[Wed Jun 13 10:22:57 2012] Detection parameters:
  Position = (225.1, 350.4) = 16 53 23.44 2 26 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.9 +/- 14.3
  Background counts = 51.1
  Rate = 0.005 +/- 0.001

[Wed Jun 13 10:22:57 2012] Off-axis axis estimate = 6.51'
[Wed Jun 13 10:52:10 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 10:52:10 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Wed Jun 13 10:52:10 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Wed Jun 13 10:52:10 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.68"
[Wed Jun 13 11:05:37 2012] fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 13 11:05:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_src3.csv
[Wed Jun 13 11:05:37 2012] fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 13 11:05:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_src3.csv
[Wed Jun 13 11:05:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:05:37 2012] fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 13 11:05:37 2012] fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 13 11:05:37 2012] Fit fullrun_mos1_xmm0101640101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jun 13 11:19:45 2012] Spatial fit model total counts = 221.213000, observed total counts = 214.000000
[Wed Jun 13 11:19:45 2012] Offset between fit and detection position for source 3 = 0.129417 pixels
[Wed Jun 13 11:19:45 2012] 217.530700 total counts/ 182.590000 bgd. counts: snr = 2.585789
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.129417 pixels
  Position = (225.2, 350.2) = 16 53 23.44 2 26 25.2
  Extent = 5.7 (3.2-9.0)", rotation angle = 0
  Source counts = 34.9 +/- 14.7
  Background counts = 182.6
  Rate = 0.002 +/- 0.0009
[Wed Jun 13 11:19:45 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:19:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:19:45 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 11:19:45 2012] Source does appear to be extended
[Wed Jun 13 11:19:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:42:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:42:09 2012] Initial guess for spatial extent in simple fitting = 5.75"
[Wed Jun 13 11:42:09 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.207
[Wed Jun 13 11:42:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.75"
[Wed Jun 13 11:52:21 2012] fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 13 11:52:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_src3.csv
[Wed Jun 13 11:52:21 2012] fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 13 11:52:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_src3.csv
[Wed Jun 13 11:52:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:52:21 2012] fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 13 11:52:21 2012] fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 13 11:52:21 2012] Fit fullrun_mos1_xmm0101640101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jun 13 12:03:07 2012] Spatial fit model total counts = 222.479000, observed total counts = 214.000000
[Wed Jun 13 12:03:07 2012] Offset between fit and detection position for source 3 = 0.069873 pixels
[Wed Jun 13 12:03:07 2012] 218.743800 total counts/ 183.124000 bgd. counts: snr = 2.632200
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.069873 pixels
  Position = (225.2, 350.3) = 16 53 23.44 2 26 25.5
  Extent = 5.7 (3.2-9.1)", rotation angle = 0
  Source counts = 35.6 +/- 14.8
  Background counts = 183.1
  Rate = 0.002 +/- 0.0009
[Wed Jun 13 12:03:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:03:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:03:07 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 12:03:07 2012] Source does appear to be extended
[Wed Jun 13 12:03:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:31:10 2012] XMMSAS src. selection expression = ellipse(19541.531560, 30428.984400, 343.524010, 343.524010, 0.000000, X, Y)
[Wed Jun 13 12:31:10 2012] Writing source region out to fullrun_mos1_xmm0101640101_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 13 12:31:10 2012] Extracting stamp from image fullrun_mos1_xmm0101640101_pi300-10000_cl_sm2.00.img.gz, (205, 331) - (245, 370)
[Wed Jun 13 12:31:10 2012] XMMSAS bgd. selection expression = annulus(19541.531560, 30428.984400, 572.540016, 1145.080033, X, Y)
[Wed Jun 13 12:31:10 2012] Writing fullrun_mos1_xmm0101640101_pi300-10000_pass1_cl_src3.gif
[Wed Jun 13 12:32:24 2012] Mean detx,y = (3234.42, -7619.48) 
[Wed Jun 13 12:32:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:32:37 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:32:37 2012] Setting source spectrum file to fullrun_mos1_xmm0101640101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 13 12:32:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0101640101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 13 12:39:04 2012] Not generating rmf since there are only 35 counts
[Wed Jun 13 12:39:04 2012] rmf not generated due to insufficient counts
[Wed Jun 13 12:51:29 2012] Updating aperture counts using extracted products
[Wed Jun 13 12:51:29 2012] Error reading totcts from fullrun_mos1_xmm0101640101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 13 12:51:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:51:29 2012] Using photon index=1.80, rate=0.00207, arf fullrun_mos1_xmm0101640101_pi300-10000_pass1_cl_src3.arf
[Wed Jun 13 12:51:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:51:29 2012] Updating source flux to 3.7e-14
[Wed Jun 13 12:51:30 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting