[Thu May 31 21:46:53 2012] Detection parameters:
  Position = (285.4, 277.2) = 16 52 58.92 2 24 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2523.3 +/- 61.4
  Background counts = 68.4
  Rate = 0.1 +/- 0.003

[Thu May 31 21:46:53 2012] Off-axis axis estimate = 1.81'
[Thu May 31 22:19:05 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu May 31 22:19:05 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Thu May 31 22:19:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Thu May 31 22:19:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Thu May 31 22:23:18 2012] fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 22:23:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_src1.csv
[Thu May 31 22:23:18 2012] fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 22:23:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_src1.csv
[Thu May 31 22:23:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:23:18 2012] fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 22:23:18 2012] fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 22:23:18 2012] Fit fullrun_mos2_xmm0101640601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 22:23:23 2012] Spatial fit model total counts = 1860.250000, observed total counts = 1779.000000
[Thu May 31 22:23:23 2012] Offset between fit and detection position for source 1 = 0.232078 pixels
[Thu May 31 22:23:23 2012] 1862.123000 total counts/ 592.813000 bgd. counts: snr = 52.132535
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.232078 pixels
  Position = (285.4, 277.4) = 16 52 58.90 2 24 3.8
  Extent = 7.0 (6.7-7.4)", rotation angle = 0
  Source counts = 1269.3 +/- 43.2
  Background counts = 592.8
  Rate = 0.1 +/- 0.004
[Thu May 31 22:23:23 2012] Vigneting correction estimate = 1.000000
[Thu May 31 22:23:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 22:23:23 2012] Assessing source extent using major axis lower bound
[Thu May 31 22:23:23 2012] Source does appear to be extended
[Thu May 31 22:23:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 22:53:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 22:53:39 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Thu May 31 22:53:39 2012] source mask rpix=1.6, npix_max = 17, mask sum = 25, frac = 1.394
[Thu May 31 22:53:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.04"
[Thu May 31 22:58:24 2012] fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 22:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_src1.csv
[Thu May 31 22:58:24 2012] fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 22:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_src1.csv
[Thu May 31 22:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:58:24 2012] fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 22:58:24 2012] fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 22:58:24 2012] Fit fullrun_mos2_xmm0101640601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 22:58:29 2012] Spatial fit model total counts = 1851.260000, observed total counts = 1779.000000
[Thu May 31 22:58:29 2012] Offset between fit and detection position for source 1 = 0.001081 pixels
[Thu May 31 22:58:29 2012] 1853.159000 total counts/ 587.889000 bgd. counts: snr = 52.183781
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001081 pixels
  Position = (285.4, 277.4) = 16 52 58.90 2 24 3.8
  Extent = 7.1 (6.7-7.4)", rotation angle = 0
  Source counts = 1265.3 +/- 43.0
  Background counts = 587.9
  Rate = 0.1 +/- 0.004
[Thu May 31 22:58:29 2012] Vigneting correction estimate = 1.000000
[Thu May 31 22:58:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 22:58:29 2012] Assessing source extent using major axis lower bound
[Thu May 31 22:58:29 2012] Source does appear to be extended
[Thu May 31 22:58:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 23:26:34 2012] Counts = 1265.270000, rescaling region sizes by 2.000000
[Thu May 31 23:26:34 2012] XMMSAS src. selection expression = ellipse(24784.080200, 24089.215600, 847.110024, 847.110024, 0.000000, X, Y)
[Thu May 31 23:26:34 2012] Writing source region out to fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1_src.reg
[Thu May 31 23:26:34 2012] Extracting stamp from image fullrun_mos2_xmm0101640601_pi300-10000_cl_sm2.00.img.gz, (237, 229) - (334, 326)
[Thu May 31 23:26:34 2012] XMMSAS bgd. selection expression = annulus(24784.080200, 24089.215600, 2823.700081, 5647.400163, X, Y)
[Thu May 31 23:26:34 2012] Writing fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1.gif
[Thu May 31 23:26:36 2012] Mean detx,y = (-16.07, 133.74) 
[Thu May 31 23:26:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 23:28:15 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 23:28:16 2012] Setting source spectrum file to fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 23:28:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 31 23:33:36 2012] Updating aperture counts using extracted products
[Thu May 31 23:33:36 2012] Error reading totcts from fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 23:33:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:33:36 2012] Using photon index=1.80, rate=0.119, arf fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1.arf
[Thu May 31 23:33:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:33:36 2012] Updating source flux to 1.3e-12
[Thu May 31 23:33:54 2012] Reading fit data from xmm0101640601/analysis//spectral/fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 31 23:33:54 2012] Spectral fit parameter nH value = 1.96016e+21
[Thu May 31 23:33:54 2012] Spectral fit parameter PhoIndex value = 1.99868
[Thu May 31 23:33:54 2012] Failed to get F(0.3-8.0) from xmm0101640601/analysis//spectral/fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 31 23:33:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:33:54 2012] Using Nh = 2e+21, photon index=2.00, rate=0.119, arf fullrun_mos2_xmm0101640601_pi300-10000_pass1_cl_src1.arf
[Thu May 31 23:33:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:33:54 2012] Updating source flux to 1.4e-12