[Wed May 29 10:58:13 2013] Detection parameters: Position = (352.3, 490.4) = 5 38 32.96 -2 23 28.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 59.1 +/- 13.2 Background counts = 33.0 Rate = 0.001 +/- 0.0003 [Wed May 29 10:58:15 2013] Off-axis axis estimate = 14.45' [Wed May 29 10:59:10 2013] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting [Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 13.66" [Wed May 29 10:59:10 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.925 [Wed May 29 10:59:10 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 13.66" [Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src61.ximg exists [Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src61_1.ximg exists [Wed May 29 10:59:12 2013] Fit fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src61 appears to have run properly [Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists [Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists [Wed May 29 10:59:14 2013] Fit fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly [Wed May 29 10:59:43 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 13.729551 pixels away [Wed May 29 10:59:43 2013] Spatial fit model total counts = 490.109000, observed total counts = 483.000000 [Wed May 29 10:59:43 2013] Offset between fit and detection position for source 70 = 4.389467 pixels [Wed May 29 10:59:43 2013] 476.408000 total counts/ 207.151000 bgd. counts: snr = 18.707833 Spatial fit parameters: Offset between fit and detection position for source 70 = 4.389467 pixels Position = (356.6, 490.7) = 5 38 31.69 -2 23 29.0 Extent = 27.3 (27.3-27.3)", rotation angle = 0 Source counts = 269.3 +/- 21.8 Background counts = 207.2 Rate = 0.007 +/- 0.0005 [Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000 [Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 10:59:43 2013] Assessing source extent using major axis lower bound [Wed May 29 10:59:43 2013] Source does appear to be extended [Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 10:59:43 2013] Source is confused with source 69 [Wed May 29 11:00:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 29 11:00:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 27.30" [Wed May 29 11:00:33 2013] source mask rpix=6.3, npix_max = 183, mask sum = 182, frac = 0.991 [Wed May 29 11:00:33 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 27.30" [Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src59.ximg exists [Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src59.csv [Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src59_1.ximg exists [Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src59.csv [Wed May 29 11:00:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src59_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists [Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59.csv [Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists [Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59.csv [Wed May 29 11:00:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:00:57 2013] Warning, spatial fit 59 centroid is now closest to src. 40 [Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000 [Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 11:00:57 2013] Assessing source extent using major axis lower bound [Wed May 29 11:00:57 2013] Source does appear to be extended [Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 11:01:48 2013] XMMSAS src. selection expression = ellipse(30978.678000, 42645.208400, 1638.096047, 1638.096047, 0.000000, X, Y) [Wed May 29 11:01:48 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src70_src.reg [Wed May 29 11:01:48 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (262, 397) - (451, 585) [Wed May 29 11:01:48 2013] XMMSAS bgd. selection expression = annulus(30978.678000, 42645.208400, 2730.160079, 5460.320157, X, Y) && !ellipse(26054.875040, 38145.287600, 608.007217, 406.946412, 343.771100, X, Y) && !ellipse(33882.148000, 41476.518480, 512.240815, 512.240815, 0.000000, X, Y) && !ellipse(25584.400696, 40813.760254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27996.709869, 36833.393433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.302200, 42498.862600, 324.360809, 324.360809, 0.000000, X, Y) && !ellipse(25312.517731, 38647.418304, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 29 11:01:48 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src70.gif [Wed May 29 11:02:22 2013] Mean detx,y = (4771.12, -15004.25) [Wed May 29 11:02:26 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 29 11:04:04 2013] Binned source spectrum to 10 counts/bin [Wed May 29 11:04:05 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src70_src_b10.pi.gz [Wed May 29 11:04:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src70_bgd.pi.gz [Wed May 29 19:59:45 2013] Updating aperture counts using extracted products [Wed May 29 19:59:45 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 1533.00 [Wed May 29 19:59:45 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src70_bgd.pi.gz = 5786.00 [Wed May 29 19:59:45 2013] Got source and background scale factors 7864715.000000, 30042816.000000 [Wed May 29 19:59:45 2013] User source parameters: Position = (356.6, 490.7) = 5 38 31.69 -2 23 29.0 Extent = 27.3 (27.3-27.3)", rotation angle = 0 Source aperture counts = 18.3 +/- 40.2 Background aperture counts = 1514.7 Rate = 0.0004 +/- 0.001 [Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.00659, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src70.arf [Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 19:59:50 2013] Updating source flux to 6.7e-14 [Wed May 29 20:00:54 2013] Flag c found in src. 70 procflags, skipping spectral fitting [Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete