[Mon May 13 15:59:58 2013] Detection parameters:
  Position = (166.4, 326.9) = 8 40 36.13 19 36 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.1 +/- 11.6
  Background counts = 9.2
  Rate = 0.003 +/- 0.0005

[Mon May 13 15:59:59 2013] Off-axis axis estimate = 9.79'
[Mon May 13 16:00:45 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:45 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Mon May 13 16:00:45 2013] source mask rpix=2.6, npix_max = 38, mask sum = 41, frac = 1.065
[Mon May 13 16:00:45 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 11.32"
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src13.ximg exists
[Mon May 13 16:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src13.csv
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May 13 16:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src13.csv
[Mon May 13 16:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May 13 16:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:25 2013] Warning, spatial fit 13 centroid is now closest to src. 37
[Mon May 13 16:01:25 2013] Source 36 is offset by -2.294441 and -2.885746 pixels which is larger than
2 X fitted extent = 1.424607 x 1.424607, not incorporating fit results
[Mon May 13 16:01:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:25 2013] Assessing source extent using major
[Mon May 13 16:01:25 2013] Source does appear to be extended
[Mon May 13 16:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:51 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:51 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Mon May 13 16:01:51 2013] source mask rpix=2.6, npix_max = 38, mask sum = 41, frac = 1.065
[Mon May 13 16:01:51 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 11.32"
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src12.ximg exists
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon May 13 16:01:52 2013] Fit fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src12 appears to have run properly
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon May 13 16:01:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon May 13 16:01:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 13 16:01:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:02:32 2013] Spatial fit model total counts = 159.565000, observed total counts = 149.000000
[Mon May 13 16:02:32 2013] Offset between fit and detection position for source 36 = 0.196251 pixels
[Mon May 13 16:02:32 2013] 161.177700 total counts/ 88.006000 bgd. counts: snr = 7.799864
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.196251 pixels
  Position = (166.6, 326.9) = 8 40 36.07 19 36 8.9
  Extent = 9.3 (7.4-13.0)" x 3.9 (2.9-5.0)", rotation angle = 312 (300-323) degrees
  Source counts = 73.2 +/- 12.7
  Background counts = 88.0
  Rate = 0.002 +/- 0.0003
[Mon May 13 16:02:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:02:32 2013] Source does appear to be extended
[Mon May 13 16:02:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49
[Mon May 13 16:03:29 2013] XMMSAS src. selection expression = ellipse(14448.629800, 28394.918800, 559.686616, 236.796607, 312.102900, X, Y)
[Mon May 13 16:03:29 2013] Not overwriting source region fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src36_src.reg
[Mon May 13 16:03:29 2013] Extracting stamp from image fullrun_mos2_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (134, 295) - (199, 359)
[Mon May 13 16:03:29 2013] XMMSAS bgd. selection expression = annulus(14448.629800, 28394.918800, 932.811027, 1865.622054, X, Y) && !ellipse(15281.992279, 27754.411896, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 16:03:29 2013] Writing fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src36.gif
[Mon May 13 16:04:27 2013] Mean detx,y = (-9153.77, -7181.93) 
[Mon May 13 16:04:28 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 16:04:44 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 16:04:44 2013] Setting source spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Mon May 13 16:04:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Mon May 13 16:38:23 2013] Not generating rmf since there are only 73 counts
[Mon May 13 16:38:23 2013] rmf not generated due to insufficient counts
[Mon May 13 16:45:23 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:23 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 74.00
[Mon May 13 16:45:23 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src36_bgd.pi.gz = 302.00
[Mon May 13 16:45:23 2013] Got source and background scale factors 373482.000000, 6284823.000000
[Mon May 13 16:45:23 2013] User source parameters:
  Position = (166.6, 326.9) = 8 40 36.07 19 36 8.9
  Extent = 9.3 (7.4-13.0)" x 3.9 (2.9-5.0)", rotation angle = 312 (300-323) degrees
  Source aperture counts = 56.1 +/- 9.6
  Background aperture counts = 17.9
  Rate = 0.001 +/- 0.0002

[Mon May 13 16:45:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:30 2013] Using photon index=1.80, rate=0.00161, arf fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src36.arf
[Mon May 13 16:45:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:30 2013] Updating source flux to 4.6e-14
[Mon May 13 16:45:38 2013] Flag b found in src. 36 procflags, skipping spectral fitting
[Mon May 13 16:45:38 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:45:42 2013] xmm0101440401/analysis//spectral/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete