[Wed May 29 10:58:14 2013] Detection parameters:
  Position = (378.6, 323.2) = 5 38 25.29 -2 35 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.9 +/- 15.8
  Background counts = 42.0
  Rate = 0.004 +/- 0.0005

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 6.09'
[Wed May 29 10:59:10 2013] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 9.47"
[Wed May 29 10:59:10 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.872
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 77 for pass 0, mean size = 9.47"
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src77.ximg exists
[Wed May 29 10:59:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src77.csv
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src77_1.ximg exists
[Wed May 29 10:59:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src77.csv
[Wed May 29 10:59:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src77.csv
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src77.csv
[Wed May 29 10:59:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:43 2013] Warning, spatial fit 77 centroid is now closest to src. 20
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:33 2013] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 9.47"
[Wed May 29 11:00:33 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.872
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 9.47"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src65.ximg exists
[Wed May 29 11:00:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src65.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src65_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src65.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65.csv
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65.csv
[Wed May 29 11:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:57 2013] Source 87 is offset by 2.496614 and -7.573629 pixels which is larger than
2 X fitted extent = 6.521099 x 6.796690, not incorporating fit results
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:48 2013] XMMSAS src. selection expression = ellipse(32893.964508, 28071.908264, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:01:48 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src87_src.reg
[Wed May 29 11:01:48 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (341, 286) - (416, 361)
[Wed May 29 11:01:48 2013] XMMSAS bgd. selection expression = annulus(32893.964508, 28071.908264, 1087.500000, 2175.000000, X, Y) && !ellipse(28923.912476, 28989.260712, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30192.437683, 29670.198730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29901.058838, 29249.413757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31749.232697, 27604.264679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30599.376678, 28053.893890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32533.135406, 29448.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33152.638400, 26228.272800, 572.648016, 572.648016, 0.000000, X, Y) && !ellipse(34398.192596, 25175.571320, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 11:01:48 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src87.gif
[Wed May 29 11:08:10 2013] Mean detx,y = (5999.76, -419.27) 
[Wed May 29 11:08:13 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 11:08:34 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 11:08:35 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed May 29 11:08:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Wed May 29 19:42:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:42:09 2013] rmf not generated due to insufficient counts
[Wed May 29 19:59:46 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:46 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src87_src_b10.pi.gz = 361.00
[Wed May 29 19:59:46 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src87_bgd.pi.gz = 1052.00
[Wed May 29 19:59:47 2013] Got source and background scale factors 1288366.000000, 4912141.000000
[Wed May 29 19:59:47 2013] User source parameters:
  Position = (378.6, 323.2) = 5 38 25.29 -2 35 36.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 85.1 +/- 20.0
  Background aperture counts = 275.9
  Rate = 0.002 +/- 0.0005

[Wed May 29 19:59:47 2013] Updating counts from extracted products
[Wed May 29 19:59:47 2013] Set source signif. to 85.08/16.61 = 5.12
[Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.00208, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src87.arf
[Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:50 2013] Updating source flux to 1.1e-14
[Wed May 29 20:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src87_pl.csv not found, spectral fit skipped or did not complete