[Thu May 23 00:26:48 2013] Detection parameters:
  Position = (230.6, 451.3) = 4 28 50.64 16 9 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 260.1 +/- 18.6
  Background counts = 7.1
  Rate = 0.006 +/- 0.0005

[Thu May 23 00:26:48 2013] Off-axis axis estimate = 12.12'
[Thu May 23 00:27:16 2013] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:27:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 00:27:16 2013] Initial guess for spatial extent in simple fitting = 12.49"
[Thu May 23 00:27:16 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.078
[Thu May 23 00:27:16 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 12.49"
[Thu May 23 00:27:16 2013] fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 23 00:27:16 2013] fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 23 00:27:16 2013] Fit fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_src4 appears to have run properly
[Thu May 23 00:27:17 2013] fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 23 00:27:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 23 00:27:17 2013] fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 23 00:27:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 23 00:27:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:27:35 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.464797 pixels away
[Thu May 23 00:27:35 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:27:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:27:35 2013] Assessing source extent using major
[Thu May 23 00:27:35 2013] Source does appear to be extended
[Thu May 23 00:27:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:27:54 2013] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:27:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 00:27:54 2013] Initial guess for spatial extent in simple fitting = 12.49"
[Thu May 23 00:27:54 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.078
[Thu May 23 00:27:54 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 12.49"
[Thu May 23 00:27:54 2013] fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 23 00:27:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_src4.csv
[Thu May 23 00:27:54 2013] fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 23 00:27:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_src4.csv
[Thu May 23 00:27:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:27:54 2013] fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 23 00:27:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 23 00:27:54 2013] fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 23 00:27:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 23 00:27:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:28:10 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.460959 pixels away
[Thu May 23 00:28:10 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:28:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:28:10 2013] Assessing source extent using major
[Thu May 23 00:28:10 2013] Source does appear to be extended
[Thu May 23 00:28:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:28:44 2013] XMMSAS src. selection expression = ellipse(20014.520935, 39210.900482, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 00:28:44 2013] Not overwriting source region fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_src.reg
[Thu May 23 00:28:44 2013] Extracting stamp from image fullrun_mos1_xmm0101440501_pi300-10000_cl_sm2.00.img.gz, (193, 414) - (268, 489)
[Thu May 23 00:28:44 2013] XMMSAS bgd. selection expression = annulus(20014.520935, 39210.900482, 1087.500000, 2175.000000, X, Y) && !ellipse(17132.295471, 38510.017883, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 00:28:44 2013] Writing fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21.gif
[Thu May 23 00:28:45 2013] ../../xmm0101440501/products/events/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0101440501/products/events/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Thu May 23 00:28:45 2013] Mean detx,y = (-13892.18, 6079.16) 
[Thu May 23 00:28:45 2013] ../../xmm0101440501/products/images/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_src.img and ../../xmm0101440501/products/images/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Thu May 23 00:28:45 2013] ../../xmm0101440501/products/spectra/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0101440501/products/spectra/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Thu May 23 00:28:45 2013] Setting source spectrum file to fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu May 23 00:28:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu May 23 00:28:45 2013] ../../xmm0101440501/products/lightcurves/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0101440501/products/lightcurves/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Thu May 23 00:28:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 23 00:28:46 2013] rmf not generated due to insufficient counts
[Thu May 23 00:28:46 2013] fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Thu May 23 00:51:36 2013] Updating aperture counts using extracted products
[Thu May 23 00:51:36 2013] Total counts from fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 261.00
[Thu May 23 00:51:37 2013] Total counts from fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_bgd.pi.gz = 289.00
[Thu May 23 00:51:37 2013] Got source and background scale factors 1074492.000000, 7067704.000000
[Thu May 23 00:51:37 2013] User source parameters:
  Position = (230.6, 451.3) = 4 28 50.64 16 9 58.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 217.1 +/- 17.2
  Background aperture counts = 43.9
  Rate = 0.005 +/- 0.0004

[Thu May 23 00:51:37 2013] Updating counts from extracted products
[Thu May 23 00:51:37 2013] Set source signif. to 217.06/6.63 = 32.75
[Thu May 23 00:51:39 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 00:51:39 2013] Using photon index=1.80, rate=0.00541, arf fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21.arf
[Thu May 23 00:51:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 00:51:40 2013] Updating source flux to 1.7e-13
[Thu May 23 00:51:52 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 00:52:03 2013] xmm0101440501/analysis//spectral/fullrun_mos1_xmm0101440501_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete