9) = 11 31 9.55 31 14 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12926.5 +/- 135.6
  Background counts = 23.0
  Rate = 0.6 +/- 0.006

[Sun Jun  3 01:57:24 2012] Off-axis axis estimate = 1.71'
[Sun Jun  3 02:53:17 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 02:53:17 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun  3 02:53:17 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sun Jun  3 02:53:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Jun  3 03:09:09 2012] fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 03:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 03:09:09 2012] fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 03:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 03:09:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 03:09:09 2012] fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 03:09:09 2012] fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 03:09:09 2012] Fit fullrun_mos1_xmm0102040201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  3 03:36:38 2012] Spatial fit model total counts = 11059.300000, observed total counts = 11064.000000
[Sun Jun  3 03:36:38 2012] Offset between fit and detection position for source 3 = 0.050226 pixels
[Sun Jun  3 03:36:38 2012] 11085.800000 total counts/ 2538.850000 bgd. counts: snr = 169.626086
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.050226 pixels
  Position = (296.4, 274.9) = 11 31 9.55 31 14 5.4
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 8547.0 +/- 105.3
  Background counts = 2538.8
  Rate = 0.4 +/- 0.005
[Sun Jun  3 03:36:38 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 03:36:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 03:36:38 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 03:36:38 2012] Source does appear to be extended
[Sun Jun  3 03:36:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 04:33:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 04:33:22 2012] Initial guess for spatial extent in simple fitting = 5.43"
[Sun Jun  3 04:33:22 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.982
[Sun Jun  3 04:33:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Sun Jun  3 04:47:21 2012] fullrun_mos1_xmm0102040201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 04:47:21 2012] fullrun_mos1_xmm0102040201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 04:47:21 2012] Fit fullrun_mos1_xmm0102040201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jun  3 04:47:21 2012] fullrun_mos1_xmm0102040201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 04:47:21 2012] fullrun_mos1_xmm0102040201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 04:47:21 2012] Fit fullrun_mos1_xmm0102040201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  3 05:12:15 2012] Spatial fit model total counts = 11067.100000, observed total counts = 11074.000000
[Sun Jun  3 05:12:15 2012] Offset between fit and detection position for source 3 = 0.012649 pixels
[Sun Jun  3 05:12:15 2012] 11142.540000 total counts/ 2600.480000 bgd. counts: snr = 167.508118
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012649 pixels
  Position = (296.4, 274.9) = 11 31 9.55 31 14 5.3
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 8542.1 +/- 105.6
  Background counts = 2600.5
  Rate = 0.4 +/- 0.005
[Sun Jun  3 05:12:15 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 05:12:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 05:12:15 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 05:12:15 2012] Source does appear to be extended
[Sun Jun  3 05:12:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 06:16:58 2012] Counts = 8542.060000, rescaling region sizes by 2.000000
[Sun Jun  3 06:16:58 2012] XMMSAS src. selection expression = ellipse(25741.786000, 23863.660860, 650.637619, 650.637619, 0.000000, X, Y)
[Sun Jun  3 06:16:58 2012] Writing source region out to fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  3 06:16:58 2012] Extracting stamp from image fullrun_mos1_xmm0102040201_pi300-10000_cl_sm2.00.img.gz, (259, 237) - (334, 312)
[Sun Jun  3 06:16:58 2012] XMMSAS bgd. selection expression = annulus(25741.786000, 23863.660860, 2168.792062, 4337.584125, X, Y) && !ellipse(24020.146200, 26544.591800, 450.676013, 450.676013, 0.000000, X, Y) && !ellipse(29377.874695, 23254.328400, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 06:16:58 2012] Writing fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3.gif
[Sun Jun  3 06:17:01 2012] Mean detx,y = (231.48, -120.83) 
[Sun Jun  3 06:17:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 06:17:42 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 06:17:42 2012] Setting source spectrum file to fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 06:17:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  3 06:45:46 2012] Updating aperture counts using extracted products
[Sun Jun  3 06:45:46 2012] Error reading totcts from fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  3 06:45:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 06:45:46 2012] Using photon index=1.80, rate=0.379, arf fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 06:45:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 06:45:46 2012] Updating source flux to 3.6e-12
[Sun Jun  3 06:46:08 2012] Reading fit data from xmm0102040201/analysis//spectral/fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jun  3 06:46:08 2012] Spectral fit parameter nH value = 1.16827e+12
[Sun Jun  3 06:46:08 2012] Spectral fit parameter PhoIndex value = 1.99807
[Sun Jun  3 06:46:08 2012] Failed to get F(0.3-8.0) from xmm0102040201/analysis//spectral/fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jun  3 06:46:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun  3 06:46:08 2012] Using Nh = 1.2e+12, photon index=2.00, rate=0.379, arf fullrun_mos1_xmm0102040201_pi300-10000_pass1_cl_src3.arf
[Sun Jun  3 06:46:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  3 06:46:08 2012] Updating source flux to 3.3e-12