[Mon May 13 15:59:55 2013] Detection parameters:
  Position = (425.8, 419.6) = 8 39 16.26 19 42 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 8.6
  Background counts = 7.1
  Rate = 0.001 +/- 0.0002

[Mon May 13 15:59:57 2013] Off-axis axis estimate = 12.74'
[Mon May 13 16:00:43 2013] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:00:43 2013] Initial guess for spatial extent in simple fitting = 12.80"
[Mon May 13 16:00:43 2013] source mask rpix=2.9, npix_max = 47, mask sum = 46, frac = 0.970
[Mon May 13 16:00:43 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 12.80"
[Mon May 13 16:00:44 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src56.ximg exists
[Mon May 13 16:00:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src56.csv
[Mon May 13 16:00:44 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src56_1.ximg exists
[Mon May 13 16:00:44 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src56.csv
[Mon May 13 16:00:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:00:45 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Mon May 13 16:00:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Mon May 13 16:00:45 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Mon May 13 16:00:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Mon May 13 16:00:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440401_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:14 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 16.310722 pixels away
[Mon May 13 16:01:14 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:01:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:01:14 2013] Assessing source extent using major
[Mon May 13 16:01:14 2013] Source does appear to be extended
[Mon May 13 16:01:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:01:49 2013] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:01:49 2013] Initial guess for spatial extent in simple fitting = 12.80"
[Mon May 13 16:01:49 2013] source mask rpix=2.9, npix_max = 47, mask sum = 46, frac = 0.970
[Mon May 13 16:01:49 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 12.80"
[Mon May 13 16:01:50 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src53.ximg exists
[Mon May 13 16:01:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src53.csv
[Mon May 13 16:01:50 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon May 13 16:01:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src53.csv
[Mon May 13 16:01:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:01:51 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon May 13 16:01:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon May 13 16:01:51 2013] fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon May 13 16:01:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Mon May 13 16:01:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440401_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:02:22 2013] Spatial fit model total counts = 141.379000, observed total counts = 110.000000
[Mon May 13 16:02:22 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 16:02:22 2013] Vigneting correction estimate = 1.000000
[Mon May 13 16:02:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 16:02:22 2013] Assessing source extent using major
[Mon May 13 16:02:22 2013] Source does appear to be extended
[Mon May 13 16:02:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 16:03:22 2013] XMMSAS src. selection expression = ellipse(36996.016632, 36455.046448, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 16:03:22 2013] Not overwriting source region fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_src.reg
[Mon May 13 16:03:22 2013] Extracting stamp from image fullrun_mos1_xmm0101440401_pi300-10000_cl_sm2.00.img.gz, (388, 382) - (463, 457)
[Mon May 13 16:03:22 2013] XMMSAS bgd. selection expression = annulus(36996.016632, 36455.046448, 1087.500000, 2175.000000, X, Y)
[Mon May 13 16:03:22 2013] Writing fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18.gif
[Mon May 13 16:03:23 2013] ../../xmm0101440401/products/events/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0101440401/products/events/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Mon May 13 16:03:23 2013] Mean detx,y = (-8369.00, -14836.16) 
[Mon May 13 16:03:23 2013] ../../xmm0101440401/products/images/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_src.img and ../../xmm0101440401/products/images/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Mon May 13 16:03:23 2013] ../../xmm0101440401/products/spectra/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0101440401/products/spectra/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Mon May 13 16:03:23 2013] Setting source spectrum file to fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 13 16:03:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon May 13 16:03:23 2013] ../../xmm0101440401/products/lightcurves/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0101440401/products/lightcurves/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Mon May 13 16:03:29 2013] Not generating rmf since there are only 43 counts
[Mon May 13 16:03:29 2013] rmf not generated due to insufficient counts
[Mon May 13 16:03:29 2013] fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Mon May 13 16:45:19 2013] Updating aperture counts using extracted products
[Mon May 13 16:45:19 2013] Total counts from fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 77.00
[Mon May 13 16:45:19 2013] Total counts from fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 192.00
[Mon May 13 16:45:19 2013] Got source and background scale factors 858070.000000, 5573206.000000
[Mon May 13 16:45:19 2013] User source parameters:
  Position = (425.8, 419.6) = 8 39 16.26 19 42 53.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.4 +/- 9.8
  Background aperture counts = 29.6
  Rate = 0.001 +/- 0.0002

[Mon May 13 16:45:19 2013] Updating counts from extracted products
[Mon May 13 16:45:19 2013] Set source signif. to 47.44/5.44 = 8.73
[Mon May 13 16:45:21 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 16:45:21 2013] Using photon index=1.80, rate=0.00105, arf fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18.arf
[Mon May 13 16:45:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 16:45:21 2013] Updating source flux to 5.6e-14
[Mon May 13 16:45:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 16:45:38 2013] xmm0101440401/analysis//spectral/fullrun_mos1_xmm0101440401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete