[Fri Jun 15 15:18:27 2012] Detection parameters:
  Position = (274.5, 291.0) = 4 22 1.56 28 18 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.2 +/- 15.2
  Background counts = 48.5
  Rate = 0.002 +/- 0.0005

[Fri Jun 15 15:18:27 2012] Off-axis axis estimate = 1.82'
[Fri Jun 15 17:00:46 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:00:46 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Jun 15 17:00:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.680
[Fri Jun 15 17:00:46 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.34"
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src18.ximg exists
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Jun 15 17:43:34 2012] Fit fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src18 appears to have run properly
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Jun 15 17:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Jun 15 17:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Jun 15 17:43:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:43:47 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.756605 pixels away
[Fri Jun 15 17:43:47 2012] Source 9 is offset by -6.277472 and 5.741675 pixels which is larger than
2 X fitted extent = 2.499237 x 3.794717, not incorporating fit results
[Fri Jun 15 17:43:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:43:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:43:47 2012] Assessing source extent using major
[Fri Jun 15 17:43:47 2012] Source does appear to be extended
[Fri Jun 15 17:43:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:53:00 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:53:00 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Jun 15 19:53:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.680
[Fri Jun 15 19:53:00 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.34"
[Fri Jun 15 20:11:40 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun 15 20:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src12.csv
[Fri Jun 15 20:11:40 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun 15 20:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src12.csv
[Fri Jun 15 20:11:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 20:11:40 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun 15 20:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun 15 20:11:40 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun 15 20:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun 15 20:11:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 20:11:53 2012] Spatial fit model total counts = 758.303000, observed total counts = 1945.000000
[Fri Jun 15 20:11:53 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 20:11:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 20:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 20:11:53 2012] Assessing source extent using major
[Fri Jun 15 20:11:53 2012] Source does appear to be extended
[Fri Jun 15 20:11:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:19:14 2012] XMMSAS src. selection expression = ellipse(23830.421967, 25267.963684, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 22:19:14 2012] Writing source region out to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun 15 22:19:14 2012] Extracting stamp from image fullrun_mos2_xmm0101440701_pi300-10000_cl_sm2.00.img.gz, (237, 253) - (312, 328)
[Fri Jun 15 22:19:14 2012] XMMSAS bgd. selection expression = annulus(23830.421967, 25267.963684, 1087.500000, 2175.000000, X, Y) && !ellipse(24536.563600, 24464.477400, 1316.044838, 1316.044838, 0.000000, X, Y) && !ellipse(23832.997345, 23974.035156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.988922, 25991.395447, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 22:19:14 2012] Writing fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src9.gif
[Fri Jun 15 22:29:04 2012] Mean detx,y = (-582.25, -522.09) 
[Fri Jun 15 22:29:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 22:29:14 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 22:29:14 2012] Setting source spectrum file to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 22:29:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun 15 22:39:17 2012] Not generating rmf since there are only 63 counts
[Fri Jun 15 22:39:17 2012] rmf not generated due to insufficient counts
[Fri Jun 15 22:40:30 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:40:30 2012] Error reading totcts from fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 22:40:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:40:30 2012] Using photon index=1.80, rate=0.00192, arf fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src9.arf
[Fri Jun 15 22:40:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:40:30 2012] Updating source flux to 2.1e-14
[Fri Jun 15 22:41:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting