[Mon May 13 15:59:53 2013] Detection parameters:
  Position = (316.1, 258.1) = 8 39 50.07 19 31 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.4 +/- 16.3
  Background counts = 50.6
  Rate = 0.003 +/- 0.0005

[Mon May 13 15:59:54 2013] Off-axis axis estimate = 3.19'
[Mon May 13 16:00:39 2013] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:39 2013] Initial guess for spatial extent in simple fitting = 8.02"
[Mon May 13 16:00:39 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.728
[Mon May 13 16:00:39 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 8.02"
[Mon May 13 16:00:41 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src61.ximg exists
[Mon May 13 16:00:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src61.csv
[Mon May 13 16:00:41 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src61_1.ximg exists
[Mon May 13 16:00:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src61.csv
[Mon May 13 16:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:42 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Mon May 13 16:00:42 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Mon May 13 16:00:42 2013] Fit fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Mon May 13 16:01:03 2013] Spatial fit model total counts = 626.915000, observed total counts = 573.000000
[Mon May 13 16:01:03 2013] Offset between fit and detection position for source 63 = 0.055737 pixels
[Mon May 13 16:01:03 2013] 632.876500 total counts/ 574.759000 bgd. counts: snr = 2.424175
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.055737 pixels
  Position = (316.1, 258.2) = 8 39 50.06 19 31 10.0
  Extent = 3.4 (2.3-5.4)", rotation angle = 0
  Source counts = 58.1 +/- 25.2
  Background counts = 574.8
  Rate = 0.001 +/- 0.0006
[Mon May 13 16:01:03 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:03 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:01:03 2013] Source does appear to be extended
[Mon May 13 16:01:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:46 2013] Initial guess for spatial extent in simple fitting = 3.40"
[Mon May 13 16:01:46 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.610
[Mon May 13 16:01:46 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 3.40"
[Mon May 13 16:01:47 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src60.ximg exists
[Mon May 13 16:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src60.csv
[Mon May 13 16:01:47 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src60_1.ximg exists
[Mon May 13 16:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src60.csv
[Mon May 13 16:01:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:48 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Mon May 13 16:01:48 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Mon May 13 16:01:48 2013] Fit fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Mon May 13 16:02:12 2013] Spatial fit model total counts = 624.236000, observed total counts = 573.000000
[Mon May 13 16:02:12 2013] Offset between fit and detection position for source 63 = 0.021744 pixels
[Mon May 13 16:02:12 2013] 630.203200 total counts/ 573.377000 bgd. counts: snr = 2.373168
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.021744 pixels
  Position = (316.1, 258.1) = 8 39 50.07 19 31 9.9
  Extent = 3.5 (2.3-5.4)", rotation angle = 0
  Source counts = 56.8 +/- 25.1
  Background counts = 573.4
  Rate = 0.001 +/- 0.0006
[Mon May 13 16:02:12 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:12 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:02:12 2013] Source does appear to be extended
[Mon May 13 16:02:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:02:55 2013] XMMSAS src. selection expression = ellipse(27451.223920, 22409.703200, 211.063806, 211.063806, 0.000000, X, Y)
[Mon May 13 16:02:55 2013] Not overwriting source region fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_src.reg
[Mon May 13 16:02:55 2013] Extracting stamp from image fullrun_pn_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (304, 246) - (328, 270)
[Mon May 13 16:02:55 2013] XMMSAS bgd. selection expression = annulus(27451.223920, 22409.703200, 351.773010, 703.546020, X, Y) && !ellipse(27692.560333, 23299.601959, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 16:02:55 2013] Writing fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63.gif
[Mon May 13 16:03:07 2013] ../../xmm0101440401/products/events/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_src.evt and ../../xmm0101440401/products/events/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_bgd.evt exist, delete to re-create
[Mon May 13 16:03:07 2013] Mean detx,y = (-1524.97, -2336.10) 
[Mon May 13 16:03:07 2013] ../../xmm0101440401/products/images/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_src.img and ../../xmm0101440401/products/images/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_bgd.img exist, delete to re-create
[Mon May 13 16:03:07 2013] ../../xmm0101440401/products/spectra/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_src_b10.pi.gz and ../../xmm0101440401/products/spectra/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_bgd.pi exist, delete to re-create
[Mon May 13 16:03:07 2013] Setting source spectrum file to fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon May 13 16:03:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Mon May 13 16:03:07 2013] ../../xmm0101440401/products/lightcurves/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_src.lc and ../../xmm0101440401/products/lightcurves/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_bgd.lc exist, delete to re-create
[Mon May 13 16:03:21 2013] Not generating rmf since there are only 56 counts
[Mon May 13 16:03:21 2013] rmf not generated due to insufficient counts
[Mon May 13 16:03:21 2013] fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63.arf exists, delete to re-create
[Mon May 13 16:44:58 2013] Updating aperture counts using extracted products
[Mon May 13 16:44:58 2013] Total counts from fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 102.00
[Mon May 13 16:44:58 2013] Total counts from fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_bgd.pi.gz = 177.00
[Mon May 13 16:44:58 2013] Got source and background scale factors 140800.000000, 689941.000000
[Mon May 13 16:44:58 2013] User source parameters:
  Position = (316.1, 258.1) = 8 39 50.07 19 31 9.9
  Extent = 3.5 (2.3-5.4)", rotation angle = 0
  Source aperture counts = 65.9 +/- 11.1
  Background aperture counts = 36.1
  Rate = 0.002 +/- 0.0003

[Mon May 13 16:45:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:10 2013] Using photon index=1.80, rate=0.00134, arf fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63.arf
[Mon May 13 16:45:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:10 2013] Updating source flux to 6.5e-15
[Mon May 13 16:45:42 2013] Source 63 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:45:53 2013] xmm0101440401/analysis//spectral/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete