[Tue Jul 24 23:23:08 2012] Detection parameters:
  Position = (279.9, 283.2) = 1 59 50.17 0 23 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8694.8 +/- 111.4
  Background counts = 36.7
  Rate = 0.9 +/- 0.01

[Tue Jul 24 23:23:08 2012] Off-axis axis estimate = 1.74'
[Tue Jul 24 23:24:37 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 23:24:37 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Jul 24 23:24:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Tue Jul 24 23:24:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Jul 24 23:56:16 2012] fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 24 23:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 23:56:16 2012] fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 24 23:56:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 23:56:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 23:56:16 2012] fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 24 23:56:16 2012] fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 24 23:56:16 2012] Fit fullrun_pn_xmm0101640201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 25 00:27:08 2012] Spatial fit model total counts = 4656.860000, observed total counts = 4606.000000
[Wed Jul 25 00:27:08 2012] Offset between fit and detection position for source 1 = 0.156014 pixels
[Wed Jul 25 00:27:08 2012] 4648.440000 total counts/ 1031.750000 bgd. counts: snr = 112.596281
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.156014 pixels
  Position = (279.9, 283.3) = 1 59 50.16 0 23 41.2
  Extent = 5.7 (5.6-5.9)", rotation angle = 0
  Source counts = 3616.7 +/- 68.2
  Background counts = 1031.8
  Rate = 0.7 +/- 0.01
[Wed Jul 25 00:27:08 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 00:27:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 00:27:08 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 00:27:08 2012] Source does appear to be extended
[Wed Jul 25 00:27:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 00:27:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:27:18 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Wed Jul 25 00:27:18 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.909
[Wed Jul 25 00:27:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.73"
[Wed Jul 25 00:50:42 2012] fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 00:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 00:50:42 2012] fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 00:50:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 00:50:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:50:42 2012] fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 00:50:42 2012] fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 00:50:42 2012] Fit fullrun_pn_xmm0101640201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 01:21:56 2012] Spatial fit model total counts = 4660.430000, observed total counts = 4606.000000
[Wed Jul 25 01:21:56 2012] Offset between fit and detection position for source 1 = 0.000051 pixels
[Wed Jul 25 01:21:56 2012] 4652.000000 total counts/ 1032.200000 bgd. counts: snr = 112.668535
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000051 pixels
  Position = (279.9, 283.3) = 1 59 50.16 0 23 41.2
  Extent = 5.7 (5.6-5.9)", rotation angle = 0
  Source counts = 3619.8 +/- 68.2
  Background counts = 1032.2
  Rate = 0.7 +/- 0.01
[Wed Jul 25 01:21:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 01:21:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 01:21:56 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 01:21:56 2012] Source does appear to be extended
[Wed Jul 25 01:21:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 01:22:06 2012] Counts = 3619.800000, rescaling region sizes by 2.000000
[Wed Jul 25 01:22:06 2012] XMMSAS src. selection expression = ellipse(24302.695100, 24602.937000, 687.544820, 687.544820, 0.000000, X, Y)
[Wed Jul 25 01:22:06 2012] Writing source region out to fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 25 01:22:06 2012] Extracting stamp from image fullrun_pn_xmm0101640201_pi300-10000_cl_sm2.00.img.gz, (240, 244) - (319, 323)
[Wed Jul 25 01:22:06 2012] XMMSAS bgd. selection expression = annulus(24302.695100, 24602.937000, 2291.816066, 4583.632132, X, Y) && !ellipse(22628.801600, 28426.919000, 476.925614, 476.925614, 0.000000, X, Y) && !ellipse(27147.713806, 22146.147049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.319305, 21022.692642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19069.292000, 19551.168000, 1663.560048, 1663.560048, 0.000000, X, Y)
[Wed Jul 25 01:22:06 2012] Writing fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1.gif
[Wed Jul 25 01:22:12 2012] Mean detx,y = (92.54, -258.74) 
[Wed Jul 25 01:22:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 01:23:04 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 01:23:04 2012] Setting source spectrum file to fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 01:23:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 25 02:16:01 2012] Updating aperture counts using extracted products
[Wed Jul 25 02:16:01 2012] Error reading totcts from fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 02:16:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 02:16:01 2012] Using photon index=1.80, rate=0.737, arf fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 02:16:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 02:16:01 2012] Updating source flux to 1.9e-12
[Wed Jul 25 02:16:48 2012] Reading fit data from xmm0101640201/analysis//spectral/fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 25 02:16:48 2012] Spectral fit parameter nH value = 5.99447e+18
[Wed Jul 25 02:16:48 2012] Spectral fit parameter PhoIndex value = 2.34714
[Wed Jul 25 02:16:48 2012] Failed to get F(0.3-8.0) from xmm0101640201/analysis//spectral/fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 02:16:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 02:16:48 2012] Using Nh = 6e+18, photon index=2.35, rate=0.737, arf fullrun_pn_xmm0101640201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 02:16:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 02:16:48 2012] Updating source flux to 1.4e-12