[Tue Nov  8 04:57:32 2011] Detection parameters:
  Position = (325.5, 167.3) = 15 34 48.16 23 22 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.1 +/- 7.5
  Background counts = 4.6
  Rate = 0.004 +/- 0.0008

[Tue Nov  8 04:57:33 2011] Off-axis axis estimate = 9.71'
[Tue Nov  8 05:29:51 2011] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Tue Nov  8 05:29:51 2011] Initial guess for spatial extent in simple fitting = 11.28"
[Tue Nov  8 05:29:51 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.097
[Tue Nov  8 05:29:51 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 11.28"
[Tue Nov  8 05:49:21 2011] fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_src6.ximg exists
[Tue Nov  8 05:49:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_src6.csv
[Tue Nov  8 05:49:21 2011] fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Nov  8 05:49:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_src6.csv
[Tue Nov  8 05:49:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  8 05:49:21 2011] fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Nov  8 05:49:21 2011] fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Nov  8 05:49:21 2011] Fit fullrun_mos1_xmm0101640901_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Nov  8 06:00:32 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 14.558150 pixels away
[Tue Nov  8 06:00:32 2011] Vigneting correction estimate = 1.000000
[Tue Nov  8 06:00:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  8 06:00:32 2011] Assessing source extent using major
[Tue Nov  8 06:00:32 2011] Source does appear to be extended
[Tue Nov  8 06:00:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  8 06:29:06 2011] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Tue Nov  8 06:29:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  8 06:29:06 2011] Initial guess for spatial extent in simple fitting = 11.28"
[Tue Nov  8 06:29:06 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.097
[Tue Nov  8 06:29:06 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 11.28"
[Tue Nov  8 06:43:50 2011] fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_src5.ximg exists
[Tue Nov  8 06:43:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_src5.csv
[Tue Nov  8 06:43:51 2011] fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Nov  8 06:43:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_src5.csv
[Tue Nov  8 06:43:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  8 06:43:51 2011] fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Nov  8 06:43:51 2011] fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Nov  8 06:43:51 2011] Fit fullrun_mos1_xmm0101640901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Nov  8 06:50:44 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.425658 pixels away
[Tue Nov  8 06:50:44 2011] Vigneting correction estimate = 1.000000
[Tue Nov  8 06:50:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  8 06:50:44 2011] Assessing source extent using major
[Tue Nov  8 06:50:44 2011] Source does appear to be extended
[Tue Nov  8 06:50:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  8 07:05:37 2011] XMMSAS src. selection expression = ellipse(28270.945190, 14505.838272, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Nov  8 07:05:37 2011] Writing source region out to fullrun_mos1_xmm0101640901_pi300-10000_pass1_cl_src12_src.reg
[Tue Nov  8 07:05:37 2011] Extracting stamp from image fullrun_mos1_xmm0101640901_pi300-10000_cl_sm2.00.img.gz, (288, 130) - (363, 205)
[Tue Nov  8 07:05:37 2011] XMMSAS bgd. selection expression = annulus(28270.945190, 14505.838272, 1087.500000, 2175.000000, X, Y) && !ellipse(29419.591800, 15916.016200, 1014.808029, 626.813618, 90.000000, X, Y)
[Tue Nov  8 07:05:37 2011] Writing fullrun_mos1_xmm0101640901_pi300-10000_pass1_cl_src12.gif
[Tue Nov  8 07:06:17 2011] Mean detx,y = (9276.47, 2419.20) 
[Tue Nov  8 07:06:18 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  8 07:06:25 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  8 07:06:25 2011] Setting source spectrum file to fullrun_mos1_xmm0101640901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Nov  8 07:06:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0101640901_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Nov  8 07:08:11 2011] Not generating rmf since there are only 32 counts
[Tue Nov  8 07:08:11 2011] rmf not generated due to insufficient counts
[Tue Nov  8 07:14:03 2011] Updating aperture counts using extracted products
[Tue Nov  8 07:14:03 2011] Error reading totcts from fullrun_mos1_xmm0101640901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Nov  8 07:14:03 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  8 07:14:03 2011] Using photon index=1.80, rate=0.00359, arf fullrun_mos1_xmm0101640901_pi300-10000_pass1_cl_src12.arf
[Tue Nov  8 07:14:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  8 07:14:03 2011] Updating source flux to 5.7e-14
[Tue Nov  8 07:14:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Nov  8 07:14:06 2011] xmm0101640901/analysis//spectral/fullrun_mos1_xmm0101640901_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete