[Mon Aug 20 10:33:44 2012] Detection parameters:
  Position = (417.7, 210.0) = 4 23 32.22 14 40 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 561.3 +/- 28.7
  Background counts = 10.5
  Rate = 0.01 +/- 0.0007

[Mon Aug 20 10:33:45 2012] Off-axis axis estimate = 10.76'
[Mon Aug 20 12:43:13 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 12:43:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 12:43:13 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Mon Aug 20 12:43:13 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.016
[Mon Aug 20 12:43:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.81"
[Mon Aug 20 13:35:58 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 20 13:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src3.csv
[Mon Aug 20 13:35:58 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 20 13:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src3.csv
[Mon Aug 20 13:35:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 13:35:58 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 20 13:35:58 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 20 13:35:58 2012] Fit fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 20 14:48:41 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.815185 pixels away
[Mon Aug 20 14:48:41 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 14:48:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 14:48:41 2012] Assessing source extent using major
[Mon Aug 20 14:48:41 2012] Source does appear to be extended
[Mon Aug 20 14:48:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 16:40:58 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 16:40:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 20 16:40:58 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Mon Aug 20 16:40:58 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.016
[Mon Aug 20 16:40:58 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.81"
[Mon Aug 20 17:12:00 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_src3.ximg exists
[Mon Aug 20 17:12:00 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Aug 20 17:12:00 2012] Fit fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Aug 20 17:12:00 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Aug 20 17:12:00 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Aug 20 17:12:00 2012] Fit fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Aug 20 17:55:50 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.201351 pixels away
[Mon Aug 20 17:55:50 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 17:55:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 17:55:50 2012] Assessing source extent using major
[Mon Aug 20 17:55:50 2012] Source does appear to be extended
[Mon Aug 20 17:55:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 20:08:10 2012] XMMSAS src. selection expression = ellipse(36287.474274, 18222.331024, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 20 20:08:10 2012] Writing source region out to fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src3_src.reg
[Mon Aug 20 20:08:10 2012] Extracting stamp from image fullrun_mos1_xmm0101440601_pi300-10000_cl_sm2.00.img.gz, (380, 173) - (455, 248)
[Mon Aug 20 20:08:10 2012] XMMSAS bgd. selection expression = annulus(36287.474274, 18222.331024, 1087.500000, 2175.000000, X, Y)
[Mon Aug 20 20:08:10 2012] Writing fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src3.gif
[Mon Aug 20 20:14:27 2012] Mean detx,y = (5009.78, -12557.50) 
[Mon Aug 20 20:14:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 20:14:45 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 20:14:45 2012] Setting source spectrum file to fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Aug 20 20:14:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Aug 20 20:34:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 20 20:34:59 2012] rmf not generated due to insufficient counts
[Mon Aug 20 21:53:19 2012] Updating aperture counts using extracted products
[Mon Aug 20 21:53:19 2012] Error reading totcts from fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Aug 20 21:53:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 21:53:20 2012] Using photon index=1.80, rate=0.013, arf fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src3.arf
[Mon Aug 20 21:53:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 21:53:20 2012] Updating source flux to 3.2e-13
[Mon Aug 20 21:53:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting