[Mon Aug 20 10:33:01 2012] Detection parameters:
  Position = (286.5, 308.9) = 4 24 11.55 14 47 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.4 +/- 17.8
  Background counts = 31.7
  Rate = 0.004 +/- 0.0006

[Mon Aug 20 10:33:02 2012] Off-axis axis estimate = 1.15'
[Mon Aug 20 10:38:01 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 10:38:01 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Mon Aug 20 10:38:01 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.122
[Mon Aug 20 10:38:01 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.01"
[Mon Aug 20 12:43:12 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src32.ximg exists
[Mon Aug 20 12:43:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src32.csv
[Mon Aug 20 12:43:12 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon Aug 20 12:43:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src32.csv
[Mon Aug 20 12:43:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 12:43:13 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon Aug 20 12:43:13 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon Aug 20 12:43:13 2012] Fit fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Mon Aug 20 14:48:34 2012] Spatial fit model total counts = 913.092000, observed total counts = 910.000000
[Mon Aug 20 14:48:34 2012] Offset between fit and detection position for source 32 = 4.723423 pixels
[Mon Aug 20 14:48:34 2012] 935.436000 total counts/ 661.500000 bgd. counts: snr = 10.650848
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.723423 pixels
  Position = (284.8, 304.5) = 4 24 12.06 14 47 8.1
  Extent = 13.7 (13.3-14.0)", rotation angle = 0
  Source counts = 273.9 +/- 30.6
  Background counts = 661.5
  Rate = 0.008 +/- 0.0009
[Mon Aug 20 14:48:34 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 14:48:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 14:48:34 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 14:48:34 2012] Source does appear to be extended
[Mon Aug 20 14:48:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 14:49:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 14:49:05 2012] Initial guess for spatial extent in simple fitting = 13.72"
[Mon Aug 20 14:49:05 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.918
[Mon Aug 20 14:49:05 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 13.72"
[Mon Aug 20 16:40:57 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src30.ximg exists
[Mon Aug 20 16:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src30.csv
[Mon Aug 20 16:40:57 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Aug 20 16:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src30.csv
[Mon Aug 20 16:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:40:58 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Aug 20 16:40:58 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Aug 20 16:40:58 2012] Fit fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Mon Aug 20 17:55:44 2012] Source 32 is offset by 0.122169 and 5.490851 pixels which is larger than
2 X fitted extent = 5.231402 x 5.231402, not incorporating fit results
[Mon Aug 20 17:55:44 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 17:55:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 17:55:44 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 17:55:44 2012] Source does appear to be extended
[Mon Aug 20 17:55:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 17:56:14 2012] XMMSAS src. selection expression = ellipse(24727.325800, 26444.094000, 823.098024, 823.098024, 0.000000, X, Y)
[Mon Aug 20 17:56:14 2012] Writing source region out to fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src32_src.reg
[Mon Aug 20 17:56:14 2012] Extracting stamp from image fullrun_pn_xmm0101440601_pi300-10000_cl_sm2.00.img.gz, (237, 257) - (332, 352)
[Mon Aug 20 17:56:14 2012] XMMSAS bgd. selection expression = annulus(24727.325800, 26444.094000, 1371.830039, 2743.660079, X, Y) && !ellipse(24590.383680, 24506.650200, 1414.874441, 1414.874441, 0.000000, X, Y) && !ellipse(25246.059000, 30183.892000, 1325.104038, 387.322411, 97.121000, X, Y) && !ellipse(25216.131157, 29893.314206, 1323.864038, 428.883688, 95.608488, X, Y) && !ellipse(25133.428400, 29329.827800, 889.504026, 889.504026, 0.000000, X, Y) && !ellipse(25082.518380, 28521.995600, 1213.848035, 454.445613, 94.849100, X, Y) && !ellipse(25109.199400, 28357.294000, 1128.400032, 1128.400032, 0.000000, X, Y) && !ellipse(24953.969299, 27440.521057, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 17:56:14 2012] Writing fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src32.gif
[Mon Aug 20 18:37:29 2012] Mean detx,y = (138.98, 1746.41) 
[Mon Aug 20 18:37:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 18:38:09 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 18:38:09 2012] Setting source spectrum file to fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Aug 20 18:38:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Aug 20 21:53:15 2012] Updating aperture counts using extracted products
[Mon Aug 20 21:53:15 2012] Error reading totcts from fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Aug 20 21:53:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 21:53:17 2012] Using photon index=1.80, rate=0.00801, arf fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src32.arf
[Mon Aug 20 21:53:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 21:53:18 2012] Updating source flux to 2e-14
[Mon Aug 20 21:57:37 2012] Flag b found in src. 32 procflags, skipping spectral fitting