[Fri Jun  1 10:17:14 2012] Detection parameters:
  Position = (225.8, 338.2) = 13 45 9.80 55 55 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.0 +/- 8.0
  Background counts = 5.9
  Rate = 0.002 +/- 0.0005

[Fri Jun  1 10:17:14 2012] Off-axis axis estimate = 6.01'
[Fri Jun  1 11:55:21 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:55:21 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Fri Jun  1 11:55:21 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.878
[Fri Jun  1 11:55:21 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.43"
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src17.ximg exists
[Fri Jun  1 12:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src17.csv
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Jun  1 12:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src17.csv
[Fri Jun  1 12:30:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jun  1 12:30:19 2012] Fit fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Jun  1 12:30:33 2012] Spatial fit model total counts = 94.993200, observed total counts = 95.000000
[Fri Jun  1 12:30:33 2012] Offset between fit and detection position for source 18 = 1.171776 pixels
[Fri Jun  1 12:30:33 2012] 94.805400 total counts/ 58.634800 bgd. counts: snr = 4.723653
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.171776 pixels
  Position = (225.9, 339.4) = 13 45 9.73 55 55 17.4
  Extent = 8.3 (5.8-13.3)", rotation angle = 0
  Source counts = 36.2 +/- 9.7
  Background counts = 58.6
  Rate = 0.002 +/- 0.0004
[Fri Jun  1 12:30:33 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:30:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:30:33 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 12:30:33 2012] Source does appear to be extended
[Fri Jun  1 12:30:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 14:00:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 14:00:58 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Fri Jun  1 14:00:58 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861
[Fri Jun  1 14:00:58 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.31"
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun  1 14:44:04 2012] Fit fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun  1 14:44:04 2012] Fit fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jun  1 14:44:28 2012] Spatial fit model total counts = 100.381000, observed total counts = 98.000000
[Fri Jun  1 14:44:28 2012] Offset between fit and detection position for source 18 = 0.564643 pixels
[Fri Jun  1 14:44:28 2012] 100.832600 total counts/ 70.699200 bgd. counts: snr = 3.583776
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.564643 pixels
  Position = (225.4, 339.1) = 13 45 9.99 55 55 16.1
  Extent = 9.7" x 2.7", rotation angle = 82
  Source counts = 30.1 +/- 10.0
  Background counts = 70.7
  Rate = 0.001 +/- 0.0005
[Fri Jun  1 14:44:28 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:44:28 2012] Assessing source extent using major
[Fri Jun  1 14:44:28 2012] Source does appear to be extended
[Fri Jun  1 14:44:28 2012] Computing asymmetry using major and minor axis, asym = 3.65
[Fri Jun  1 14:44:28 2012] Source is asymmetric
[Fri Jun  1 15:49:43 2012] XMMSAS src. selection expression = ellipse(19565.380690, 29455.422182, 583.674017, 160.064052, 81.581315, X, Y)
[Fri Jun  1 15:49:43 2012] Writing source region out to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src18_src.reg
[Fri Jun  1 15:49:43 2012] Extracting stamp from image fullrun_mos2_xmm0101640401_pi300-10000_cl_sm2.00.img.gz, (192, 306) - (259, 373)
[Fri Jun  1 15:49:43 2012] XMMSAS bgd. selection expression = annulus(19565.380690, 29455.422182, 972.790028, 1945.580056, X, Y)
[Fri Jun  1 15:49:43 2012] Writing fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src18.gif
[Fri Jun  1 15:53:00 2012] Mean detx,y = (-2413.00, 4705.32) 
[Fri Jun  1 15:53:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:53:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:53:16 2012] Setting source spectrum file to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jun  1 15:53:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Jun  1 16:03:31 2012] Not generating rmf since there are only 30 counts
[Fri Jun  1 16:03:31 2012] rmf not generated due to insufficient counts
[Fri Jun  1 16:04:49 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:04:49 2012] Error reading totcts from fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jun  1 16:04:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:04:49 2012] Using photon index=1.80, rate=0.00135, arf fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src18.arf
[Fri Jun  1 16:04:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:04:49 2012] Updating source flux to 3.2e-14
[Fri Jun  1 16:05:17 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting