[Mon May 13 15:59:54 2013] Detection parameters:
  Position = (266.1, 206.0) = 8 40 5.44 19 27 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.1 +/- 15.4
  Background counts = 50.7
  Rate = 0.004 +/- 0.0005

[Mon May 13 15:59:54 2013] Off-axis axis estimate = 7.10'
[Mon May 13 16:00:39 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:39 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Mon May 13 16:00:39 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.153
[Mon May 13 16:00:39 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 9.98"
[Mon May 13 16:00:41 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src72.ximg exists
[Mon May 13 16:00:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src72.csv
[Mon May 13 16:00:41 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src72_1.ximg exists
[Mon May 13 16:00:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src72.csv
[Mon May 13 16:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:43 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Mon May 13 16:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon May 13 16:00:43 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Mon May 13 16:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon May 13 16:00:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:03 2013] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 13.798557 pixels away
[Mon May 13 16:01:03 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:03 2013] Assessing source extent using major
[Mon May 13 16:01:03 2013] Source does appear to be extended
[Mon May 13 16:01:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:46 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:46 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Mon May 13 16:01:46 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.153
[Mon May 13 16:01:46 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 9.98"
[Mon May 13 16:01:47 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src71.ximg exists
[Mon May 13 16:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src71.csv
[Mon May 13 16:01:47 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src71_1.ximg exists
[Mon May 13 16:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src71.csv
[Mon May 13 16:01:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:49 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Mon May 13 16:01:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src71.csv
[Mon May 13 16:01:49 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Mon May 13 16:01:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src71.csv
[Mon May 13 16:01:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:02:12 2013] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 14.432144 pixels away
[Mon May 13 16:02:12 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:12 2013] Assessing source extent using major
[Mon May 13 16:02:12 2013] Source does appear to be extended
[Mon May 13 16:02:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:02:55 2013] XMMSAS src. selection expression = ellipse(23103.931610, 17871.656082, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 16:02:55 2013] Not overwriting source region fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_src.reg
[Mon May 13 16:02:55 2013] Extracting stamp from image fullrun_pn_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (229, 168) - (304, 243)
[Mon May 13 16:02:55 2013] XMMSAS bgd. selection expression = annulus(23103.931610, 17871.656082, 1087.500000, 2175.000000, X, Y) && !ellipse(21048.039800, 18810.653020, 882.576025, 882.576025, 0.000000, X, Y) && !ellipse(25958.072174, 16032.942093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21000.071793, 15595.409195, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 16:02:55 2013] Writing fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74.gif
[Mon May 13 16:03:08 2013] ../../xmm0101440401/products/events/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_src.evt and ../../xmm0101440401/products/events/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_bgd.evt exist, delete to re-create
[Mon May 13 16:03:08 2013] Mean detx,y = (3932.18, -5476.29) 
[Mon May 13 16:03:08 2013] ../../xmm0101440401/products/images/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_src.img and ../../xmm0101440401/products/images/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_bgd.img exist, delete to re-create
[Mon May 13 16:03:08 2013] ../../xmm0101440401/products/spectra/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_src_b10.pi.gz and ../../xmm0101440401/products/spectra/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_bgd.pi exist, delete to re-create
[Mon May 13 16:03:08 2013] Setting source spectrum file to fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Mon May 13 16:03:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Mon May 13 16:03:08 2013] ../../xmm0101440401/products/lightcurves/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_src.lc and ../../xmm0101440401/products/lightcurves/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_bgd.lc exist, delete to re-create
[Mon May 13 16:03:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 16:03:21 2013] rmf not generated due to insufficient counts
[Mon May 13 16:03:21 2013] fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74.arf exists, delete to re-create
[Mon May 13 16:45:00 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:00 2013] Total counts from fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_src_b10.pi.gz = 389.00
[Mon May 13 16:45:00 2013] Total counts from fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_bgd.pi.gz = 2056.00
[Mon May 13 16:45:00 2013] Got source and background scale factors 1331532.000000, 9475683.000000
[Mon May 13 16:45:00 2013] User source parameters:
  Position = (266.1, 206.0) = 8 40 5.44 19 27 23.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 100.1 +/- 20.7
  Background aperture counts = 288.9
  Rate = 0.002 +/- 0.0005

[Mon May 13 16:45:00 2013] Updating counts from extracted products
[Mon May 13 16:45:00 2013] Set source signif. to 100.09/17.00 = 5.89
[Mon May 13 16:45:11 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:11 2013] Using photon index=1.80, rate=0.00237, arf fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74.arf
[Mon May 13 16:45:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:11 2013] Updating source flux to 8.8e-15
[Mon May 13 16:45:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:45:53 2013] xmm0101440401/analysis//spectral/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src74_pl.csv not found, spectral fit skipped or did not complete