[Mon May 13 15:59:53 2013] Detection parameters:
  Position = (129.6, 279.0) = 8 40 47.45 19 32 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.5 +/- 15.1
  Background counts = 39.6
  Rate = 0.003 +/- 0.0004

[Mon May 13 15:59:54 2013] Off-axis axis estimate = 12.32'
[Mon May 13 16:00:39 2013] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:39 2013] Initial guess for spatial extent in simple fitting = 12.59"
[Mon May 13 16:00:39 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.846
[Mon May 13 16:00:39 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 12.59"
[Mon May 13 16:00:41 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src56.ximg exists
[Mon May 13 16:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src56.csv
[Mon May 13 16:00:41 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src56_1.ximg exists
[Mon May 13 16:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src56.csv
[Mon May 13 16:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:42 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Mon May 13 16:00:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Mon May 13 16:00:42 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Mon May 13 16:00:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Mon May 13 16:00:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:03 2013] Spatial fit model total counts = 561.503000, observed total counts = 421.000000
[Mon May 13 16:01:03 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 16:01:03 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:03 2013] Assessing source extent using major
[Mon May 13 16:01:03 2013] Source does appear to be extended
[Mon May 13 16:01:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:46 2013] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:46 2013] Initial guess for spatial extent in simple fitting = 12.59"
[Mon May 13 16:01:46 2013] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.846
[Mon May 13 16:01:46 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 12.59"
[Mon May 13 16:01:47 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src55.ximg exists
[Mon May 13 16:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src55.csv
[Mon May 13 16:01:47 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src55_1.ximg exists
[Mon May 13 16:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src55.csv
[Mon May 13 16:01:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:48 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Mon May 13 16:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Mon May 13 16:01:48 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Mon May 13 16:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src55.csv
[Mon May 13 16:01:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:02:12 2013] Spatial fit model total counts = 590.962000, observed total counts = 421.000000
[Mon May 13 16:02:12 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 16:02:12 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:12 2013] Assessing source extent using major
[Mon May 13 16:02:12 2013] Source does appear to be extended
[Mon May 13 16:02:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:02:54 2013] XMMSAS src. selection expression = ellipse(11227.426682, 24223.026459, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 16:02:54 2013] Not overwriting source region fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_src.reg
[Mon May 13 16:02:54 2013] Extracting stamp from image fullrun_pn_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (92, 241) - (167, 316)
[Mon May 13 16:02:54 2013] XMMSAS bgd. selection expression = annulus(11227.426682, 24223.026459, 1087.500000, 2175.000000, X, Y) && !ellipse(12631.674332, 25800.796204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12676.473969, 21518.472900, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 16:02:54 2013] Writing fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58.gif
[Mon May 13 16:03:06 2013] ../../xmm0101440401/products/events/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_src.evt and ../../xmm0101440401/products/events/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_bgd.evt exist, delete to re-create
[Mon May 13 16:03:06 2013] Mean detx,y = (13418.99, 4059.13) 
[Mon May 13 16:03:06 2013] ../../xmm0101440401/products/images/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_src.img and ../../xmm0101440401/products/images/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_bgd.img exist, delete to re-create
[Mon May 13 16:03:06 2013] ../../xmm0101440401/products/spectra/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_src_b10.pi.gz and ../../xmm0101440401/products/spectra/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_bgd.pi exist, delete to re-create
[Mon May 13 16:03:06 2013] Setting source spectrum file to fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon May 13 16:03:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Mon May 13 16:03:06 2013] ../../xmm0101440401/products/lightcurves/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_src.lc and ../../xmm0101440401/products/lightcurves/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_bgd.lc exist, delete to re-create
[Mon May 13 16:03:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 16:03:21 2013] rmf not generated due to insufficient counts
[Mon May 13 16:03:21 2013] fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58.arf exists, delete to re-create
[Mon May 13 16:44:57 2013] Updating aperture counts using extracted products
[Mon May 13 16:44:57 2013] Total counts from fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 287.00
[Mon May 13 16:44:57 2013] Total counts from fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_bgd.pi.gz = 959.00
[Mon May 13 16:44:57 2013] Got source and background scale factors 1088336.000000, 4971604.000000
[Mon May 13 16:44:57 2013] User source parameters:
  Position = (129.6, 279.0) = 8 40 47.45 19 32 40.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 77.1 +/- 18.0
  Background aperture counts = 209.9
  Rate = 0.002 +/- 0.0004

[Mon May 13 16:44:57 2013] Updating counts from extracted products
[Mon May 13 16:44:57 2013] Set source signif. to 77.06/14.49 = 5.32
[Mon May 13 16:45:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:10 2013] Using photon index=1.80, rate=0.00182, arf fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58.arf
[Mon May 13 16:45:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:10 2013] Updating source flux to 1.2e-14
[Mon May 13 16:45:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:45:53 2013] xmm0101440401/analysis//spectral/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete