[Fri Jun  1 10:16:27 2012] Detection parameters:
  Position = (248.1, 418.7) = 13 44 58.34 56 1 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.1 +/- 13.9
  Background counts = 16.4
  Rate = 0.009 +/- 0.001

[Fri Jun  1 10:16:27 2012] Off-axis axis estimate = 9.45'
[Fri Jun  1 10:18:29 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 10:18:29 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Fri Jun  1 10:18:29 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Fri Jun  1 10:18:29 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.15"
[Fri Jun  1 11:04:09 2012] fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun  1 11:04:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_src7.csv
[Fri Jun  1 11:04:09 2012] fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun  1 11:04:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_src7.csv
[Fri Jun  1 11:04:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 11:04:09 2012] fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun  1 11:04:09 2012] fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun  1 11:04:09 2012] Fit fullrun_pn_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun  1 12:30:26 2012] Spatial fit model total counts = 270.000000, observed total counts = 270.000000
[Fri Jun  1 12:30:26 2012] Offset between fit and detection position for source 8 = 0.266550 pixels
[Fri Jun  1 12:30:26 2012] 264.925400 total counts/ 195.957000 bgd. counts: snr = 4.926855
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.266550 pixels
  Position = (247.8, 418.6) = 13 44 58.47 56 1 1.9
  Extent = 4.6 (3.7-5.9)", rotation angle = 0
  Source counts = 69.0 +/- 16.3
  Background counts = 196.0
  Rate = 0.003 +/- 0.0008
[Fri Jun  1 12:30:26 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:30:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:30:26 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 12:30:26 2012] Source does appear to be extended
[Fri Jun  1 12:30:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 12:30:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 12:30:42 2012] Initial guess for spatial extent in simple fitting = 4.65"
[Fri Jun  1 12:30:42 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.914
[Fri Jun  1 12:30:42 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.65"
[Fri Jun  1 13:16:52 2012] fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun  1 13:16:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_src7.csv
[Fri Jun  1 13:16:52 2012] fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun  1 13:16:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_src7.csv
[Fri Jun  1 13:16:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 13:16:52 2012] fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun  1 13:16:52 2012] fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun  1 13:16:52 2012] Fit fullrun_pn_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun  1 14:44:16 2012] Spatial fit model total counts = 269.099000, observed total counts = 270.000000
[Fri Jun  1 14:44:16 2012] Offset between fit and detection position for source 8 = 0.028923 pixels
[Fri Jun  1 14:44:16 2012] 264.001200 total counts/ 195.808000 bgd. counts: snr = 4.873330
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.028923 pixels
  Position = (247.9, 418.6) = 13 44 58.45 56 1 1.9
  Extent = 4.7 (3.7-5.9)", rotation angle = 0
  Source counts = 68.2 +/- 16.2
  Background counts = 195.8
  Rate = 0.003 +/- 0.0008
[Fri Jun  1 14:44:16 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:44:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:44:16 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:44:16 2012] Source does appear to be extended
[Fri Jun  1 14:44:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 14:44:41 2012] XMMSAS src. selection expression = ellipse(21514.871140, 36366.666800, 279.464408, 279.464408, 0.000000, X, Y)
[Fri Jun  1 14:44:41 2012] Writing source region out to fullrun_pn_xmm0101640401_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun  1 14:44:41 2012] Extracting stamp from image fullrun_pn_xmm0101640401_pi300-10000_cl_sm2.00.img.gz, (232, 403) - (264, 435)
[Fri Jun  1 14:44:41 2012] XMMSAS bgd. selection expression = annulus(21514.871140, 36366.666800, 465.774013, 931.548027, X, Y)
[Fri Jun  1 14:44:41 2012] Writing fullrun_pn_xmm0101640401_pi300-10000_pass1_cl_src8.gif
[Fri Jun  1 14:50:55 2012] Mean detx,y = (9456.51, -2775.36) 
[Fri Jun  1 14:50:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 14:51:19 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 14:51:20 2012] Setting source spectrum file to fullrun_pn_xmm0101640401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  1 14:51:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101640401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun  1 15:13:15 2012] Not generating rmf since there are only 68 counts
[Fri Jun  1 15:13:15 2012] rmf not generated due to insufficient counts
[Fri Jun  1 16:04:47 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:04:47 2012] Error reading totcts from fullrun_pn_xmm0101640401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  1 16:04:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:04:48 2012] Using photon index=1.80, rate=0.00341, arf fullrun_pn_xmm0101640401_pi300-10000_pass1_cl_src8.arf
[Fri Jun  1 16:04:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:04:48 2012] Updating source flux to 2.4e-14
[Fri Jun  1 16:05:31 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting