[Mon Aug 20 10:33:00 2012] Detection parameters:
  Position = (283.2, 282.1) = 4 24 12.53 14 45 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70281.0 +/- 317.0
  Background counts = 31.0
  Rate = 2 +/- 0.01

[Mon Aug 20 10:33:02 2012] Off-axis axis estimate = 1.62'
[Mon Aug 20 10:38:01 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 10:38:01 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Aug 20 10:38:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Mon Aug 20 10:38:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Mon Aug 20 12:43:11 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 20 12:43:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 12:43:11 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 20 12:43:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 12:43:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 12:43:12 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 20 12:43:12 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 20 12:43:12 2012] Fit fullrun_pn_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 20 14:48:34 2012] Spatial fit model total counts = 60106.000000, observed total counts = 60106.000000
[Mon Aug 20 14:48:34 2012] Offset between fit and detection position for source 1 = 0.109713 pixels
[Mon Aug 20 14:48:34 2012] 60176.300000 total counts/ 11386.000000 bgd. counts: snr = 457.243877
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.109713 pixels
  Position = (283.2, 282.2) = 4 24 12.53 14 45 31.3
  Extent = 5.9 (5.9-5.9)", rotation angle = 0
  Source counts = 48790.3 +/- 245.3
  Background counts = 11386.0
  Rate = 1 +/- 0.007
[Mon Aug 20 14:48:34 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 14:48:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 14:48:34 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 14:48:34 2012] Source does appear to be extended
[Mon Aug 20 14:48:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 14:49:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 14:49:05 2012] Initial guess for spatial extent in simple fitting = 5.89"
[Mon Aug 20 14:49:05 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.163
[Mon Aug 20 14:49:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.89"
[Mon Aug 20 16:40:56 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 20 16:40:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 16:40:57 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 20 16:40:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 16:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 16:40:57 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 20 16:40:57 2012] fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 20 16:40:57 2012] Fit fullrun_pn_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 20 17:55:44 2012] Spatial fit model total counts = 60104.400000, observed total counts = 60106.000000
[Mon Aug 20 17:55:44 2012] Offset between fit and detection position for source 1 = 0.000229 pixels
[Mon Aug 20 17:55:44 2012] 60174.500000 total counts/ 11376.100000 bgd. counts: snr = 457.518734
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000229 pixels
  Position = (283.2, 282.2) = 4 24 12.53 14 45 31.3
  Extent = 5.9 (5.9-5.9)", rotation angle = 0
  Source counts = 48798.4 +/- 245.3
  Background counts = 11376.1
  Rate = 1 +/- 0.007
[Mon Aug 20 17:55:44 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 17:55:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 17:55:44 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 17:55:44 2012] Source does appear to be extended
[Mon Aug 20 17:55:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 17:56:13 2012] Counts = 48798.400000, rescaling region sizes by 3.000000
[Mon Aug 20 17:56:13 2012] XMMSAS src. selection expression = ellipse(24590.383680, 24506.650200, 1061.155831, 1061.155831, 0.000000, X, Y)
[Mon Aug 20 17:56:13 2012] Writing source region out to fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 20 17:56:13 2012] Extracting stamp from image fullrun_pn_xmm0101440601_pi300-10000_cl_sm2.00.img.gz, (222, 221) - (344, 343)
[Mon Aug 20 17:56:13 2012] XMMSAS bgd. selection expression = annulus(24590.383680, 24506.650200, 5305.779153, 10611.558305, X, Y) && !ellipse(34991.839600, 27350.972800, 463.480013, 463.480013, 0.000000, X, Y) && !ellipse(17759.089478, 21430.652496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21384.020889, 20660.314331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22222.238861, 17359.601822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26818.083954, 15111.491608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25888.635193, 35624.747101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.851013, 34835.866211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.544400, 33972.688000, 869.400025, 869.400025, 0.000000, X, Y) && !ellipse(25644.043274, 33623.274506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25546.751140, 32842.695800, 788.622423, 788.622423, 0.000000, X, Y) && !ellipse(25471.551454, 31985.622442, 1438.160041, 717.275274, 94.372116, X, Y) && !ellipse(25386.318200, 31346.411200, 1323.864038, 393.280811, 98.071570, X, Y) && !ellipse(25246.059000, 30183.892000, 1325.104038, 387.322411, 97.121000, X, Y) && !ellipse(24319.757700, 30069.062600, 517.216015, 517.216015, 0.000000, X, Y) && !ellipse(25216.131157, 29893.314206, 1323.864038, 428.883688, 95.608488, X, Y) && !ellipse(25133.428400, 29329.827800, 889.504026, 889.504026, 0.000000, X, Y) && !ellipse(25082.518380, 28521.995600, 1213.848035, 454.445613, 94.849100, X, Y) && !ellipse(25109.199400, 28357.294000, 1128.400032, 1128.400032, 0.000000, X, Y) && !ellipse(16313.473816, 14180.370178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.969299, 27440.521057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35032.484000, 27394.116600, 1606.008046, 447.168013, 339.977200, X, Y) && !ellipse(29580.578217, 27115.853455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24727.325800, 26444.094000, 1097.464032, 1097.464032, 0.000000, X, Y) && !ellipse(30711.575800, 25331.714800, 399.021611, 399.021611, 0.000000, X, Y) && !ellipse(19950.893158, 24328.877167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25584.849200, 22001.092400, 600.621617, 600.621617, 0.000000, X, Y) && !ellipse(15122.005524, 19806.017502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23220.418365, 19364.929520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23845.173309, 17866.657990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26424.916595, 17158.966568, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 17:56:13 2012] Writing fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1.gif
[Mon Aug 20 17:56:47 2012] Mean detx,y = (94.89, -76.95) 
[Mon Aug 20 17:56:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 18:01:25 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 18:01:26 2012] Setting source spectrum file to fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 18:01:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 20 21:53:13 2012] Updating aperture counts using extracted products
[Mon Aug 20 21:53:13 2012] Error reading totcts from fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 21:53:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 21:53:16 2012] Using photon index=1.80, rate=1.43, arf fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 21:53:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 21:53:16 2012] Updating source flux to 3.4e-12
[Mon Aug 20 22:02:35 2012] Reading fit data from xmm0101440601/analysis//spectral/fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Aug 20 22:02:35 2012] Spectral fit parameter nH value = 4.88301e+21
[Mon Aug 20 22:02:35 2012] Spectral fit parameter PhoIndex value = 5.61945
[Mon Aug 20 22:02:35 2012] Failed to get F(0.3-8.0) from xmm0101440601/analysis//spectral/fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Aug 20 22:02:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 22:02:35 2012] Using Nh = 4.9e+21, photon index=5.62, rate=1.43, arf fullrun_pn_xmm0101440601_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 22:02:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 22:02:35 2012] Updating source flux to 2e-12