[Thu May 23 00:26:49 2013] Detection parameters:
  Position = (285.5, 298.3) = 4 28 34.06 15 58 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.6 +/- 13.0
  Background counts = 10.0
  Rate = 0.001 +/- 0.0003

[Thu May 23 00:26:49 2013] Off-axis axis estimate = 0.94'
[Thu May 23 00:27:17 2013] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:27:17 2013] Initial guess for spatial extent in simple fitting = 6.90"
[Thu May 23 00:27:17 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Thu May 23 00:27:17 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 6.90"
[Thu May 23 00:27:17 2013] fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_src19.ximg exists
[Thu May 23 00:27:17 2013] fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May 23 00:27:17 2013] Fit fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_src19 appears to have run properly
[Thu May 23 00:27:18 2013] fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May 23 00:27:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu May 23 00:27:18 2013] fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May 23 00:27:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu May 23 00:27:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:27:40 2013] Spatial fit model total counts = 536.424000, observed total counts = 510.000000
[Thu May 23 00:27:40 2013] Offset between fit and detection position for source 20 = 1.428128 pixels
[Thu May 23 00:27:40 2013] 507.860500 total counts/ 465.805000 bgd. counts: snr = 1.948591
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.428128 pixels
  Position = (284.2, 299.0) = 4 28 34.44 15 58 54.0
  Extent = 9.3" x 9.3", rotation angle = 0
  Source counts = 42.1 +/- 22.5
  Background counts = 465.8
  Rate = 0.001 +/- 0.0006
[Thu May 23 00:27:40 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:27:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:27:40 2013] Assessing source extent using major
[Thu May 23 00:27:40 2013] Source does appear to be extended
[Thu May 23 00:27:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:27:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 00:27:55 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Thu May 23 00:27:55 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.072
[Thu May 23 00:27:55 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.33"
[Thu May 23 00:27:55 2013] fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_src18.ximg exists
[Thu May 23 00:27:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_src18.csv
[Thu May 23 00:27:55 2013] fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu May 23 00:27:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_src18.csv
[Thu May 23 00:27:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:27:56 2013] fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu May 23 00:27:56 2013] fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu May 23 00:27:56 2013] Fit fullrun_mos2_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu May 23 00:28:14 2013] Warning, spatial fit 18 centroid is now closest to src. 22
[Thu May 23 00:28:14 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:28:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:28:14 2013] Assessing source extent using major
[Thu May 23 00:28:14 2013] Source does appear to be extended
[Thu May 23 00:28:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:28:46 2013] XMMSAS src. selection expression = ellipse(24680.826400, 25961.422780, 559.840216, 559.840216, 0.000000, X, Y)
[Thu May 23 00:28:46 2013] Not overwriting source region fullrun_mos2_xmm0101440501_pi300-10000_pass1_cl_src20_src.reg
[Thu May 23 00:28:46 2013] Extracting stamp from image fullrun_mos2_xmm0101440501_pi300-10000_cl_sm2.00.img.gz, (252, 267) - (316, 331)
[Thu May 23 00:28:46 2013] XMMSAS bgd. selection expression = annulus(24680.826400, 25961.422780, 933.067027, 1866.134054, X, Y) && !ellipse(24638.156800, 24582.343400, 1164.451234, 1164.451234, 0.000000, X, Y) && !ellipse(23731.522125, 24063.995514, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 00:28:46 2013] Writing fullrun_mos2_xmm0101440501_pi300-10000_pass1_cl_src20.gif
[Thu May 23 00:31:07 2013] Mean detx,y = (-4.77, -1338.08) 
[Thu May 23 00:31:08 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 00:31:16 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 00:31:16 2013] Setting source spectrum file to fullrun_mos2_xmm0101440501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu May 23 00:31:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu May 23 00:49:25 2013] Not generating rmf since there are only 42 counts
[Thu May 23 00:49:25 2013] rmf not generated due to insufficient counts
[Thu May 23 00:51:46 2013] Updating aperture counts using extracted products
[Thu May 23 00:51:46 2013] Total counts from fullrun_mos2_xmm0101440501_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 252.00
[Thu May 23 00:51:46 2013] Total counts from fullrun_mos2_xmm0101440501_pi300-10000_pass1_cl_src20_bgd.pi.gz = 704.00
[Thu May 23 00:51:46 2013] Got source and background scale factors 872008.000000, 5750616.000000
[Thu May 23 00:51:46 2013] User source parameters:
  Position = (284.2, 299.0) = 4 28 34.44 15 58 54.0
  Extent = 9.3" x 9.3", rotation angle = 0
  Source aperture counts = 145.2 +/- 16.9
  Background aperture counts = 106.8
  Rate = 0.004 +/- 0.0004

[Thu May 23 00:51:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 00:51:48 2013] Using photon index=1.80, rate=0.00105, arf fullrun_mos2_xmm0101440501_pi300-10000_pass1_cl_src20.arf
[Thu May 23 00:51:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 00:51:48 2013] Updating source flux to 1.5e-14
[Thu May 23 00:52:03 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 23 00:52:08 2013] xmm0101440501/analysis//spectral/fullrun_mos2_xmm0101440501_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete