[Mon May 13 15:59:58 2013] Detection parameters:
  Position = (252.0, 436.2) = 8 40 9.79 19 44 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.0 +/- 8.5
  Background counts = 8.8
  Rate = 0.0008 +/- 0.0002

[Mon May 13 15:59:59 2013] Off-axis axis estimate = 10.54'
[Mon May 13 16:00:45 2013] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:45 2013] Initial guess for spatial extent in simple fitting = 11.70"
[Mon May 13 16:00:45 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.885
[Mon May 13 16:00:45 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 11.70"
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src59.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src59.csv
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src59_1.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src59.csv
[Mon May 13 16:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:48 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Mon May 13 16:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src59.csv
[Mon May 13 16:00:48 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Mon May 13 16:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src59.csv
[Mon May 13 16:00:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:25 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.533563 pixels away
[Mon May 13 16:01:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:25 2013] Assessing source extent using major
[Mon May 13 16:01:25 2013] Source does appear to be extended
[Mon May 13 16:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:51 2013] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:51 2013] Initial guess for spatial extent in simple fitting = 11.70"
[Mon May 13 16:01:51 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.885
[Mon May 13 16:01:51 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 11.70"
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src53.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src53.csv
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src53.csv
[Mon May 13 16:01:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon May 13 16:01:53 2013] Fit fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Mon May 13 16:02:32 2013] Spatial fit model total counts = 110.527000, observed total counts = 102.000000
[Mon May 13 16:02:32 2013] Offset between fit and detection position for source 16 = 0.473510 pixels
[Mon May 13 16:02:32 2013] 107.585900 total counts/ 73.364700 bgd. counts: snr = 3.995321
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.473510 pixels
  Position = (252.5, 436.3) = 8 40 9.66 19 44 5.0
  Extent = 7.5 (5.6-10.1)", rotation angle = 0
  Source counts = 34.2 +/- 10.4
  Background counts = 73.4
  Rate = 0.0008 +/- 0.0002
[Mon May 13 16:02:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:32 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:02:32 2013] Source does appear to be extended
[Mon May 13 16:02:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:03:30 2013] XMMSAS src. selection expression = ellipse(21917.235200, 37912.975400, 448.382413, 448.382413, 0.000000, X, Y)
[Mon May 13 16:03:30 2013] Not overwriting source region fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src16_src.reg
[Mon May 13 16:03:30 2013] Extracting stamp from image fullrun_mos2_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (227, 411) - (278, 462)
[Mon May 13 16:03:30 2013] XMMSAS bgd. selection expression = annulus(21917.235200, 37912.975400, 747.304022, 1494.608043, X, Y)
[Mon May 13 16:03:30 2013] Writing fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src16.gif
[Mon May 13 16:16:51 2013] Mean detx,y = (654.94, -14262.33) 
[Mon May 13 16:16:52 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 16:17:04 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 16:17:04 2013] Setting source spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon May 13 16:17:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon May 13 16:43:09 2013] Not generating rmf since there are only 34 counts
[Mon May 13 16:43:09 2013] rmf not generated due to insufficient counts
[Mon May 13 16:45:29 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:29 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 52.00
[Mon May 13 16:45:29 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src16_bgd.pi.gz = 250.00
[Mon May 13 16:45:29 2013] Got source and background scale factors 601844.000000, 4794653.000000
[Mon May 13 16:45:29 2013] User source parameters:
  Position = (252.5, 436.3) = 8 40 9.66 19 44 5.0
  Extent = 7.5 (5.6-10.1)", rotation angle = 0
  Source aperture counts = 20.6 +/- 8.3
  Background aperture counts = 31.4
  Rate = 0.0005 +/- 0.0002

[Mon May 13 16:45:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:30 2013] Using photon index=1.80, rate=0.000754, arf fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src16.arf
[Mon May 13 16:45:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:30 2013] Updating source flux to 2.2e-14
[Mon May 13 16:45:38 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:45:42 2013] xmm0101440401/analysis//spectral/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete