[Fri Jun  1 10:16:51 2012] Detection parameters:
  Position = (279.2, 310.2) = 13 44 42.16 55 53 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 571.5 +/- 29.0
  Background counts = 6.7
  Rate = 0.03 +/- 0.001

[Fri Jun  1 10:16:52 2012] Off-axis axis estimate = 1.63'
[Fri Jun  1 11:04:09 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:04:09 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Jun  1 11:04:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Fri Jun  1 11:04:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Jun  1 11:55:20 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 11:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 11:55:20 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 11:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 11:55:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 11:55:20 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 11:55:20 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 11:55:20 2012] Fit fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 12:30:30 2012] Spatial fit model total counts = 625.961000, observed total counts = 624.000000
[Fri Jun  1 12:30:30 2012] Offset between fit and detection position for source 2 = 0.152408 pixels
[Fri Jun  1 12:30:30 2012] 622.739000 total counts/ 244.780000 bgd. counts: snr = 24.157764
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.152408 pixels
  Position = (279.2, 310.3) = 13 44 42.16 55 53 11.2
  Extent = 5.5 (5.1-6.1)", rotation angle = 0
  Source counts = 378.0 +/- 25.0
  Background counts = 244.8
  Rate = 0.02 +/- 0.001
[Fri Jun  1 12:30:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:30:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:30:30 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 12:30:30 2012] Source does appear to be extended
[Fri Jun  1 12:30:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 13:16:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 13:16:52 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Fri Jun  1 13:16:52 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.953
[Fri Jun  1 13:16:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Fri Jun  1 14:00:57 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 14:00:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 14:00:57 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 14:00:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 14:00:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 14:00:58 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 14:00:58 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 14:00:58 2012] Fit fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 14:44:21 2012] Warning, spatial fit 1 centroid is now closest to src. 23
[Fri Jun  1 14:44:21 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:44:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:44:21 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:44:21 2012] Source does appear to be extended
[Fri Jun  1 14:44:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:25:11 2012] XMMSAS src. selection expression = ellipse(24240.702680, 26950.325400, 332.466010, 332.466010, 0.000000, X, Y)
[Fri Jun  1 15:25:11 2012] Writing source region out to fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 15:25:11 2012] Extracting stamp from image fullrun_mos1_xmm0101640401_pi300-10000_cl_sm2.00.img.gz, (260, 291) - (298, 329)
[Fri Jun  1 15:25:11 2012] XMMSAS bgd. selection expression = annulus(24240.702680, 26950.325400, 554.110016, 1108.220032, X, Y) && !ellipse(23318.287800, 28143.976800, 447.112013, 447.112013, 0.000000, X, Y) && !ellipse(24250.113068, 26263.501434, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 15:25:11 2012] Writing fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 15:25:13 2012] Mean detx,y = (256.17, -313.14) 
[Fri Jun  1 15:25:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:25:23 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:25:23 2012] Setting source spectrum file to fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 15:25:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  1 16:04:48 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:04:48 2012] Error reading totcts from fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 16:04:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:04:48 2012] Using photon index=1.80, rate=0.017, arf fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 16:04:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:04:48 2012] Updating source flux to 2.4e-13
[Fri Jun  1 16:05:16 2012] Reading fit data from xmm0101640401/analysis//spectral/fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun  1 16:05:16 2012] Spectral fit parameter nH value = 471969000000.0
[Fri Jun  1 16:05:16 2012] Spectral fit parameter PhoIndex value = 1.4697
[Fri Jun  1 16:05:16 2012] Failed to get F(0.3-8.0) from xmm0101640401/analysis//spectral/fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 16:05:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:05:16 2012] Using Nh = 4.7e+11, photon index=1.47, rate=0.017, arf fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 16:05:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:05:17 2012] Updating source flux to 2.7e-13