[Fri Jun  1 10:16:51 2012] Detection parameters:
  Position = (265.7, 378.8) = 13 44 49.19 55 58 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.6 +/- 8.8
  Background counts = 5.9
  Rate = 0.002 +/- 0.0005

[Fri Jun  1 10:16:52 2012] Off-axis axis estimate = 6.29'
[Fri Jun  1 11:04:09 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 11:04:09 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Fri Jun  1 11:04:09 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Fri Jun  1 11:04:09 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.57"
[Fri Jun  1 11:55:20 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jun  1 11:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src12.csv
[Fri Jun  1 11:55:20 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jun  1 11:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src12.csv
[Fri Jun  1 11:55:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 11:55:20 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jun  1 11:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jun  1 11:55:20 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jun  1 11:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jun  1 11:55:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640401_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 12:30:30 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.882627 pixels away
[Fri Jun  1 12:30:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 12:30:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 12:30:30 2012] Assessing source extent using major
[Fri Jun  1 12:30:30 2012] Source does appear to be extended
[Fri Jun  1 12:30:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 13:16:52 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 13:16:52 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Fri Jun  1 13:16:52 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Fri Jun  1 13:16:52 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.57"
[Fri Jun  1 14:00:58 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun  1 14:00:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src12.csv
[Fri Jun  1 14:00:58 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun  1 14:00:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src12.csv
[Fri Jun  1 14:00:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 14:00:58 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun  1 14:00:58 2012] fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun  1 14:00:58 2012] Fit fullrun_mos1_xmm0101640401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jun  1 14:44:21 2012] Spatial fit model total counts = 100.739000, observed total counts = 94.000000
[Fri Jun  1 14:44:21 2012] Offset between fit and detection position for source 15 = 0.247375 pixels
[Fri Jun  1 14:44:21 2012] 102.361400 total counts/ 77.410200 bgd. counts: snr = 2.835909
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.247375 pixels
  Position = (265.5, 378.9) = 13 44 49.29 55 58 9.7
  Extent = 3.4 (2.4-5.0)", rotation angle = 0
  Source counts = 25.0 +/- 10.1
  Background counts = 77.4
  Rate = 0.001 +/- 0.0005
[Fri Jun  1 14:44:21 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:44:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:44:21 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:44:21 2012] Source does appear to be extended
[Fri Jun  1 14:44:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 15:25:11 2012] XMMSAS src. selection expression = ellipse(23047.866400, 32920.033400, 204.187806, 204.187806, 0.000000, X, Y)
[Fri Jun  1 15:25:11 2012] Writing source region out to fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src15_src.reg
[Fri Jun  1 15:25:11 2012] Extracting stamp from image fullrun_mos1_xmm0101640401_pi300-10000_cl_sm2.00.img.gz, (254, 367) - (277, 391)
[Fri Jun  1 15:25:11 2012] XMMSAS bgd. selection expression = annulus(23047.866400, 32920.033400, 340.313010, 680.626020, X, Y)
[Fri Jun  1 15:25:11 2012] Writing fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src15.gif
[Fri Jun  1 15:28:17 2012] Mean detx,y = (1381.67, 5660.85) 
[Fri Jun  1 15:28:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 15:28:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 15:28:26 2012] Setting source spectrum file to fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun  1 15:28:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jun  1 15:47:53 2012] Not generating rmf since there are only 24 counts
[Fri Jun  1 15:47:53 2012] rmf not generated due to insufficient counts
[Fri Jun  1 16:04:48 2012] Updating aperture counts using extracted products
[Fri Jun  1 16:04:48 2012] Error reading totcts from fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun  1 16:04:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 16:04:48 2012] Using photon index=1.80, rate=0.00112, arf fullrun_mos1_xmm0101640401_pi300-10000_pass1_cl_src15.arf
[Fri Jun  1 16:04:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 16:04:48 2012] Updating source flux to 2.6e-14
[Fri Jun  1 16:04:50 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting