[Mon May 13 15:59:58 2013] Detection parameters:
  Position = (187.9, 365.6) = 8 40 29.54 19 38 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.1 +/- 8.2
  Background counts = 9.9
  Rate = 0.001 +/- 0.0003

[Mon May 13 15:59:59 2013] Off-axis axis estimate = 9.38'
[Mon May 13 16:00:45 2013] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:45 2013] Initial guess for spatial extent in simple fitting = 11.12"
[Mon May 13 16:00:45 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.964
[Mon May 13 16:00:45 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 11.12"
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src39.ximg exists
[Mon May 13 16:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src39.csv
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon May 13 16:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src39.csv
[Mon May 13 16:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon May 13 16:00:47 2013] Fit fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon May 13 16:01:25 2013] Spatial fit model total counts = 125.510000, observed total counts = 125.000000
[Mon May 13 16:01:25 2013] Offset between fit and detection position for source 29 = 0.571736 pixels
[Mon May 13 16:01:25 2013] 128.297000 total counts/ 102.867000 bgd. counts: snr = 2.507312
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.571736 pixels
  Position = (188.4, 365.4) = 8 40 29.37 19 38 56.3
  Extent = 6.9 (2.8-9.7)", rotation angle = 0
  Source counts = 25.4 +/- 11.3
  Background counts = 102.9
  Rate = 0.0006 +/- 0.0002
[Mon May 13 16:01:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:25 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:01:25 2013] Source does appear to be extended
[Mon May 13 16:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:51 2013] Initial guess for spatial extent in simple fitting = 6.91"
[Mon May 13 16:01:51 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.147
[Mon May 13 16:01:51 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 6.91"
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src36.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src36.csv
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src36_1.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src36.csv
[Mon May 13 16:01:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Mon May 13 16:01:53 2013] Fit fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Mon May 13 16:02:32 2013] Spatial fit model total counts = 124.998000, observed total counts = 125.000000
[Mon May 13 16:02:32 2013] Offset between fit and detection position for source 29 = 0.061461 pixels
[Mon May 13 16:02:32 2013] 127.902700 total counts/ 105.973000 bgd. counts: snr = 2.130272
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.061461 pixels
  Position = (188.4, 365.4) = 8 40 29.39 19 38 56.3
  Extent = 6.0 (2.5-9.3)", rotation angle = 0
  Source counts = 21.9 +/- 11.3
  Background counts = 106.0
  Rate = 0.0005 +/- 0.0002
[Mon May 13 16:02:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:02:32 2013] Source does appear to be extended
[Mon May 13 16:02:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:03:30 2013] XMMSAS src. selection expression = ellipse(16339.684800, 31740.883200, 358.009810, 358.009810, 0.000000, X, Y)
[Mon May 13 16:03:30 2013] Not overwriting source region fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src29_src.reg
[Mon May 13 16:03:30 2013] Extracting stamp from image fullrun_mos2_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (168, 345) - (209, 386)
[Mon May 13 16:03:30 2013] XMMSAS bgd. selection expression = annulus(16339.684800, 31740.883200, 596.683017, 1193.366034, X, Y) && !ellipse(18053.214951, 33507.039978, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 16:03:30 2013] Writing fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src29.gif
[Mon May 13 16:11:35 2013] Mean detx,y = (-6396.48, -9882.30) 
[Mon May 13 16:11:36 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 16:11:42 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 16:11:42 2013] Setting source spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon May 13 16:11:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon May 13 16:41:09 2013] Not generating rmf since there are only 21 counts
[Mon May 13 16:41:09 2013] rmf not generated due to insufficient counts
[Mon May 13 16:45:27 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:27 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 44.00
[Mon May 13 16:45:27 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src29_bgd.pi.gz = 185.00
[Mon May 13 16:45:27 2013] Got source and background scale factors 403200.000000, 3344780.000000
[Mon May 13 16:45:27 2013] User source parameters:
  Position = (188.4, 365.4) = 8 40 29.39 19 38 56.3
  Extent = 6.0 (2.5-9.3)", rotation angle = 0
  Source aperture counts = 21.7 +/- 7.7
  Background aperture counts = 22.3
  Rate = 0.0005 +/- 0.0002

[Mon May 13 16:45:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:30 2013] Using photon index=1.80, rate=0.000483, arf fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src29.arf
[Mon May 13 16:45:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:30 2013] Updating source flux to 1.3e-14
[Mon May 13 16:45:38 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:45:42 2013] xmm0101440401/analysis//spectral/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete