[Mon May 13 15:59:58 2013] Detection parameters:
  Position = (273.5, 471.9) = 8 40 3.19 19 46 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.1 +/- 9.1
  Background counts = 8.1
  Rate = 0.001 +/- 0.0002

[Mon May 13 15:59:59 2013] Off-axis axis estimate = 12.70'
[Mon May 13 16:00:45 2013] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:45 2013] Initial guess for spatial extent in simple fitting = 12.78"
[Mon May 13 16:00:45 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.036
[Mon May 13 16:00:45 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 12.78"
[Mon May 13 16:00:46 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src46.ximg exists
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src46_1.ximg exists
[Mon May 13 16:00:47 2013] Fit fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_src46 appears to have run properly
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src46.csv
[Mon May 13 16:00:47 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Mon May 13 16:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src46.csv
[Mon May 13 16:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:25 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.901101 pixels away
[Mon May 13 16:01:25 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 17.301031 pixels away
[Mon May 13 16:01:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:25 2013] Assessing source extent using major
[Mon May 13 16:01:25 2013] Source does appear to be extended
[Mon May 13 16:01:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:25 2013] Source is confused with source 67
[Mon May 13 16:01:51 2013] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:51 2013] Initial guess for spatial extent in simple fitting = 12.78"
[Mon May 13 16:01:51 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.036
[Mon May 13 16:01:51 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 12.78"
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src42.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src42.csv
[Mon May 13 16:01:52 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon May 13 16:01:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src42.csv
[Mon May 13 16:01:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon May 13 16:01:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src42.csv
[Mon May 13 16:01:53 2013] fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon May 13 16:01:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src42.csv
[Mon May 13 16:01:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:02:32 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.565917 pixels away
[Mon May 13 16:02:32 2013] Spatial fit model total counts = -2610.600000, observed total counts = 117.000000
[Mon May 13 16:02:32 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 16:02:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:32 2013] Assessing source extent using major
[Mon May 13 16:02:32 2013] Source does appear to be extended
[Mon May 13 16:02:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:03:30 2013] XMMSAS src. selection expression = ellipse(23744.507874, 41004.014343, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 16:03:30 2013] Not overwriting source region fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src14_src.reg
[Mon May 13 16:03:30 2013] Extracting stamp from image fullrun_mos2_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (236, 434) - (311, 509)
[Mon May 13 16:03:30 2013] XMMSAS bgd. selection expression = annulus(23744.507874, 41004.014343, 1087.500000, 2175.000000, X, Y) && !ellipse(23501.501007, 41463.714081, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 16:03:30 2013] Writing fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src14.gif
[Mon May 13 16:12:53 2013] Mean detx,y = (3288.01, -16861.88) 
[Mon May 13 16:12:54 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 16:13:10 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 16:13:10 2013] Setting source spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 13 16:13:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May 13 16:41:50 2013] Not generating rmf since there are only 46 counts
[Mon May 13 16:41:50 2013] rmf not generated due to insufficient counts
[Mon May 13 16:45:27 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:27 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 120.00
[Mon May 13 16:45:28 2013] Total counts from fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src14_bgd.pi.gz = 276.00
[Mon May 13 16:45:28 2013] Got source and background scale factors 1316500.000000, 6513618.000000
[Mon May 13 16:45:28 2013] User source parameters:
  Position = (273.5, 471.9) = 8 40 3.19 19 46 41.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 64.2 +/- 12.0
  Background aperture counts = 55.8
  Rate = 0.001 +/- 0.0003

[Mon May 13 16:45:28 2013] Updating counts from extracted products
[Mon May 13 16:45:28 2013] Set source signif. to 64.22/7.47 = 8.60
[Mon May 13 16:45:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:30 2013] Using photon index=1.80, rate=0.00141, arf fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src14.arf
[Mon May 13 16:45:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:30 2013] Updating source flux to 5e-14
[Mon May 13 16:45:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:45:42 2013] xmm0101440401/analysis//spectral/fullrun_mos2_xmm0101440401_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete