[Mon May 13 15:59:59 2013] Detection parameters:
  Position = (270.7, 477.2) = 8 40 4.05 19 47 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.5 +/- 8.1
  Background counts = 7.2
  Rate = 0.0009 +/- 0.0002

[Mon May 13 15:59:59 2013] Off-axis axis estimate = 13.11'
[Mon May 13 16:00:45 2013] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:45 2013] Initial guess for spatial extent in simple fitting = 12.98"
[Mon May 13 16:00:45 2013] source mask rpix=3.0, npix_max = 48, mask sum = 34, frac = 0.700
[Mon May 13 16:00:45 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 12.98"
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src53.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src53.csv
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src53_1.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src53.csv
[Mon May 13 16:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src53.csv
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src53.csv
[Mon May 13 16:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:25 2013] Warning, spatial fit 53 centroid is now closest to src. 14
[Mon May 13 16:01:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:25 2013] Assessing source extent using major
[Mon May 13 16:01:25 2013] Source does appear to be extended
[Mon May 13 16:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:25 2013] Source is confused with source 14
[Mon May 13 16:01:51 2013] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:51 2013] Initial guess for spatial extent in simple fitting = 12.98"
[Mon May 13 16:01:51 2013] source mask rpix=3.0, npix_max = 48, mask sum = 34, frac = 0.700
[Mon May 13 16:01:51 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 12.98"
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src48.ximg exists
[Mon May 13 16:01:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src48.csv
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon May 13 16:01:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src48.csv
[Mon May 13 16:01:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon May 13 16:01:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon May 13 16:01:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon May 13 16:01:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:02:32 2013] Warning, spatial fit 48 centroid is now closest to src. 14
[Mon May 13 16:02:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:32 2013] Assessing source extent using major
[Mon May 13 16:02:32 2013] Source does appear to be extended
[Mon May 13 16:02:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:03:30 2013] XMMSAS src. selection expression = ellipse(23501.501007, 41463.714081, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 16:03:30 2013] Not overwriting source region fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src67_src.reg
[Mon May 13 16:03:30 2013] Extracting stamp from image fullrun_mos2_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (233, 440) - (308, 515)
[Mon May 13 16:03:30 2013] XMMSAS bgd. selection expression = annulus(23501.501007, 41463.714081, 1087.500000, 2175.000000, X, Y) && !ellipse(23744.507874, 41004.014343, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 16:03:30 2013] Writing fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src67.gif
[Mon May 13 16:14:50 2013] Mean detx,y = (3242.87, -17005.35) 
[Mon May 13 16:14:51 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 16:15:10 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 16:15:10 2013] Setting source spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon May 13 16:15:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon May 13 16:42:21 2013] Not generating rmf since there are only 40 counts
[Mon May 13 16:42:21 2013] rmf not generated due to insufficient counts
[Mon May 13 16:45:28 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:28 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src67_src_b10.pi.gz = 93.00
[Mon May 13 16:45:28 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src67_bgd.pi.gz = 210.00
[Mon May 13 16:45:28 2013] Got source and background scale factors 796808.000000, 4953852.000000
[Mon May 13 16:45:28 2013] User source parameters:
  Position = (270.7, 477.2) = 8 40 4.05 19 47 8.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 59.2 +/- 10.7
  Background aperture counts = 33.8
  Rate = 0.001 +/- 0.0002

[Mon May 13 16:45:28 2013] Updating counts from extracted products
[Mon May 13 16:45:28 2013] Set source signif. to 59.22/5.81 = 10.19
[Mon May 13 16:45:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:30 2013] Using photon index=1.80, rate=0.0013, arf fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src67.arf
[Mon May 13 16:45:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:30 2013] Updating source flux to 8.2e-14
[Mon May 13 16:45:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:45:42 2013] xmm0101440401/analysis//spectral/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete