[Mon Aug 20 10:33:44 2012] Detection parameters:
  Position = (283.7, 282.2) = 4 24 12.39 14 45 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22623.0 +/- 179.3
  Background counts = 12.9
  Rate = 0.5 +/- 0.004

[Mon Aug 20 10:33:45 2012] Off-axis axis estimate = 1.59'
[Mon Aug 20 12:43:13 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Mon Aug 20 12:43:13 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Mon Aug 20 12:43:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Mon Aug 20 12:43:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Mon Aug 20 13:35:58 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 20 13:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 13:35:58 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 20 13:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src1.csv
[Mon Aug 20 13:35:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 20 13:35:58 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 20 13:35:58 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 20 13:35:58 2012] Fit fullrun_mos1_xmm0101440601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 20 14:48:41 2012] Spatial fit model total counts = 19902.100000, observed total counts = 19907.000000
[Mon Aug 20 14:48:41 2012] Offset between fit and detection position for source 1 = 0.184771 pixels
[Mon Aug 20 14:48:41 2012] 19899.940000 total counts/ 4072.640000 bgd. counts: snr = 248.009789
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.184771 pixels
  Position = (283.7, 282.4) = 4 24 12.39 14 45 31.9
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 15827.3 +/- 141.1
  Background counts = 4072.6
  Rate = 0.4 +/- 0.003
[Mon Aug 20 14:48:41 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 14:48:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 14:48:41 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 14:48:41 2012] Source does appear to be extended
[Mon Aug 20 14:48:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 16:40:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 20 16:40:58 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Mon Aug 20 16:40:58 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.680
[Mon Aug 20 16:40:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.74"
[Mon Aug 20 17:12:00 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 20 17:12:00 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 20 17:12:00 2012] Fit fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Aug 20 17:12:00 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 20 17:12:00 2012] fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 20 17:12:00 2012] Fit fullrun_mos1_xmm0101440601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 20 17:55:50 2012] Spatial fit model total counts = 19884.300000, observed total counts = 19879.000000
[Mon Aug 20 17:55:50 2012] Offset between fit and detection position for source 1 = 0.015424 pixels
[Mon Aug 20 17:55:50 2012] 19958.210000 total counts/ 4208.310000 bgd. counts: snr = 242.786167
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015424 pixels
  Position = (283.7, 282.4) = 4 24 12.39 14 45 31.9
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 15749.9 +/- 141.3
  Background counts = 4208.3
  Rate = 0.4 +/- 0.003
[Mon Aug 20 17:55:50 2012] Vigneting correction estimate = 1.000000
[Mon Aug 20 17:55:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 20 17:55:50 2012] Assessing source extent using major axis lower bound
[Mon Aug 20 17:55:50 2012] Source does appear to be extended
[Mon Aug 20 17:55:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 20 20:08:10 2012] Counts = 15749.900000, rescaling region sizes by 3.000000
[Mon Aug 20 20:08:10 2012] XMMSAS src. selection expression = ellipse(24629.861600, 24520.336800, 1025.794830, 1025.794830, 0.000000, X, Y)
[Mon Aug 20 20:08:10 2012] Writing source region out to fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 20 20:08:10 2012] Extracting stamp from image fullrun_mos1_xmm0101440601_pi300-10000_cl_sm2.00.img.gz, (225, 223) - (343, 341)
[Mon Aug 20 20:08:10 2012] XMMSAS bgd. selection expression = annulus(24629.861600, 24520.336800, 5128.974148, 10257.948295, X, Y) && !ellipse(26865.008400, 15144.866200, 457.342413, 457.342413, 0.000000, X, Y) && !ellipse(17773.295212, 21243.633560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22231.250780, 17388.541600, 575.220017, 575.220017, 0.000000, X, Y) && !ellipse(21443.829407, 20499.662491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30756.493347, 25332.905701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24387.893860, 30107.997400, 396.372811, 396.372811, 0.000000, X, Y) && !ellipse(29618.728333, 27172.025909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23865.416080, 17841.815000, 517.785615, 517.785615, 0.000000, X, Y) && !ellipse(28685.081800, 15833.842400, 838.208024, 838.208024, 0.000000, X, Y) && !ellipse(25631.309753, 21998.072083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16371.198135, 14195.858292, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 20 20:08:10 2012] Writing fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1.gif
[Mon Aug 20 20:08:18 2012] Mean detx,y = (133.63, -257.31) 
[Mon Aug 20 20:08:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 20 20:13:34 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 20 20:13:34 2012] Setting source spectrum file to fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 20:13:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 20 21:53:18 2012] Updating aperture counts using extracted products
[Mon Aug 20 21:53:19 2012] Error reading totcts from fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 20 21:53:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 21:53:20 2012] Using photon index=1.80, rate=0.366, arf fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 21:53:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 21:53:20 2012] Updating source flux to 3.4e-12
[Mon Aug 20 21:54:59 2012] Reading fit data from xmm0101440601/analysis//spectral/fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Aug 20 21:54:59 2012] Spectral fit parameter nH value = 4.11855e+21
[Mon Aug 20 21:54:59 2012] Spectral fit parameter PhoIndex value = 5.09408
[Mon Aug 20 21:54:59 2012] Failed to get F(0.3-8.0) from xmm0101440601/analysis//spectral/fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Aug 20 21:54:59 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 20 21:54:59 2012] Using Nh = 4.1e+21, photon index=5.09, rate=0.366, arf fullrun_mos1_xmm0101440601_pi300-10000_pass1_cl_src1.arf
[Mon Aug 20 21:54:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 20 21:54:59 2012] Updating source flux to 2.1e-12