[Thu May 23 00:26:46 2013] Detection parameters:
  Position = (285.0, 297.8) = 4 28 34.23 15 58 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.2 +/- 27.6
  Background counts = 37.5
  Rate = 0.007 +/- 0.0007

[Thu May 23 00:26:47 2013] Off-axis axis estimate = 0.98'
[Thu May 23 00:27:12 2013] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:27:12 2013] Initial guess for spatial extent in simple fitting = 6.92"
[Thu May 23 00:27:12 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.915
[Thu May 23 00:27:12 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 6.92"
[Thu May 23 00:27:14 2013] fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_src44.ximg exists
[Thu May 23 00:27:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_src44.csv
[Thu May 23 00:27:14 2013] fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_src44_1.ximg exists
[Thu May 23 00:27:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_src44.csv
[Thu May 23 00:27:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:27:16 2013] fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Thu May 23 00:27:16 2013] fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Thu May 23 00:27:16 2013] Fit fullrun_pn_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Thu May 23 00:27:31 2013] Spatial fit model total counts = 2545.780000, observed total counts = 2545.000000
[Thu May 23 00:27:31 2013] Offset between fit and detection position for source 48 = 5.261954 pixels
[Thu May 23 00:27:31 2013] 2487.440000 total counts/ 1819.970000 bgd. counts: snr = 15.645867
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 5.261954 pixels
  Position = (284.1, 292.6) = 4 28 34.47 15 58 26.5
  Extent = 13.3 (12.2-13.8)", rotation angle = 0
  Source counts = 667.5 +/- 49.9
  Background counts = 1820.0
  Rate = 0.02 +/- 0.001
[Thu May 23 00:27:32 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:27:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:27:32 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:27:32 2013] Source does appear to be extended
[Thu May 23 00:27:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:27:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 00:27:51 2013] Initial guess for spatial extent in simple fitting = 13.28"
[Thu May 23 00:27:51 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.970
[Thu May 23 00:27:51 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 13.28"
[Thu May 23 00:27:52 2013] fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_src37.ximg exists
[Thu May 23 00:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_src37.csv
[Thu May 23 00:27:52 2013] fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu May 23 00:27:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_src37.csv
[Thu May 23 00:27:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:27:53 2013] fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu May 23 00:27:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May 23 00:27:54 2013] fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu May 23 00:27:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May 23 00:27:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:28:07 2013] Warning, spatial fit 37 centroid is now closest to src. 50
[Thu May 23 00:28:07 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:28:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:28:07 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:28:07 2013] Source does appear to be extended
[Thu May 23 00:28:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:28:25 2013] XMMSAS src. selection expression = ellipse(24671.093000, 25411.076000, 796.806023, 796.806023, 0.000000, X, Y)
[Thu May 23 00:28:25 2013] Not overwriting source region fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_src.reg
[Thu May 23 00:28:25 2013] Extracting stamp from image fullrun_pn_xmm0101440501_pi300-10000_cl_sm2.00.img.gz, (238, 247) - (330, 338)
[Thu May 23 00:28:25 2013] XMMSAS bgd. selection expression = annulus(24671.093000, 25411.076000, 1328.010038, 2656.020076, X, Y) && !ellipse(24662.885880, 24570.115200, 1462.281642, 1462.281642, 0.000000, X, Y) && !ellipse(25156.089508, 28689.884596, 1117.344032, 364.910927, 102.918270, X, Y) && !ellipse(25110.275920, 28408.583600, 1197.432034, 419.736012, 280.815000, X, Y) && !ellipse(25016.108048, 27602.083809, 1139.072033, 323.038991, 103.406209, X, Y) && !ellipse(24963.772000, 27262.832000, 1117.344032, 1117.344032, 0.000000, X, Y) && !ellipse(24972.996311, 27306.341150, 1117.344032, 531.707226, 98.025502, X, Y) && !ellipse(23027.934052, 25081.893921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24736.957825, 22989.967133, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 00:28:25 2013] Writing fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48.gif
[Thu May 23 00:28:33 2013] ../../xmm0101440501/products/events/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_src.evt and ../../xmm0101440501/products/events/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_bgd.evt exist, delete to re-create
[Thu May 23 00:28:34 2013] Mean detx,y = (42.43, 234.18) 
[Thu May 23 00:28:34 2013] ../../xmm0101440501/products/images/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_src.img and ../../xmm0101440501/products/images/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_bgd.img exist, delete to re-create
[Thu May 23 00:28:34 2013] ../../xmm0101440501/products/spectra/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_src_b10.pi.gz and ../../xmm0101440501/products/spectra/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_bgd.pi exist, delete to re-create
[Thu May 23 00:28:34 2013] Setting source spectrum file to fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu May 23 00:28:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu May 23 00:28:34 2013] ../../xmm0101440501/products/lightcurves/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_src.lc and ../../xmm0101440501/products/lightcurves/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_bgd.lc exist, delete to re-create
[Thu May 23 00:28:44 2013] fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48.rmf exists, delete to re-create
[Thu May 23 00:28:44 2013] fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48.arf exists, delete to re-create
[Thu May 23 00:51:24 2013] Updating aperture counts using extracted products
[Thu May 23 00:51:24 2013] Total counts from fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 24918.00
[Thu May 23 00:51:24 2013] Total counts from fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_bgd.pi.gz = 2209.00
[Thu May 23 00:51:24 2013] Got source and background scale factors 1996800.000000, 7370013.000000
[Thu May 23 00:51:24 2013] User source parameters:
  Position = (284.1, 292.6) = 4 28 34.47 15 58 26.5
  Extent = 13.3 (12.2-13.8)", rotation angle = 0
  Source aperture counts = 24319.5 +/- 158.9
  Background aperture counts = 598.5
  Rate = 0.6 +/- 0.004

[Thu May 23 00:51:34 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 00:51:34 2013] Using photon index=1.80, rate=0.0157, arf fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48.arf
[Thu May 23 00:51:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 00:51:35 2013] Updating source flux to 6e-14
[Thu May 23 00:52:34 2013] xmm0101440501/analysis//spectral/fullrun_pn_xmm0101440501_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete