[Wed Jun 13 10:23:10 2012] Detection parameters:
  Position = (310.0, 317.9) = 16 52 58.81 2 24 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4166.7 +/- 78.1
  Background counts = 55.7
  Rate = 0.2 +/- 0.003

[Wed Jun 13 10:23:10 2012] Off-axis axis estimate = 1.64'
[Wed Jun 13 11:05:37 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:05:37 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Jun 13 11:05:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Jun 13 11:05:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Jun 13 11:19:39 2012] fullrun_mos2_xmm0101640101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 11:19:39 2012] fullrun_mos2_xmm0101640101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 11:19:39 2012] Fit fullrun_mos2_xmm0101640101_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Jun 13 11:19:39 2012] fullrun_mos2_xmm0101640101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 11:19:39 2012] fullrun_mos2_xmm0101640101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 11:19:39 2012] Fit fullrun_mos2_xmm0101640101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 11:19:47 2012] Spatial fit model total counts = 3332.060000, observed total counts = 3292.000000
[Wed Jun 13 11:19:47 2012] Offset between fit and detection position for source 1 = 0.193149 pixels
[Wed Jun 13 11:19:47 2012] 3327.470000 total counts/ 1061.070000 bgd. counts: snr = 69.576815
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.193149 pixels
  Position = (309.8, 317.9) = 16 52 58.87 2 24 4.3
  Extent = 6.8 (6.5-6.9)", rotation angle = 0
  Source counts = 2266.4 +/- 57.7
  Background counts = 1061.1
  Rate = 0.1 +/- 0.003
[Wed Jun 13 11:19:47 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:19:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:19:47 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 11:19:47 2012] Source does appear to be extended
[Wed Jun 13 11:19:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:52:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:52:21 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Wed Jun 13 11:52:21 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Wed Jun 13 11:52:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.78"
[Wed Jun 13 12:03:02 2012] fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 12:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 12:03:02 2012] fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 12:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 12:03:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:03:02 2012] fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 12:03:02 2012] fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 12:03:02 2012] Fit fullrun_mos2_xmm0101640101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 12:03:09 2012] Spatial fit model total counts = 3332.060000, observed total counts = 3292.000000
[Wed Jun 13 12:03:09 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Wed Jun 13 12:03:09 2012] 3327.470000 total counts/ 1061.070000 bgd. counts: snr = 69.576815
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (309.8, 317.9) = 16 52 58.87 2 24 4.3
  Extent = 6.8 (6.5-6.9)", rotation angle = 0
  Source counts = 2266.4 +/- 57.7
  Background counts = 1061.1
  Rate = 0.1 +/- 0.003
[Wed Jun 13 12:03:09 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:03:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:03:09 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 12:03:09 2012] Source does appear to be extended
[Wed Jun 13 12:03:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:39:24 2012] Counts = 2266.400000, rescaling region sizes by 2.000000
[Wed Jun 13 12:39:24 2012] XMMSAS src. selection expression = ellipse(26905.841160, 27605.269600, 813.696023, 813.696023, 0.000000, X, Y)
[Wed Jun 13 12:39:24 2012] Writing source region out to fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 12:39:24 2012] Extracting stamp from image fullrun_mos2_xmm0101640101_pi300-10000_cl_sm2.00.img.gz, (263, 271) - (357, 365)
[Wed Jun 13 12:39:24 2012] XMMSAS bgd. selection expression = annulus(26905.841160, 27605.269600, 2712.320078, 5424.640156, X, Y) && !ellipse(27660.994690, 26779.957733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.363892, 28475.026672, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 12:39:24 2012] Writing fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 12:39:26 2012] Mean detx,y = (178.91, 42.14) 
[Wed Jun 13 12:39:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:40:52 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:40:52 2012] Setting source spectrum file to fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 12:40:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 12:51:29 2012] Updating aperture counts using extracted products
[Wed Jun 13 12:51:29 2012] Error reading totcts from fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 12:51:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:51:29 2012] Using photon index=1.80, rate=0.129, arf fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 12:51:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:51:29 2012] Updating source flux to 1.4e-12
[Wed Jun 13 12:51:56 2012] Reading fit data from xmm0101640101/analysis//spectral/fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 13 12:51:56 2012] Spectral fit parameter nH value = 2.01884e+21
[Wed Jun 13 12:51:56 2012] Spectral fit parameter PhoIndex value = 2.04441
[Wed Jun 13 12:51:56 2012] Failed to get F(0.3-8.0) from xmm0101640101/analysis//spectral/fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 12:51:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:51:56 2012] Using Nh = 2e+21, photon index=2.04, rate=0.129, arf fullrun_mos2_xmm0101640101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 12:51:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:51:56 2012] Updating source flux to 1.4e-12