[Mon May 13 15:59:56 2013] Detection parameters:
  Position = (265.8, 206.3) = 8 40 5.53 19 27 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.8 +/- 8.6
  Background counts = 10.7
  Rate = 0.001 +/- 0.0002

[Mon May 13 15:59:57 2013] Off-axis axis estimate = 7.09'
[Mon May 13 16:00:43 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:43 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Mon May 13 16:00:43 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.154
[Mon May 13 16:00:43 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 9.97"
[Mon May 13 16:00:44 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src51.ximg exists
[Mon May 13 16:00:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src51.csv
[Mon May 13 16:00:44 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src51_1.ximg exists
[Mon May 13 16:00:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src51.csv
[Mon May 13 16:00:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:45 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Mon May 13 16:00:45 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Mon May 13 16:00:45 2013] Fit fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Mon May 13 16:01:14 2013] Spatial fit model total counts = 133.947000, observed total counts = 134.000000
[Mon May 13 16:01:14 2013] Offset between fit and detection position for source 55 = 0.086274 pixels
[Mon May 13 16:01:14 2013] 136.750200 total counts/ 115.772000 bgd. counts: snr = 1.949694
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.086274 pixels
  Position = (265.9, 206.2) = 8 40 5.52 19 27 24.0
  Extent = 3.6 (2.5-7.2)", rotation angle = 0
  Source counts = 21.0 +/- 11.7
  Background counts = 115.8
  Rate = 0.0005 +/- 0.0003
[Mon May 13 16:01:14 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:14 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:01:14 2013] Source does appear to be extended
[Mon May 13 16:01:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:49 2013] Initial guess for spatial extent in simple fitting = 3.58"
[Mon May 13 16:01:49 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.857
[Mon May 13 16:01:49 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 3.58"
[Mon May 13 16:01:50 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src49.ximg exists
[Mon May 13 16:01:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src49.csv
[Mon May 13 16:01:50 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon May 13 16:01:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src49.csv
[Mon May 13 16:01:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:51 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon May 13 16:01:51 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon May 13 16:01:51 2013] Fit fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Mon May 13 16:02:22 2013] Spatial fit model total counts = 136.976000, observed total counts = 137.000000
[Mon May 13 16:02:22 2013] Offset between fit and detection position for source 55 = 0.009407 pixels
[Mon May 13 16:02:22 2013] 139.486800 total counts/ 118.726000 bgd. counts: snr = 1.905334
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.009407 pixels
  Position = (265.9, 206.2) = 8 40 5.52 19 27 24.0
  Extent = 3.5 (2.2-6.9)", rotation angle = 0
  Source counts = 20.8 +/- 11.8
  Background counts = 118.7
  Rate = 0.0005 +/- 0.0003
[Mon May 13 16:02:22 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:22 2013] Assessing source extent using major axis lower bound
[Mon May 13 16:02:22 2013] Source does appear to be extended
[Mon May 13 16:02:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:03:21 2013] XMMSAS src. selection expression = ellipse(23081.301980, 17891.959000, 212.235606, 212.235606, 0.000000, X, Y)
[Mon May 13 16:03:21 2013] Not overwriting source region fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_src.reg
[Mon May 13 16:03:21 2013] Extracting stamp from image fullrun_mos1_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (254, 194) - (278, 218)
[Mon May 13 16:03:22 2013] XMMSAS bgd. selection expression = annulus(23081.301980, 17891.959000, 353.726010, 707.452020, X, Y)
[Mon May 13 16:03:22 2013] Writing fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55.gif
[Mon May 13 16:03:23 2013] ../../xmm0101440401/products/events/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_src.evt and ../../xmm0101440401/products/events/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_bgd.evt exist, delete to re-create
[Mon May 13 16:03:23 2013] Mean detx,y = (5490.53, 3608.83) 
[Mon May 13 16:03:23 2013] ../../xmm0101440401/products/images/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_src.img and ../../xmm0101440401/products/images/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_bgd.img exist, delete to re-create
[Mon May 13 16:03:23 2013] ../../xmm0101440401/products/spectra/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_src_b10.pi.gz and ../../xmm0101440401/products/spectra/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_bgd.pi exist, delete to re-create
[Mon May 13 16:03:23 2013] Setting source spectrum file to fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon May 13 16:03:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Mon May 13 16:03:23 2013] ../../xmm0101440401/products/lightcurves/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_src.lc and ../../xmm0101440401/products/lightcurves/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_bgd.lc exist, delete to re-create
[Mon May 13 16:03:29 2013] Not generating rmf since there are only 20 counts
[Mon May 13 16:03:29 2013] rmf not generated due to insufficient counts
[Mon May 13 16:03:29 2013] fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55.arf exists, delete to re-create
[Mon May 13 16:45:19 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:19 2013] Total counts from fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 30.00
[Mon May 13 16:45:19 2013] Total counts from fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_bgd.pi.gz = 71.00
[Mon May 13 16:45:19 2013] Got source and background scale factors 147200.000000, 1182400.000000
[Mon May 13 16:45:19 2013] User source parameters:
  Position = (265.9, 206.2) = 8 40 5.52 19 27 24.0
  Extent = 3.5 (2.2-6.9)", rotation angle = 0
  Source aperture counts = 21.2 +/- 6.5
  Background aperture counts = 8.8
  Rate = 0.0005 +/- 0.0001

[Mon May 13 16:45:21 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:21 2013] Using photon index=1.80, rate=0.000458, arf fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55.arf
[Mon May 13 16:45:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:21 2013] Updating source flux to 1e-14
[Mon May 13 16:45:34 2013] Source 55 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 16:45:38 2013] xmm0101440401/analysis//spectral/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete