[Fri Jun  1 10:17:14 2012] Detection parameters:
  Position = (268.4, 223.9) = 13 44 47.72 55 46 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.3 +/- 15.5
  Background counts = 4.6
  Rate = 0.01 +/- 0.001

[Fri Jun  1 10:17:14 2012] Off-axis axis estimate = 5.83'
[Fri Jun  1 11:55:21 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:55:21 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Fri Jun  1 11:55:21 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.070
[Fri Jun  1 11:55:21 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.34"
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  1 12:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src3.csv
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  1 12:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src3.csv
[Fri Jun  1 12:30:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  1 12:30:19 2012] Fit fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun  1 12:30:33 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.700243 pixels away
[Fri Jun  1 12:30:33 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:30:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:30:33 2012] Assessing source extent using major
[Fri Jun  1 12:30:33 2012] Source does appear to be extended
[Fri Jun  1 12:30:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 14:00:58 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 14:00:58 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Fri Jun  1 14:00:58 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.070
[Fri Jun  1 14:00:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.34"
[Fri Jun  1 14:44:03 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  1 14:44:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 14:44:03 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  1 14:44:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 14:44:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  1 14:44:04 2012] Fit fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun  1 14:44:28 2012] Spatial fit model total counts = 195.000000, observed total counts = 195.000000
[Fri Jun  1 14:44:28 2012] Offset between fit and detection position for source 2 = 0.298641 pixels
[Fri Jun  1 14:44:28 2012] 197.014000 total counts/ 94.394000 bgd. counts: snr = 10.562332
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.298641 pixels
  Position = (268.6, 223.8) = 13 44 47.57 55 46 55.0
  Extent = 6.0 (4.6-7.2)", rotation angle = 0
  Source counts = 102.6 +/- 14.0
  Background counts = 94.4
  Rate = 0.005 +/- 0.0006
[Fri Jun  1 14:44:28 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:44:28 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:44:28 2012] Source does appear to be extended
[Fri Jun  1 14:44:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:49:43 2012] XMMSAS src. selection expression = ellipse(23323.953200, 19426.354200, 358.330810, 358.330810, 0.000000, X, Y)
[Fri Jun  1 15:49:43 2012] Writing source region out to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 15:49:43 2012] Extracting stamp from image fullrun_mos2_xmm0101640401_pi300-10000_cl_sm2.00.img.gz, (248, 203) - (289, 244)
[Fri Jun  1 15:49:43 2012] XMMSAS bgd. selection expression = annulus(23323.953200, 19426.354200, 597.218017, 1194.436034, X, Y)
[Fri Jun  1 15:49:43 2012] Writing fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 15:50:08 2012] Mean detx,y = (7665.78, 999.12) 
[Fri Jun  1 15:50:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:50:23 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:50:23 2012] Setting source spectrum file to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 15:50:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  1 16:04:49 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:04:49 2012] Error reading totcts from fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 16:04:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:04:49 2012] Using photon index=1.80, rate=0.00461, arf fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 16:04:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:04:49 2012] Updating source flux to 1.2e-13