[Fri Jun  1 10:17:14 2012] Detection parameters:
  Position = (247.6, 418.5) = 13 44 58.57 56 1 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.6 +/- 7.2
  Background counts = 4.6
  Rate = 0.002 +/- 0.0006

[Fri Jun  1 10:17:14 2012] Off-axis axis estimate = 9.45'
[Fri Jun  1 11:55:21 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:55:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 11:55:21 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Fri Jun  1 11:55:21 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.118
[Fri Jun  1 11:55:21 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.15"
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun  1 12:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src9.csv
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun  1 12:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src9.csv
[Fri Jun  1 12:30:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun  1 12:30:19 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun  1 12:30:19 2012] Fit fullrun_mos2_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jun  1 12:30:33 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.084488 pixels away
[Fri Jun  1 12:30:33 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:30:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:30:33 2012] Assessing source extent using major
[Fri Jun  1 12:30:33 2012] Source does appear to be extended
[Fri Jun  1 12:30:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 14:00:58 2012] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 14:00:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 14:00:58 2012] Initial guess for spatial extent in simple fitting = 11.15"
[Fri Jun  1 14:00:58 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.118
[Fri Jun  1 14:00:58 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.15"
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun  1 14:44:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src9.csv
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun  1 14:44:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src9.csv
[Fri Jun  1 14:44:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun  1 14:44:04 2012] fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun  1 14:44:04 2012] Fit fullrun_mos2_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun  1 14:44:28 2012] Warning, spatial fit 9 centroid is now closest to src. 14
[Fri Jun  1 14:44:28 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:44:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:44:28 2012] Assessing source extent using major
[Fri Jun  1 14:44:28 2012] Source does appear to be extended
[Fri Jun  1 14:44:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:49:43 2012] XMMSAS src. selection expression = ellipse(21495.500259, 36361.934570, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 15:49:43 2012] Writing source region out to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src13_src.reg
[Fri Jun  1 15:49:43 2012] Extracting stamp from image fullrun_mos2_xmm0101640401_pi300-10000_cl_sm2.00.img.gz, (210, 381) - (285, 456)
[Fri Jun  1 15:49:43 2012] XMMSAS bgd. selection expression = annulus(21495.500259, 36361.934570, 1087.500000, 2175.000000, X, Y) && !ellipse(21342.775009, 35464.054108, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 15:49:43 2012] Writing fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src13.gif
[Fri Jun  1 15:51:31 2012] Mean detx,y = (-9314.82, 2802.90) 
[Fri Jun  1 15:51:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:51:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:51:41 2012] Setting source spectrum file to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun  1 15:51:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Jun  1 16:02:43 2012] Not generating rmf since there are only 29 counts
[Fri Jun  1 16:02:43 2012] rmf not generated due to insufficient counts
[Fri Jun  1 16:04:49 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:04:49 2012] Error reading totcts from fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun  1 16:04:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:04:49 2012] Using photon index=1.80, rate=0.00244, arf fullrun_mos2_xmm0101640401_pi300-10000_pass1_cl_src13.arf
[Fri Jun  1 16:04:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:04:49 2012] Updating source flux to 5.4e-14
[Fri Jun  1 16:05:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting