[Fri Jun 15 15:18:27 2012] Detection parameters:
  Position = (282.6, 281.9) = 4 21 58.90 28 18 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28203.7 +/- 196.4
  Background counts = 48.3
  Rate = 0.8 +/- 0.005

[Fri Jun 15 15:18:27 2012] Off-axis axis estimate = 1.66'
[Fri Jun 15 17:00:46 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:00:46 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Jun 15 17:00:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Fri Jun 15 17:00:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 17:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 17:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 17:43:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 17:43:34 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 17:43:34 2012] Fit fullrun_mos2_xmm0101440701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 17:43:47 2012] Spatial fit model total counts = 23306.800000, observed total counts = 22175.000000
[Fri Jun 15 17:43:47 2012] Offset between fit and detection position for source 1 = 0.091535 pixels
[Fri Jun 15 17:43:47 2012] 23171.890000 total counts/ 5781.290000 bgd. counts: snr = 228.718971
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.091535 pixels
  Position = (282.6, 281.8) = 4 21 58.89 28 18 7.9
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 17390.6 +/- 152.2
  Background counts = 5781.3
  Rate = 0.5 +/- 0.004
[Fri Jun 15 17:43:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:43:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:43:47 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:43:47 2012] Source does appear to be extended
[Fri Jun 15 17:43:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:53:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:53:00 2012] Initial guess for spatial extent in simple fitting = 5.45"
[Fri Jun 15 19:53:00 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.976
[Fri Jun 15 19:53:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.45"
[Fri Jun 15 20:11:39 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 20:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 20:11:39 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 20:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 20:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 20:11:40 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 20:11:40 2012] fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 20:11:40 2012] Fit fullrun_mos2_xmm0101440701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 20:11:53 2012] Spatial fit model total counts = 23254.200000, observed total counts = 22167.000000
[Fri Jun 15 20:11:53 2012] Offset between fit and detection position for source 1 = 0.014436 pixels
[Fri Jun 15 20:11:53 2012] 23249.450000 total counts/ 5795.750000 bgd. counts: snr = 229.262321
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014436 pixels
  Position = (282.6, 281.8) = 4 21 58.89 28 18 7.8
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 17453.7 +/- 152.5
  Background counts = 5795.8
  Rate = 0.5 +/- 0.004
[Fri Jun 15 20:11:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 20:11:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 20:11:53 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 20:11:53 2012] Source does appear to be extended
[Fri Jun 15 20:11:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 22:19:14 2012] Counts = 17453.700000, rescaling region sizes by 3.000000
[Fri Jun 15 22:19:14 2012] XMMSAS src. selection expression = ellipse(24536.563600, 24464.477400, 987.033628, 987.033628, 0.000000, X, Y)
[Fri Jun 15 22:19:14 2012] Writing source region out to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 22:19:14 2012] Extracting stamp from image fullrun_mos2_xmm0101440701_pi300-10000_cl_sm2.00.img.gz, (226, 225) - (339, 338)
[Fri Jun 15 22:19:14 2012] XMMSAS bgd. selection expression = annulus(24536.563600, 24464.477400, 4935.168142, 9870.336284, X, Y) && !ellipse(24918.766266, 34648.219360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23399.529297, 33518.971680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.997345, 23974.035156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.601562, 30707.420441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17430.435349, 17796.781601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.988922, 25991.395447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.421967, 25267.963684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15005.092636, 15780.801926, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 22:19:14 2012] Writing fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 22:19:20 2012] Mean detx,y = (63.16, 16.15) 
[Fri Jun 15 22:19:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 22:23:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 22:23:50 2012] Setting source spectrum file to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 22:23:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 22:40:30 2012] Updating aperture counts using extracted products
[Fri Jun 15 22:40:30 2012] Error reading totcts from fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 22:40:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:40:30 2012] Using photon index=1.80, rate=0.508, arf fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 22:40:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:40:30 2012] Updating source flux to 5.2e-12
[Fri Jun 15 22:41:27 2012] Reading fit data from xmm0101440701/analysis//spectral/fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 22:41:27 2012] Spectral fit parameter nH value = 3.2482e+21
[Fri Jun 15 22:41:27 2012] Spectral fit parameter PhoIndex value = 3.58883
[Fri Jun 15 22:41:27 2012] Failed to get F(0.3-8.0) from xmm0101440701/analysis//spectral/fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 22:41:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 22:41:27 2012] Using Nh = 3.2e+21, photon index=3.59, rate=0.508, arf fullrun_mos2_xmm0101440701_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 22:41:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 22:41:27 2012] Updating source flux to 3.6e-12