[Tue Jul 24 23:23:24 2012] Detection parameters:
  Position = (279.7, 283.3) = 1 59 50.20 0 23 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3285.7 +/- 68.4
  Background counts = 15.9
  Rate = 0.3 +/- 0.007

[Tue Jul 24 23:23:24 2012] Off-axis axis estimate = 1.75'
[Tue Jul 24 23:56:17 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 23:56:17 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Jul 24 23:56:17 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Tue Jul 24 23:56:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Jul 25 00:11:49 2012] fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 00:11:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 00:11:49 2012] fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 00:11:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 00:11:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 00:11:49 2012] fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 00:11:49 2012] fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 00:11:49 2012] Fit fullrun_mos1_xmm0101640201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 25 00:27:10 2012] Spatial fit model total counts = 2490.000000, observed total counts = 2490.000000
[Wed Jul 25 00:27:10 2012] Offset between fit and detection position for source 1 = 0.172906 pixels
[Wed Jul 25 00:27:10 2012] 2496.635000 total counts/ 588.475000 bgd. counts: snr = 78.659427
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.172906 pixels
  Position = (279.8, 283.4) = 1 59 50.19 0 23 41.6
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1908.2 +/- 50.0
  Background counts = 588.5
  Rate = 0.2 +/- 0.006
[Wed Jul 25 00:27:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 00:27:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 00:27:10 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 00:27:10 2012] Source does appear to be extended
[Wed Jul 25 00:27:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 00:50:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 00:50:42 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Wed Jul 25 00:50:42 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.989
[Wed Jul 25 00:50:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Wed Jul 25 01:06:52 2012] fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 01:06:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 01:06:52 2012] fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 01:06:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 01:06:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 01:06:52 2012] fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 01:06:52 2012] fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 01:06:52 2012] Fit fullrun_mos1_xmm0101640201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 01:21:58 2012] Spatial fit model total counts = 2479.000000, observed total counts = 2479.000000
[Wed Jul 25 01:21:58 2012] Offset between fit and detection position for source 1 = 0.012174 pixels
[Wed Jul 25 01:21:58 2012] 2496.808000 total counts/ 597.078000 bgd. counts: snr = 77.745694
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012174 pixels
  Position = (279.8, 283.4) = 1 59 50.20 0 23 41.6
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1899.7 +/- 50.0
  Background counts = 597.1
  Rate = 0.2 +/- 0.006
[Wed Jul 25 01:21:59 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 01:21:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 01:21:59 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 01:21:59 2012] Source does appear to be extended
[Wed Jul 25 01:21:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 01:46:18 2012] Counts = 1899.730000, rescaling region sizes by 2.000000
[Wed Jul 25 01:46:18 2012] XMMSAS src. selection expression = ellipse(24291.022400, 24610.570200, 644.634019, 644.634019, 0.000000, X, Y)
[Wed Jul 25 01:46:18 2012] Writing source region out to fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 25 01:46:18 2012] Extracting stamp from image fullrun_mos1_xmm0101640201_pi300-10000_cl_sm2.00.img.gz, (243, 246) - (317, 320)
[Wed Jul 25 01:46:18 2012] XMMSAS bgd. selection expression = annulus(24291.022400, 24610.570200, 2148.780062, 4297.560124, X, Y) && !ellipse(22616.877106, 28418.822357, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 01:46:18 2012] Writing fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1.gif
[Wed Jul 25 01:46:20 2012] Mean detx,y = (322.78, -209.93) 
[Wed Jul 25 01:46:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 01:47:01 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 01:47:01 2012] Setting source spectrum file to fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 01:47:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 25 02:16:01 2012] Updating aperture counts using extracted products
[Wed Jul 25 02:16:01 2012] Error reading totcts from fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 02:16:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 02:16:01 2012] Using photon index=1.80, rate=0.217, arf fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 02:16:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 02:16:01 2012] Updating source flux to 2.2e-12
[Wed Jul 25 02:16:13 2012] Reading fit data from xmm0101640201/analysis//spectral/fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 25 02:16:13 2012] Spectral fit parameter nH value = 4.18815e+15
[Wed Jul 25 02:16:13 2012] Spectral fit parameter PhoIndex value = 2.28468
[Wed Jul 25 02:16:13 2012] Failed to get F(0.3-8.0) from xmm0101640201/analysis//spectral/fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 02:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 02:16:13 2012] Using Nh = 4.2e+15, photon index=2.28, rate=0.217, arf fullrun_mos1_xmm0101640201_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 02:16:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 02:16:13 2012] Updating source flux to 1.8e-12