[Mon May 13 15:59:57 2013] Detection parameters:
  Position = (295.0, 286.1) = 8 39 56.57 19 33 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2157.0 +/- 56.2
  Background counts = 10.5
  Rate = 0.05 +/- 0.001

[Mon May 13 15:59:59 2013] Off-axis axis estimate = 0.93'
[Mon May 13 16:00:45 2013] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:45 2013] Initial guess for spatial extent in simple fitting = 6.89"
[Mon May 13 16:00:45 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Mon May 13 16:00:45 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 6.89"
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 13 16:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src1.csv
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 13 16:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src1.csv
[Mon May 13 16:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 16:00:47 2013] Fit fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 13 16:01:25 2013] Spatial fit model total counts = 1993.190000, observed total counts = 1993.000000
[Mon May 13 16:01:25 2013] Offset between fit and detection position for source 3 = 0.044331 pixels
[Mon May 13 16:01:25 2013] 2008.752000 total counts/ 566.882000 bgd. counts: snr = 60.559150
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.044331 pixels
  Position = (295.0, 286.1) = 8 39 56.57 19 33 11.7
  Extent = 5.2 (4.9-5.4)", rotation angle = 0
  Source counts = 1441.9 +/- 44.8
  Background counts = 566.9
  Rate = 0.03 +/- 0.001
[Mon May 13 16:01:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:25 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:01:25 2013] Source does appear to be extended
[Mon May 13 16:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:51 2013] Initial guess for spatial extent in simple fitting = 5.17"
[Mon May 13 16:01:51 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.402
[Mon May 13 16:01:51 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.17"
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src1.csv
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src1.csv
[Mon May 13 16:01:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 16:01:52 2013] Fit fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 13 16:02:32 2013] Spatial fit model total counts = 1993.350000, observed total counts = 1993.000000
[Mon May 13 16:02:32 2013] Offset between fit and detection position for source 3 = 0.007674 pixels
[Mon May 13 16:02:32 2013] 2008.960000 total counts/ 568.390000 bgd. counts: snr = 60.424234
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007674 pixels
  Position = (295.0, 286.2) = 8 39 56.57 19 33 11.8
  Extent = 5.2 (4.9-5.4)", rotation angle = 0
  Source counts = 1440.6 +/- 44.8
  Background counts = 568.4
  Rate = 0.03 +/- 0.001
[Mon May 13 16:02:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:02:32 2013] Source does appear to be extended
[Mon May 13 16:02:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:03:29 2013] Counts = 1440.570000, rescaling region sizes by 2.000000
[Mon May 13 16:03:29 2013] XMMSAS src. selection expression = ellipse(25613.949860, 24846.981600, 619.034418, 619.034418, 0.000000, X, Y)
[Mon May 13 16:03:29 2013] Not overwriting source region fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_src.reg
[Mon May 13 16:03:29 2013] Extracting stamp from image fullrun_mos2_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (259, 251) - (331, 322)
[Mon May 13 16:03:29 2013] XMMSAS bgd. selection expression = annulus(25613.949860, 24846.981600, 2063.448059, 4126.896119, X, Y) && !ellipse(27279.226000, 23968.608000, 256.688807, 256.688807, 0.000000, X, Y) && !ellipse(27804.477783, 23367.899933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21925.585800, 29706.978851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27219.200470, 24667.345612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23095.803720, 26517.000200, 280.049608, 280.049608, 0.000000, X, Y)
[Mon May 13 16:03:29 2013] Writing fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3.gif
[Mon May 13 16:03:30 2013] ../../xmm0101440401/products/events/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0101440401/products/events/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon May 13 16:03:30 2013] Mean detx,y = (610.30, -695.58) 
[Mon May 13 16:03:30 2013] ../../xmm0101440401/products/images/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_src.img and ../../xmm0101440401/products/images/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon May 13 16:03:30 2013] ../../xmm0101440401/products/spectra/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0101440401/products/spectra/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon May 13 16:03:30 2013] Setting source spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 13 16:03:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 13 16:03:30 2013] ../../xmm0101440401/products/lightcurves/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0101440401/products/lightcurves/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon May 13 16:45:21 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:21 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1869.00
[Mon May 13 16:45:21 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1801.00
[Mon May 13 16:45:21 2013] Got source and background scale factors 1208000.000000, 36463832.000000
[Mon May 13 16:45:21 2013] User source parameters:
  Position = (295.0, 286.2) = 8 39 56.57 19 33 11.8
  Extent = 5.2 (4.9-5.4)", rotation angle = 0
  Source aperture counts = 1809.3 +/- 44.2
  Background aperture counts = 59.7
  Rate = 0.04 +/- 0.001

[Mon May 13 16:45:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:30 2013] Using photon index=1.80, rate=0.0317, arf fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3.arf
[Mon May 13 16:45:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:30 2013] Updating source flux to 4.2e-13
[Mon May 13 16:45:42 2013] xmm0101440401/analysis//spectral/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete