[Mon May 13 15:59:58 2013] Detection parameters:
  Position = (252.6, 342.0) = 8 40 9.62 19 37 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.8 +/- 8.7
  Background counts = 9.8
  Rate = 0.002 +/- 0.0003

[Mon May 13 15:59:59 2013] Off-axis axis estimate = 4.59'
[Mon May 13 16:00:45 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:45 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Mon May 13 16:00:45 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.757
[Mon May 13 16:00:45 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 8.72"
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src32.ximg exists
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon May 13 16:00:46 2013] Fit fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src32 appears to have run properly
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Mon May 13 16:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:25 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 10.244102 pixels away
[Mon May 13 16:01:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:25 2013] Assessing source extent using major
[Mon May 13 16:01:25 2013] Source does appear to be extended
[Mon May 13 16:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:51 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:51 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Mon May 13 16:01:51 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.757
[Mon May 13 16:01:51 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 8.72"
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src29.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src29.csv
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src29.csv
[Mon May 13 16:01:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon May 13 16:01:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon May 13 16:01:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Mon May 13 16:01:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:02:32 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 13.456959 pixels away
[Mon May 13 16:02:32 2013] Source 35 is offset by -1.170485 and -4.729186 pixels which is larger than
2 X fitted extent = 1.406726 x 1.406726, not incorporating fit results
[Mon May 13 16:02:32 2013] Spatial fit model total counts = 223.774000, observed total counts = 153.000000
[Mon May 13 16:02:32 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 16:02:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:32 2013] Assessing source extent using major
[Mon May 13 16:02:32 2013] Source does appear to be extended
[Mon May 13 16:02:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:03:29 2013] XMMSAS src. selection expression = ellipse(21925.585800, 29706.978851, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 16:03:29 2013] Not overwriting source region fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src35_src.reg
[Mon May 13 16:03:29 2013] Extracting stamp from image fullrun_mos2_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (215, 305) - (290, 380)
[Mon May 13 16:03:29 2013] XMMSAS bgd. selection expression = annulus(21925.585800, 29706.978851, 1087.500000, 2175.000000, X, Y) && !ellipse(21469.512200, 30540.326800, 386.351211, 386.351211, 0.000000, X, Y) && !ellipse(21347.523220, 32054.236200, 420.952812, 420.952812, 0.000000, X, Y) && !ellipse(21124.147000, 31077.677400, 332.283210, 332.283210, 0.000000, X, Y) && !ellipse(23074.739563, 31007.943207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23322.708679, 31075.041107, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 16:03:29 2013] Writing fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src35.gif
[Mon May 13 16:09:16 2013] Mean detx,y = (-1583.27, -6364.23) 
[Mon May 13 16:09:17 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 16:09:36 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 16:09:37 2013] Setting source spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon May 13 16:09:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon May 13 16:40:14 2013] Not generating rmf since there are only 47 counts
[Mon May 13 16:40:14 2013] rmf not generated due to insufficient counts
[Mon May 13 16:45:25 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:25 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 103.00
[Mon May 13 16:45:26 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src35_bgd.pi.gz = 434.00
[Mon May 13 16:45:26 2013] Got source and background scale factors 1077700.000000, 8178851.000000
[Mon May 13 16:45:26 2013] User source parameters:
  Position = (252.6, 342.0) = 8 40 9.62 19 37 19.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 45.8 +/- 11.2
  Background aperture counts = 57.2
  Rate = 0.001 +/- 0.0002

[Mon May 13 16:45:26 2013] Updating counts from extracted products
[Mon May 13 16:45:26 2013] Set source signif. to 45.81/7.56 = 6.06
[Mon May 13 16:45:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:30 2013] Using photon index=1.80, rate=0.00101, arf fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src35.arf
[Mon May 13 16:45:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:30 2013] Updating source flux to 1.9e-14
[Mon May 13 16:45:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:45:42 2013] xmm0101440401/analysis//spectral/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete