[Fri Jun 15 15:17:45 2012] Detection parameters:
  Position = (291.8, 344.1) = 4 21 55.87 28 22 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.0 +/- 22.6
  Background counts = 179.8
  Rate = 0.004 +/- 0.0007

[Fri Jun 15 15:17:45 2012] Off-axis axis estimate = 3.34'
[Fri Jun 15 15:21:13 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:21:13 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Fri Jun 15 15:21:13 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Fri Jun 15 15:21:13 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.10"
[Fri Jun 15 16:49:06 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src29.ximg exists
[Fri Jun 15 16:49:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src29.csv
[Fri Jun 15 16:49:06 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Jun 15 16:49:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src29.csv
[Fri Jun 15 16:49:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 16:49:06 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Jun 15 16:49:06 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Jun 15 16:49:06 2012] Fit fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Jun 15 17:43:42 2012] Spatial fit model total counts = 504.921000, observed total counts = 505.000000
[Fri Jun 15 17:43:42 2012] Offset between fit and detection position for source 30 = 1.902180 pixels
[Fri Jun 15 17:43:42 2012] 463.467000 total counts/ 257.219000 bgd. counts: snr = 12.859919
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.902180 pixels
  Position = (292.6, 345.8) = 4 21 55.61 28 22 46.5
  Extent = 16.2 (16.1-32.4)", rotation angle = 0
  Source counts = 206.2 +/- 21.5
  Background counts = 257.2
  Rate = 0.01 +/- 0.001
[Fri Jun 15 17:43:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:43:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:43:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:43:42 2012] Source does appear to be extended
[Fri Jun 15 17:43:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:43:42 2012] Source is confused with source 29
[Fri Jun 15 17:43:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:43:55 2012] Initial guess for spatial extent in simple fitting = 16.20"
[Fri Jun 15 17:43:55 2012] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.009
[Fri Jun 15 17:43:55 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 16.20"
[Fri Jun 15 19:39:44 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src28.ximg exists
[Fri Jun 15 19:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src28.csv
[Fri Jun 15 19:39:44 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Jun 15 19:39:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src28.csv
[Fri Jun 15 19:39:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:39:45 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Jun 15 19:39:45 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Jun 15 19:39:45 2012] Fit fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Jun 15 20:11:48 2012] Warning, spatial fit 28 centroid is now closest to src. 31
[Fri Jun 15 20:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 20:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 20:11:48 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 20:11:48 2012] Source does appear to be extended
[Fri Jun 15 20:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 20:12:02 2012] XMMSAS src. selection expression = ellipse(25403.562000, 30036.569000, 972.048028, 972.048028, 0.000000, X, Y)
[Fri Jun 15 20:12:02 2012] Writing source region out to fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src30_src.reg
[Fri Jun 15 20:12:02 2012] Extracting stamp from image fullrun_pn_xmm0101440701_pi300-10000_cl_sm2.00.img.gz, (237, 290) - (348, 402)
[Fri Jun 15 20:12:02 2012] XMMSAS bgd. selection expression = annulus(25403.562000, 30036.569000, 1620.080047, 3240.160093, X, Y) && !ellipse(23398.848000, 33504.758400, 456.262413, 456.262413, 0.000000, X, Y) && !ellipse(24092.768200, 30752.565000, 372.712811, 372.712811, 0.000000, X, Y) && !ellipse(25819.960529, 33401.638479, 1709.488049, 447.795081, 99.835551, X, Y) && !ellipse(25757.771666, 32943.406841, 1496.040043, 370.303425, 100.388769, X, Y) && !ellipse(25715.360020, 32611.540600, 1709.488049, 239.347207, 101.009000, X, Y) && !ellipse(25595.824600, 31858.119000, 584.937617, 584.937617, 0.000000, X, Y) && !ellipse(25561.337768, 31453.158013, 1352.912039, 362.774598, 100.784385, X, Y) && !ellipse(25380.687587, 30710.057920, 1352.912039, 604.529951, 100.407531, X, Y) && !ellipse(25221.115600, 29042.746200, 526.029615, 526.029615, 0.000000, X, Y) && !ellipse(25097.854680, 28444.407600, 607.664017, 607.664017, 0.000000, X, Y) && !ellipse(25015.240000, 27619.176400, 1505.192043, 343.016010, 99.668410, X, Y) && !ellipse(24969.045737, 27355.083986, 1474.472042, 326.210605, 107.336991, X, Y) && !ellipse(24945.404109, 27245.820242, 1146.864033, 327.607085, 104.638807, X, Y) && !ellipse(24750.450000, 26957.068000, 1146.864033, 1146.864033, 0.000000, X, Y) && !ellipse(23749.034698, 26036.461914, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 20:12:02 2012] Writing fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src30.gif
[Fri Jun 15 20:36:15 2012] Mean detx,y = (46.98, 5466.24) 
[Fri Jun 15 20:36:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 20:36:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 20:36:46 2012] Setting source spectrum file to fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jun 15 20:36:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jun 15 22:40:29 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:40:29 2012] Error reading totcts from fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jun 15 22:40:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:40:29 2012] Using photon index=1.80, rate=0.0112, arf fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src30.arf
[Fri Jun 15 22:40:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:40:29 2012] Updating source flux to 3.4e-14
[Fri Jun 15 22:41:27 2012] Flag c found in src. 30 procflags, skipping spectral fitting