[Tue Nov  8 04:40:57 2011] Detection parameters:
  Position = (315.7, 293.9) = 15 34 53.60 23 28 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 10.7
  Background counts = 5.4
  Rate = 0.005 +/- 0.0008

[Tue Nov  8 04:40:57 2011] Off-axis axis estimate = 1.29'
[Tue Nov  8 05:26:08 2011] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Tue Nov  8 05:26:08 2011] Initial guess for spatial extent in simple fitting = 7.07"
[Tue Nov  8 05:26:08 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Tue Nov  8 05:26:08 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.07"
[Tue Nov  8 05:33:14 2011] fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_src3.ximg exists
[Tue Nov  8 05:33:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_src3.csv
[Tue Nov  8 05:33:14 2011] fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Nov  8 05:33:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_src3.csv
[Tue Nov  8 05:33:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  8 05:33:14 2011] fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Nov  8 05:33:14 2011] fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Nov  8 05:33:14 2011] Fit fullrun_mos2_xmm0101640801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Nov  8 05:33:22 2011] Source 6 is offset by 7.165603 and 5.387741 pixels which is larger than
2 X fitted extent = 0.813149 x 0.813149, not incorporating fit results
[Tue Nov  8 05:33:22 2011] Vigneting correction estimate = 1.000000
[Tue Nov  8 05:33:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  8 05:33:22 2011] Assessing source extent using major
[Tue Nov  8 05:33:22 2011] Source does appear to be extended
[Tue Nov  8 05:33:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  8 06:16:27 2011] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Tue Nov  8 06:16:27 2011] Initial guess for spatial extent in simple fitting = 7.07"
[Tue Nov  8 06:16:27 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Tue Nov  8 06:16:27 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.07"
[Tue Nov  8 06:24:24 2011] fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_src3.ximg exists
[Tue Nov  8 06:24:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_src3.csv
[Tue Nov  8 06:24:24 2011] fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Nov  8 06:24:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_src3.csv
[Tue Nov  8 06:24:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  8 06:24:24 2011] fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Nov  8 06:24:24 2011] fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Nov  8 06:24:24 2011] Fit fullrun_mos2_xmm0101640801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Nov  8 06:24:32 2011] Spatial fit model total counts = 182.141000, observed total counts = 183.000000
[Tue Nov  8 06:24:32 2011] Offset between fit and detection position for source 6 = 0.156392 pixels
[Tue Nov  8 06:24:32 2011] 181.279100 total counts/ 121.250000 bgd. counts: snr = 5.451562
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.156392 pixels
  Position = (315.6, 293.7) = 15 34 53.61 23 28 20.3
  Extent = 9.4 (7.1-14.1)", rotation angle = 0
  Source counts = 60.0 +/- 13.5
  Background counts = 121.2
  Rate = 0.004 +/- 0.001
[Tue Nov  8 06:24:32 2011] Vigneting correction estimate = 1.000000
[Tue Nov  8 06:24:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  8 06:24:32 2011] Assessing source extent using major axis lower bound
[Tue Nov  8 06:24:32 2011] Source does appear to be extended
[Tue Nov  8 06:24:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  8 06:51:29 2011] XMMSAS src. selection expression = ellipse(27412.644800, 25505.740800, 565.352416, 565.352416, 0.000000, X, Y)
[Tue Nov  8 06:51:29 2011] Writing source region out to fullrun_mos2_xmm0101640801_pi300-10000_pass1_cl_src6_src.reg
[Tue Nov  8 06:51:29 2011] Extracting stamp from image fullrun_mos2_xmm0101640801_pi300-10000_cl_sm2.00.img.gz, (283, 261) - (348, 326)
[Tue Nov  8 06:51:29 2011] XMMSAS bgd. selection expression = annulus(27412.644800, 25505.740800, 942.254027, 1884.508054, X, Y) && !ellipse(26389.215400, 27714.021400, 449.998875, 449.998875, 0.000000, X, Y) && !ellipse(28742.183120, 24342.031400, 560.664016, 107.685603, 10.055586, X, Y)
[Tue Nov  8 06:51:29 2011] Writing fullrun_mos2_xmm0101640801_pi300-10000_pass1_cl_src6.gif
[Tue Nov  8 06:51:56 2011] Mean detx,y = (-127.29, -2407.46) 
[Tue Nov  8 06:51:56 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  8 06:52:05 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  8 06:52:05 2011] Setting source spectrum file to fullrun_mos2_xmm0101640801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Nov  8 06:52:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0101640801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Nov  8 06:56:09 2011] Not generating rmf since there are only 60 counts
[Tue Nov  8 06:56:09 2011] rmf not generated due to insufficient counts
[Tue Nov  8 06:56:45 2011] Updating aperture counts using extracted products
[Tue Nov  8 06:56:45 2011] Error reading totcts from fullrun_mos2_xmm0101640801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Nov  8 06:56:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  8 06:56:46 2011] Using photon index=1.80, rate=0.00441, arf fullrun_mos2_xmm0101640801_pi300-10000_pass1_cl_src6.arf
[Tue Nov  8 06:56:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  8 06:56:46 2011] Updating source flux to 4.9e-14
[Tue Nov  8 06:56:57 2011] Flag b found in src. 6 procflags, skipping spectral fitting
[Tue Nov  8 06:56:57 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting