[Mon Aug 20 10:34:30 2012] Detection parameters:
  Position = (283.6, 282.1) = 4 24 12.40 14 45 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23902.5 +/- 183.9
  Background counts = 13.0
  Rate = 0.6 +/- 0.004

[Mon Aug 20 10:34:31 2012] Off-axis axis estimate = 1.60'
[Mon Aug 20 13:35:58 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 13:35:58 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Mon Aug 20 13:35:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.070
[Mon Aug 20 13:35:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Mon Aug 20 14:48:19 2012] fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 20 14:48:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 14:48:19 2012] fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 20 14:48:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 14:48:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 14:48:19 2012] fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 20 14:48:19 2012] fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 20 14:48:19 2012] Fit fullrun_mos2_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 20 14:48:49 2012] Spatial fit model total counts = 21883.800000, observed total counts = 20824.000000
[Mon Aug 20 14:48:49 2012] Offset between fit and detection position for source 1 = 0.079255 pixels
[Mon Aug 20 14:48:49 2012] 21782.700000 total counts/ 5222.500000 bgd. counts: snr = 229.153425
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.079255 pixels
  Position = (283.7, 282.1) = 4 24 12.39 14 45 30.7
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 16560.2 +/- 147.6
  Background counts = 5222.5
  Rate = 0.4 +/- 0.003
[Mon Aug 20 14:48:50 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 14:48:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 14:48:50 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 14:48:50 2012] Source does appear to be extended
[Mon Aug 20 14:48:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 17:12:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 17:12:00 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Mon Aug 20 17:12:00 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.965
[Mon Aug 20 17:12:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Mon Aug 20 17:55:30 2012] fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 20 17:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 17:55:30 2012] fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 20 17:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_src1.csv
[Mon Aug 20 17:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 17:55:30 2012] fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 20 17:55:30 2012] fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 20 17:55:30 2012] Fit fullrun_mos2_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 20 17:55:56 2012] Spatial fit model total counts = 21923.800000, observed total counts = 20824.000000
[Mon Aug 20 17:55:56 2012] Offset between fit and detection position for source 1 = 0.000691 pixels
[Mon Aug 20 17:55:56 2012] 21823.000000 total counts/ 5242.000000 bgd. counts: snr = 229.014094
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000691 pixels
  Position = (283.7, 282.1) = 4 24 12.39 14 45 30.7
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 16581.0 +/- 147.7
  Background counts = 5242.0
  Rate = 0.4 +/- 0.003
[Mon Aug 20 17:55:56 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 17:55:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 17:55:56 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 17:55:56 2012] Source does appear to be extended
[Mon Aug 20 17:55:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 20:46:38 2012] Counts = 16581.000000, rescaling region sizes by 3.000000
[Mon Aug 20 20:46:38 2012] XMMSAS src. selection expression = ellipse(24631.518800, 24495.145200, 986.643028, 986.643028, 0.000000, X, Y)
[Mon Aug 20 20:46:38 2012] Writing source region out to fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 20 20:46:38 2012] Extracting stamp from image fullrun_mos2_xmm0101440601_pi300-10000_cl_sm2.00.img.gz, (227, 225) - (340, 339)
[Mon Aug 20 20:46:38 2012] XMMSAS bgd. selection expression = annulus(24631.518800, 24495.145200, 4933.215142, 9866.430284, X, Y) && !ellipse(17785.567410, 21421.050412, 477.347924, 355.884534, 28.705842, X, Y) && !ellipse(22284.155200, 17328.451200, 598.984017, 413.704812, 31.803863, X, Y) && !ellipse(26872.315488, 15100.257957, 497.970280, 320.950921, 355.569245, X, Y) && !ellipse(21425.373600, 20637.549420, 359.348810, 359.348810, 0.000000, X, Y) && !ellipse(30736.267334, 25320.124390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15228.675308, 19776.170990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34529.648407, 27160.686279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23660.139008, 25344.386047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23209.482000, 23580.750000, 1222.848035, 1222.672035, 90.000000, X, Y) && !ellipse(16374.401200, 14164.763380, 675.309619, 675.309619, 0.000000, X, Y)
[Mon Aug 20 20:46:38 2012] Writing fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1.gif
[Mon Aug 20 20:46:48 2012] Mean detx,y = (100.65, -59.45) 
[Mon Aug 20 20:46:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 20:51:13 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 20:51:13 2012] Setting source spectrum file to fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 20:51:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 20 21:53:21 2012] Updating aperture counts using extracted products
[Mon Aug 20 21:53:21 2012] Error reading totcts from fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 21:53:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 21:53:23 2012] Using photon index=1.80, rate=0.384, arf fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 21:53:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 21:53:23 2012] Updating source flux to 3.9e-12
[Mon Aug 20 21:57:37 2012] Reading fit data from xmm0101440601/analysis//spectral/fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Aug 20 21:57:37 2012] Spectral fit parameter nH value = 4.30741e+21
[Mon Aug 20 21:57:37 2012] Spectral fit parameter PhoIndex value = 5.20659
[Mon Aug 20 21:57:37 2012] Failed to get F(0.3-8.0) from xmm0101440601/analysis//spectral/fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Aug 20 21:57:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 21:57:37 2012] Using Nh = 4.3e+21, photon index=5.21, rate=0.384, arf fullrun_mos2_xmm0101440601_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 21:57:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 21:57:37 2012] Updating source flux to 2.4e-12