[Mon May 13 15:59:51 2013] Detection parameters:
  Position = (456.3, 129.9) = 8 39 6.98 19 21 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1699.5 +/- 46.8
  Background counts = 33.6
  Rate = 0.04 +/- 0.001

[Mon May 13 15:59:54 2013] Off-axis axis estimate = 16.74'
[Mon May 13 16:00:39 2013] Using EEF radius (= 14.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 16:00:39 2013] Initial guess for spatial extent in simple fitting = 14.80"
[Mon May 13 16:00:39 2013] source mask rpix=3.4, npix_max = 60, mask sum = 47, frac = 0.772
[Mon May 13 16:00:39 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 14.80"
[Mon May 13 16:00:40 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 13 16:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src1.csv
[Mon May 13 16:00:40 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 13 16:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src1.csv
[Mon May 13 16:00:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:41 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 16:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 16:00:41 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 16:00:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 13 16:00:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:03 2013] Spatial fit model total counts = 12815.700000, observed total counts = 2231.000000
[Mon May 13 16:01:03 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 16:01:03 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:03 2013] Assessing source extent using major
[Mon May 13 16:01:03 2013] Source does appear to be extended
[Mon May 13 16:01:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:46 2013] Using EEF radius (= 14.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 16:01:46 2013] Initial guess for spatial extent in simple fitting = 14.80"
[Mon May 13 16:01:46 2013] source mask rpix=3.4, npix_max = 60, mask sum = 47, frac = 0.772
[Mon May 13 16:01:46 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.80"
[Mon May 13 16:01:46 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 13 16:01:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src1.csv
[Mon May 13 16:01:46 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 13 16:01:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src1.csv
[Mon May 13 16:01:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:47 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 16:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 16:01:47 2013] fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 16:01:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 13 16:01:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:02:11 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.712333 pixels away
[Mon May 13 16:02:12 2013] Spatial fit model total counts = 1340.460000, observed total counts = 1128.000000
[Mon May 13 16:02:12 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 16:02:12 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:12 2013] Assessing source extent using major
[Mon May 13 16:02:12 2013] Source does appear to be extended
[Mon May 13 16:02:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:02:53 2013] Counts = 1699.512695, rescaling region sizes by 2.000000
[Mon May 13 16:02:53 2013] XMMSAS src. selection expression = ellipse(39648.356384, 11249.397049, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 13 16:02:53 2013] Not overwriting source region fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_src.reg
[Mon May 13 16:02:53 2013] Extracting stamp from image fullrun_pn_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (381, 55) - (531, 205)
[Mon May 13 16:02:53 2013] XMMSAS bgd. selection expression = annulus(39648.356384, 11249.397049, 4350.000000, 8700.000000, X, Y) && !ellipse(34524.757843, 18120.938110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34850.232574, 20665.242065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33482.427856, 19173.491287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33168.053802, 18101.063889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33404.117767, 17461.477951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32636.551453, 14213.451843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40678.712189, 13880.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40770.403625, 12626.493042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32959.220400, 12034.803140, 481.862414, 481.862414, 0.000000, X, Y)
[Mon May 13 16:02:53 2013] Writing fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1.gif
[Mon May 13 16:02:56 2013] ../../xmm0101440401/products/events/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0101440401/products/events/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon May 13 16:02:56 2013] Mean detx,y = (-10044.61, -16339.08) 
[Mon May 13 16:02:56 2013] ../../xmm0101440401/products/images/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0101440401/products/images/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon May 13 16:02:56 2013] ../../xmm0101440401/products/spectra/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0101440401/products/spectra/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon May 13 16:02:56 2013] Setting source spectrum file to fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 13 16:02:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 13 16:02:56 2013] ../../xmm0101440401/products/lightcurves/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0101440401/products/lightcurves/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon May 13 16:03:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 16:03:21 2013] rmf not generated due to insufficient counts
[Mon May 13 16:03:21 2013] fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Mon May 13 16:44:47 2013] Updating aperture counts using extracted products
[Mon May 13 16:44:47 2013] Total counts from fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2177.00
[Mon May 13 16:44:47 2013] Total counts from fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 11218.00
[Mon May 13 16:44:47 2013] Got source and background scale factors 1148628.000000, 52644252.000000
[Mon May 13 16:44:47 2013] User source parameters:
  Position = (456.3, 129.9) = 8 39 6.98 19 21 48.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1932.2 +/- 47.7
  Background aperture counts = 244.8
  Rate = 0.05 +/- 0.001

[Mon May 13 16:44:47 2013] Updating counts from extracted products
[Mon May 13 16:44:47 2013] Set source signif. to 1932.24/15.64 = 123.51
[Mon May 13 16:45:05 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:05 2013] Using photon index=1.80, rate=0.0457, arf fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1.arf
[Mon May 13 16:45:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:06 2013] Updating source flux to 4.9e-13
[Mon May 13 16:45:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:45:53 2013] xmm0101440401/analysis//spectral/fullrun_pn_xmm0101440401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete