[Fri Jun 15 15:17:44 2012] Detection parameters:
  Position = (282.5, 281.8) = 4 21 58.92 28 18 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83322.8 +/- 341.4
  Background counts = 200.3
  Rate = 2 +/- 0.008

[Fri Jun 15 15:17:45 2012] Off-axis axis estimate = 1.67'
[Fri Jun 15 15:21:13 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:21:13 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Jun 15 15:21:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Fri Jun 15 15:21:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Jun 15 16:49:05 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 16:49:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 16:49:05 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 16:49:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 16:49:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 16:49:06 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 16:49:06 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 16:49:06 2012] Fit fullrun_pn_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 17:43:42 2012] Spatial fit model total counts = 36748.000000, observed total counts = 36748.000000
[Fri Jun 15 17:43:42 2012] Offset between fit and detection position for source 1 = 0.155821 pixels
[Fri Jun 15 17:43:42 2012] 36758.430000 total counts/ 7416.130000 bgd. counts: snr = 340.726166
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.155821 pixels
  Position = (282.5, 281.6) = 4 21 58.93 28 18 7.3
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 29342.3 +/- 191.7
  Background counts = 7416.1
  Rate = 2 +/- 0.01
[Fri Jun 15 17:43:42 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:43:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:43:42 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:43:42 2012] Source does appear to be extended
[Fri Jun 15 17:43:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:43:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:43:55 2012] Initial guess for spatial extent in simple fitting = 5.87"
[Fri Jun 15 17:43:55 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.658
[Fri Jun 15 17:43:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.87"
[Fri Jun 15 19:39:43 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 19:39:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 19:39:43 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 19:39:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 19:39:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:39:44 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 19:39:44 2012] fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 19:39:44 2012] Fit fullrun_pn_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 20:11:48 2012] Spatial fit model total counts = 36748.000000, observed total counts = 36748.000000
[Fri Jun 15 20:11:48 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Fri Jun 15 20:11:48 2012] 36758.430000 total counts/ 7416.130000 bgd. counts: snr = 340.726166
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (282.5, 281.6) = 4 21 58.93 28 18 7.3
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 29342.3 +/- 191.7
  Background counts = 7416.1
  Rate = 2 +/- 0.01
[Fri Jun 15 20:11:48 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 20:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 20:11:48 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 20:11:48 2012] Source does appear to be extended
[Fri Jun 15 20:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 20:12:01 2012] Counts = 29342.300000, rescaling region sizes by 3.000000
[Fri Jun 15 20:12:01 2012] XMMSAS src. selection expression = ellipse(24527.170200, 24453.242000, 1055.950230, 1055.950230, 0.000000, X, Y)
[Fri Jun 15 20:12:01 2012] Writing source region out to fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 20:12:01 2012] Extracting stamp from image fullrun_pn_xmm0101440701_pi300-10000_cl_sm2.00.img.gz, (222, 221) - (343, 342)
[Fri Jun 15 20:12:01 2012] XMMSAS bgd. selection expression = annulus(24527.170200, 24453.242000, 5279.751152, 10559.502304, X, Y) && !ellipse(23398.848000, 33504.758400, 456.262413, 456.262413, 0.000000, X, Y) && !ellipse(13640.298721, 16327.230850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28600.806030, 23376.889862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23754.018188, 23139.493073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29468.737762, 16894.909302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25100.854000, 34595.582000, 661.201619, 661.201619, 0.000000, X, Y) && !ellipse(26174.867800, 35621.125400, 1682.632048, 485.048014, 100.697000, X, Y) && !ellipse(24092.768200, 30752.565000, 372.712811, 372.712811, 0.000000, X, Y) && !ellipse(17449.526337, 17809.004028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35177.990631, 16964.976852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26412.650000, 35590.512000, 1638.192047, 1638.192047, 0.000000, X, Y) && !ellipse(26101.568542, 35096.993652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26005.740570, 34230.875305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25819.960529, 33401.638479, 1709.488049, 447.795081, 99.835551, X, Y) && !ellipse(25757.771666, 32943.406841, 1496.040043, 370.303425, 100.388769, X, Y) && !ellipse(25715.360020, 32611.540600, 1709.488049, 239.347207, 101.009000, X, Y) && !ellipse(25595.824600, 31858.119000, 584.937617, 584.937617, 0.000000, X, Y) && !ellipse(25561.337768, 31453.158013, 1352.912039, 362.774598, 100.784385, X, Y) && !ellipse(25380.687587, 30710.057920, 1352.912039, 604.529951, 100.407531, X, Y) && !ellipse(25403.562000, 30036.569000, 1296.064037, 1296.064037, 0.000000, X, Y) && !ellipse(25221.115600, 29042.746200, 526.029615, 526.029615, 0.000000, X, Y) && !ellipse(25097.854680, 28444.407600, 607.664017, 607.664017, 0.000000, X, Y) && !ellipse(15052.527390, 15817.737366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25015.240000, 27619.176400, 1505.192043, 343.016010, 99.668410, X, Y) && !ellipse(24969.045737, 27355.083986, 1474.472042, 326.210605, 107.336991, X, Y) && !ellipse(24945.404109, 27245.820242, 1146.864033, 327.607085, 104.638807, X, Y) && !ellipse(14964.576889, 27005.096252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24750.450000, 26957.068000, 1146.864033, 1146.864033, 0.000000, X, Y) && !ellipse(23749.034698, 26036.461914, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 20:12:01 2012] Writing fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 20:12:19 2012] Mean detx,y = (97.05, -164.37) 
[Fri Jun 15 20:12:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 20:15:48 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 20:15:48 2012] Setting source spectrum file to fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 20:15:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 22:40:28 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:40:28 2012] Error reading totcts from fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 22:40:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:40:29 2012] Using photon index=1.80, rate=1.59, arf fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 22:40:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:40:29 2012] Updating source flux to 3.8e-12
[Fri Jun 15 22:43:50 2012] Reading fit data from xmm0101440701/analysis//spectral/fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 22:43:50 2012] Spectral fit parameter nH value = 3.67492e+21
[Fri Jun 15 22:43:50 2012] Spectral fit parameter PhoIndex value = 3.89935
[Fri Jun 15 22:43:50 2012] Failed to get F(0.3-8.0) from xmm0101440701/analysis//spectral/fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 22:43:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:43:50 2012] Using Nh = 3.7e+21, photon index=3.90, rate=1.59, arf fullrun_pn_xmm0101440701_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 22:43:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:43:50 2012] Updating source flux to 2.7e-12