[Fri Jun 15 15:18:27 2012] Detection parameters:
  Position = (269.5, 385.8) = 4 22 3.21 28 25 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1070.1 +/- 40.3
  Background counts = 38.8
  Rate = 0.04 +/- 0.001

[Fri Jun 15 15:18:27 2012] Off-axis axis estimate = 6.67'
[Fri Jun 15 17:00:46 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:00:46 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Fri Jun 15 17:00:46 2012] source mask rpix=2.2, npix_max = 30, mask sum = 29, frac = 0.962
[Fri Jun 15 17:00:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.77"
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 17:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 17:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 17:43:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 17:43:34 2012] Fit fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 15 17:43:47 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Fri Jun 15 17:43:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:43:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:43:47 2012] Assessing source extent using major
[Fri Jun 15 17:43:47 2012] Source does appear to be extended
[Fri Jun 15 17:43:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:53:00 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:53:00 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Fri Jun 15 19:53:00 2012] source mask rpix=2.2, npix_max = 30, mask sum = 29, frac = 0.962
[Fri Jun 15 19:53:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.77"
[Fri Jun 15 20:11:39 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 20:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 20:11:39 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 20:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 20:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 20:11:40 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 20:11:40 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 20:11:40 2012] Fit fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 20:11:53 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Fri Jun 15 20:11:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 20:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 20:11:53 2012] Assessing source extent using major
[Fri Jun 15 20:11:53 2012] Source does appear to be extended
[Fri Jun 15 20:11:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:19:14 2012] Counts = 1070.071411, rescaling region sizes by 2.000000
[Fri Jun 15 22:19:14 2012] XMMSAS src. selection expression = ellipse(23399.529297, 33518.971680, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 15 22:19:14 2012] Writing source region out to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 15 22:19:14 2012] Extracting stamp from image fullrun_mos2_xmm0101440701_pi300-10000_cl_sm2.00.img.gz, (195, 311) - (345, 461)
[Fri Jun 15 22:19:14 2012] XMMSAS bgd. selection expression = annulus(23399.529297, 33518.971680, 4350.000000, 8700.000000, X, Y) && !ellipse(24536.563600, 24464.477400, 1316.044838, 1316.044838, 0.000000, X, Y) && !ellipse(24918.766266, 34648.219360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.997345, 23974.035156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.601562, 30707.420441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.988922, 25991.395447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.421967, 25267.963684, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 22:19:14 2012] Writing fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src2.gif
[Fri Jun 15 22:25:53 2012] Mean detx,y = (-2419.42, -8790.53) 
[Fri Jun 15 22:25:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 22:27:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 22:27:28 2012] Setting source spectrum file to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 22:27:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 15 22:33:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 22:33:57 2012] rmf not generated due to insufficient counts
[Fri Jun 15 22:40:30 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:40:30 2012] Error reading totcts from fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 22:40:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:40:30 2012] Using photon index=1.80, rate=0.0395, arf fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src2.arf
[Fri Jun 15 22:40:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:40:30 2012] Updating source flux to 5.1e-13
[Fri Jun 15 22:41:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting